Currently Being ModeratedOct 13, 2013 3:19 AM (in response to Mononaural)
I forgot to write that now none of my tv's, not my beamer and not my new Asus 27" via hdmi is detectet from my macbook (21012). Not for absecond. When plugging in mac goes blue for two seconds and them back to normal
Without finding anything.
The macbook from my son 2009 works fine everywhrere...
Must have something to do with the thunderbolt !?
Currently Being ModeratedOct 15, 2013 6:08 AM (in response to Angelo59)
I just decided to send the Asus 27" back to Amazon and ordered a 29" from Dell with integratet MiniDisplayPort.
Got it today. Works great.
I gave up to try the Asus Monitor because i dont want to have those
Problems in some weeks again.
Currently Being ModeratedOct 20, 2013 4:24 PM (in response to Ponponhead)
I have a MacBook Pro late 2011 and I was having problems also. My TV would show my computer display for a few seconds and then snow (as if it were scanning through channels). What I did was changed my display on my Mac to a 720 display and its been working.
I have a cheap mdp to hdmi I bought from Amazon.
I still can't get it to work through my reciever but it works fine straight to my TV.
Currently Being ModeratedOct 22, 2013 5:14 AM (in response to Ponponhead)
I also had problems with connecting MacBookPro 15" (late 2010) with external monitor. I bought a cheap adaptor from Hong-Kong and after trying different "work arounds" now it is working on Benq 24" very good. Maybe this will be useful for someone:
In case your attached monitor is recognised in the Display (under System Preferences in OSX) but the monitor does not display anything (and just stays OFF or "No signal message") what you coud do is to manually configure the external monitor to connect to specific HDMI port where you have connected the laptop. i.e. when your laptop is ON and connected to the external monitor turn ON the external monitor and choose the proper HDMI port.
Hope it helps!
Currently Being ModeratedOct 24, 2013 8:15 AM (in response to Ponponhead)
What a bummer! Mavericks came and still no fix. I am extremely disappointed in Apple. I just want to say that I've been a Mac user for years now an that I've owned several iMacs and Mac Pros. I have never experienced any problems with those machines, they stream beautifully over HDMI (using the mini displayport). Then I bought their MacBook... You would think that spending over $2,600.00 on a laptop would let you stream over HDMI with no problems, but apparently a cheap no-brand $300 computer can do what my overly expensive machine can't. Again... what a bummer! Starting to consider a laptop PC so I can make my presentations.
Currently Being ModeratedOct 27, 2013 10:15 AM (in response to Ponponhead)
I wanted to share some trouble I have been having with my Thunderbolt to HDMI and Thunderbolt to DVI adapters. Last week, my MacBook fried three of them. I ordered two more from Monoprice (part number 5311), and as of this morning, they too have been fried. What I've found is that if I have them connected when I either restart the laptop or cold boot it, it kills them. Has anyone else seen this issue?
MacBook specs: Early 2011 model 8,1. 2.7 GHz Core i7, 8 GB RAM, 250 GB Samsung SSD. Driving me crazy.
Currently Being ModeratedOct 29, 2013 4:02 PM (in response to Ponponhead)
Am hoping someone can help me out.
I have been using this cable to connect my MacBook Pro to my Sony HDTV since January. Last week it was working fine on another TV in my house. I brought the laptop and cable into my room to return it to its usual position and the casing on the end that goes into the TV came apart. It then stopped working. I chalked that up to me touching or ruining the cables/bits inside.
I ordered another one last week and it simply doesn't. I figured I'd be able to pick up where I left off but when I plug the cable in the screen doesn't flash, change or anything. It has no effect on the computer. I've tried the usual things. When I select detect display nothing happened. I figured the cable was defective and ordered another one. Same problem.
Any thoughts guys? Appreciate it. (BTW, I have upgraded to Maverick, if that might make a difference).
Currently Being ModeratedNov 2, 2013 1:10 PM (in response to Ponponhead)
I've got the same problem. Sometimes it works like a old-piece-of-trash car. I have to keep trying and trying many ways to detect my Panasonic TV.
I have a MBP Late 2008. And is a pain to watch anything under minidisplay-TV.
Everyday that i was tried, I did . But it took at least 20 minutes to detect the TV. Again...the same process: Turn off TV and HT. Turn on. Restart MBP. And so many possibilitites that I`ve never imagined was possible with one computer, TV and HT.
After Mavericks, nothing has changed. It's really frustrating.
If there is anybody with a solution, I really appreciate it.
Thank you all!
Currently Being ModeratedNov 2, 2013 2:22 PM (in response to Eklon)
Okay guys here is what I did. I contacted my adapter manufacturer MOSHI and they replaced the old one with the new and it works without any problems. Just make sure you have he receipt and contact your adapter manufacturer they will fix it. Thats how I did after complaining about my macbook pro which was not the problem apparently. Good Luck!
Currently Being ModeratedNov 2, 2013 2:44 PM (in response to Ponponhead)
Guys! I did one thing that worked that time. Maybe another clue for our issue:
In the Sound Preferences, my MBP has only the Build In Devices and one Multi Output Devices.
Then I created another Multoutput devices and changed the channel from HT to Game and back do BD channel...and it`s just DETECTED PERFECTLY!
Now I need to watch all the stuff I had buffered...then I`ll confirm if this is the way!
Currently Being ModeratedNov 6, 2013 6:49 PM (in response to Eklon)
I am having the same issues with my macbook pro 10.8.5 since upgrading. I did the Pram and smc reset but now it won't even engage the Samsung tv. It shows the hdmi input but when I plug it in to Thunderbolt /mini display with the moshi adapter screen turns blue for a second but doesn't engage on TV. The work around before I reset the Pram and smc that Apple advised was to shut down Mac completely shut lid and restart. Now that won't even work. Does anyone have a solution yet?
Thanks in advance,
More Like This
- Retrieving data ...
- This solved my question - 10 points
- This helped me - 5 points