Skip navigation

How can I reformat my portable hard drive?

105 Views 1 Reply Latest reply: Nov 3, 2013 6:27 AM by LowLuster RSS
Jerry Dammers Level 1 Level 1 (0 points)
Currently Being Moderated
Nov 3, 2013 6:18 AM

I have a Seagate 1TB portable hard drive, connected by USB to my MacBook Pro.

 

I use it as my Time Machine.

 

I have been getting error messages saying the drive is not working.

 

I have tried to repair it via Disk Utility but get this message:

 

Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.

 

1. How can I repair it and protect the files I have on it?

 

2. Alternatively, how can I wipe it and start again as a new Time Machine?

 

Thank you

  • LowLuster Level 6 Level 6 (11,810 points)
    Currently Being Moderated
    Nov 3, 2013 6:27 AM (in response to Jerry Dammers)

    In Disk Utility select that external drive then click the Partition tab. Then select One partition from the Partition Layout drop down and make sure it is set to a GUID partition table, that is under the Options button, and the format is set to Mac OS Extended (Journaled).

     

    Then Click the Apply Button. If the drive is still good it will be partitions and formatted and then can be used for a TM backup drive.

     

     

    But I suspect either the drive is failing or the electronics in the drive enclosure are failing. In the first case there isn't much you can do about a failing hard drive except replace it. On the second part if the enclosure electronics are failing then you can take the physical hard drive out that enclosure and connect it to your mac with a SATA to USB adapter or put it in another enclosure.

     

    Then you have the simple fact the Apple Mac notebook computers always seem to have a problem with these USB Bus powered external hard drives. It seems the USB port on Mac notebook don't put out enough power on the USB port to fully power up these type of drives. They do some times but not always. One work around for that is to use a Y USB cable that connect to 2 USB ports at the same time to supply more power to the drive.

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.