1 Reply Latest reply: Nov 2, 2013 9:01 AM by sterling r
BALDY7 Level 1 Level 1 (0 points)

I HAVE JUST INSTALLED MAVERICKS OS.IT APPEARS IT IS NOT COMPATIBLE WITH MY PRINTER WHICH IS AN EPSON WORKFORCE PRO WP-5630 SERIES 2.What can i do about this problem?


MacBook Pro, OS X Mavericks (10.9)
  • 1.
    sterling r Community Specialists Community Specialists (3,785 points)

    Hello Baldy7,

     

    It sounds like after updating to Mac OS X 10.9 your printer is no longer working with the computer. U want to recommend these steps from the article named:

    Troubleshooting printer issues in OS X

    http://support.apple.com/kb/TS3147

    1. Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    2. Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    3. Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    4. Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    5. Delete the affected printer, then add the printer again.

    If the issue persists, try these additional steps:

    1. Reset the printing system, then add the printer again.
    2. If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    3. Contact the printer vendor or visit their website for further assistance.

    Additional Information

    Note: If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB.  For more details, see this article.

     

    Thank you for using Apple Support Communities.

    All the very best,

    Sterling