Currently Being ModeratedOct 1, 2013 6:24 AM (in response to mustang designer)
Purchased a LMP keypad off ebay. Put in new batteries and tried to pair with my iMac 2010 running latest ML. No luck.
turn on keypad using slide switch on side of unit
press reset button on back of unit and green light on front blinks green
click on bluetooth icon on menu bar then setup bluetooth device
iMac finds the keypad and gives me the 8 digit pairing code
enter code and press enter key
after a short wait get error code that pairing was un successful.
any ideas anyone??
I did notice some of these units have a push button instead of slide switch on side for on/off.
Currently Being ModeratedOct 27, 2013 8:10 AM (in response to Engelhardt)
My LMP Keypad (Number Pad) just stopped working. I changed the batteries but still no luck. I remembered that there was a special procedure to pair the device so I ended up in this Forum.
The suggestion from kristinfrommy 4/18/12 worked for me. It can be a little confusing because the Bluetooth device info in the Mac keeps referring to the device as a keypad as opposed to a number pad.
So basically you delete the Keypad (number pad) and then add it back. I did shut down the Mac (twice) following the directions.
It also appears that there are different designs of the LMP number pad. My number pad has an on/off switch, not a button. I never saw a green light.
Last but not least: My number pad is 2 years old. About a year ago it stopped working and I could not get it to work. I brought it back to the Apple Store and they replaced it.
Currently Being ModeratedDec 1, 2013 1:14 PM (in response to kristinfromny)
THANK YOU, Kristin! Your help ended a six month long process of trying to fix this problem! Yay!!!
Currently Being ModeratedJan 1, 2014 11:03 AM (in response to rwpmass)
Sorry for my very bad english, but it's not my mother tongue ...
I have an iMac 27'' (3.5 GHz intel Core 7) with 10.9.1.
My LMP keypad works fine on my MacPro (10.6.8).
But impossible to connect the keypad to the iMac 27'' :
- the keypad appears in sys pref/bluetooth
- I click on 'activate pairing'
- the grey wheel for a few seconds
- then getting the failed to pair message (in french 'le jumelage a échoué')
Is it an incompatibility between mavericks and third part bluetooth keypad ?
Currently Being ModeratedJan 4, 2014 9:45 AM (in response to LillydogCH)
See my post above.
Currently Being ModeratedJan 8, 2014 11:10 PM (in response to Gino45)
Thank you but the suggestion from kristinfrommy 4/18/12 doesn't worked for me.
Currently Being ModeratedFeb 28, 2014 2:19 AM (in response to kristinfromny)
I was thinking of throwing the keypad in the wall when I tried the Companys answer and instructions to kristinfromny(look att the beginning of this treadh, 18 april 2012), and it really worked. But in OSX 10.9.2 you don´t have an +-option. Follow the instructions and mark the Blutooth symbol in system preferences and it will work. Its important that you shut down the computer two times. Follow the instructions carefullly!