HT201311: About AirPrint
Learn about About AirPrint
-
All replies
-
Helpful answers
-
Sep 21, 2013 7:27 PM in response to callawaykjby rbrylawski,Often when the No Airprint Printers Found message happens, the Router Firmware needs to be updated. Check for an update for your Belkin router and if there is an update, it will likely solve the problem.
-
-
Sep 21, 2013 7:41 PM in response to callawaykjby deggie,From everything I can fnd this router, despite upgrades, does not handle Bonjour packets correctly so you probably won't be able to get it to work.
-
Sep 21, 2013 7:52 PM in response to deggieby callawaykj,deggie-thanks! That would explain alot...I have tried all I know to fix it and so far no success. Thanks again!
-
Sep 21, 2013 7:54 PM in response to callawaykjby Diavonex,Setup AirPrint Printer
1. Buy an AirPrint enabled printer; see list below
http://support.apple.com/kb/ht4356
2. Run the CD provided and set printer and iPad on the same network
3. Start printing from your iPad using AirPrint
-
Sep 21, 2013 7:55 PM in response to callawaykjby Diavonex,Setup a typical HP AirPrint Printer
1. Insert the CD into the CD drive of the computer, and then wait a few seconds for the software installer to start.
2. Accept the installation agreements, and then click Next . It might take several minutes for your computer to install the printer software.
3. You will be asked to connect printer to computer with USB cable
4. You will be ask how you want to connect to printer, select Network (Ethernet/Wireless) and then click Next.
5. Setup will access computer and router for wireless settings.
6. Setup will ask if you want to use wireless settings (SSID and Password) to setup printer. Select Yes and press Next.
7. Setup will then send wireless settings to printer.
8. Once printer is setup, you will be ask to remove USB cable.
9. The printer is now ready for AirPrint.