4 Replies Latest reply: Oct 28, 2013 8:52 PM by azartguy
azartguy Level 1 Level 1 (0 points)

I am back using Aperture now that the update to 3.5 has solved a nagging problem of occasionally not recogniging PSD files. However...

 

The update created a new Library and most of my files are in the previous version Library. I know I can switch back and forth in File>Library>Other, but can I merge the two so all the files are in the same place?

 

Brian


Aperture 3, OS X Mavericks (10.9)
  • 1. Re: Sync Aperture 3.5 library
    léonie Level 9 Level 9 (51,780 points)
    The update created a new Library

     

    That is unusual. The update should have opened your previous Aperture library just fine. Is your previous Aperture library on an external volume? And is that volume not formatted for mac?

     

    However, you should be able to import your previous Aperture library into your current Aperture library or vice versa.

    See the manual page:  Working with Library Files (the paragraph on  Merging Libraries)

  • 2. Re: Sync Aperture 3.5 library
    azartguy Level 1 Level 1 (0 points)

    LEONIE,

    This doesn't work. I can export to the desktop as a "new" library, but Aperture is only "seeing" one Library even though when I switch using File>Library>Other it goes to the "old" Library, but then it doesn't see the "new" Library.

     

    Put another way, both Libraries seem to be there, but only one can be seen one at a time.

     

    I'm (slowly) exporting the "old" Library to the desktop, but I don't know if the "new" Library will accept it as folder or not.

     

    Both are in "Pictures" on the HD, where they've always been, but only shows up at a time; whichever one I last used is the one I see/open. But it can't import one to another because it can't "see" both Libraries at the same time.

     

    It might be that the process only works with two seprate computers, not wihin the same computer?

     

    Sorry if that doesn't make much sense, but that's how it looks.

     

    Brian

  • 3. Re: Sync Aperture 3.5 library
    Frank Caggiano Level 7 Level 7 (23,875 points)

    To import one library into another you use the command File->Import->Library…

     

    So in your case you would open one of the libraries and then use the above command to import the other library.

     

    Screen Shot 2013-10-28 at 20.41.43 .png

  • 4. Re: Sync Aperture 3.5 library
    azartguy Level 1 Level 1 (0 points)

    Frank,

    It took a while but I finally tracked down the "old" Library. I had apparently moved it, stuck it in a subfolder and lost track of it. Once found I got the two libraries merged and all is well. Thanks to you and Leoni,

    Brian