cgspain

Q: Asus N10 USB adaptor with EMac 10.3.9

Hi I've just got an Asus N10 USB adaptor to use on an Emac running 10.3.9 but the drivers seem to start at 10.4. Any solutions? Thanks

Posted on Jan 28, 2014 3:59 AM

Close

Q: Asus N10 USB adaptor with EMac 10.3.9

  • All replies
  • Helpful answers

  • by Jan Hedlund,

    Jan Hedlund Jan Hedlund Jan 28, 2014 9:08 AM in response to cgspain
    Level 6 (9,869 points)
    Jan 28, 2014 9:08 AM in response to cgspain

    Yes, the ASUS web site does not appear to offer USB-N10 drivers for anything before Mac OS X 10.4 (there was a USB-N13 adapter with older Mac OS X 10.3 drivers, but that model is probably based on a different chipset).

     

    Unfortunately, this is not an unusual problem with USB Wi-Fi adapters. Special driver software is typically needed, but often not available for earlier Mac operating systems. What you can do in a case like this is to try to find an older driver version (may not exist at all) from the supplier, or to check whether there is a suitable driver from another source for the same chipset. Also, one should perhaps not completely rule out that a driver for a newer system version in fact may work with Mac OS 10.3.9 (unless you have tested that already).

     

    A general advice for older Macintosh computers is to use a wireless Ethernet bridge (also known as a gaming or media adapter) connected to the Ethernet port instead. Examples include Netgear WNCE2001 and Linksys WET610N. This kind of bridge device does not normally require special drivers, and can thus be used under almost any operating system.

     

    Jan

  • by cgspain,

    cgspain cgspain Jan 28, 2014 10:07 AM in response to Jan Hedlund
    Level 1 (10 points)
    Jan 28, 2014 10:07 AM in response to Jan Hedlund

    Thanks Jan Hedlund for your advice. It is an old computer which I have had stored in the cupboard and thought I would hook it up to Wifi and my kids can play on it, so I don't really want to spend very much. Do you think the Asus N13 will work on it with the correct drivers?

  • by cgspain,

    cgspain cgspain Jan 28, 2014 10:52 AM in response to cgspain
    Level 1 (10 points)
    Jan 28, 2014 10:52 AM in response to cgspain

    Or could I plug an ethernet cable into the Airport Express I have upstairs extending my network?

  • by Jan Hedlund,

    Jan Hedlund Jan Hedlund Jan 28, 2014 12:47 PM in response to cgspain
    Level 6 (9,869 points)
    Jan 28, 2014 12:47 PM in response to cgspain

    Hi,

     

    >Do you think the Asus N13 will work on it with the correct drivers?

     

    At least according to the following web page, the USB-N13 appears to have support for Mac OS X 10.3:

    http://www.asus.com/Networking/USBN13/#specifications

     

    See also the page below for drivers:

    http://support.asus.com/Download.aspx?SLanguage=en&m=USB-N13&os=30

     

    However, do check that the above is valid for exactly the variant sold before you buy.

     

    Depending on the eMac version, you will have either USB 1.1 or USB 2.0. A Wi-Fi adapter connected to USB 1.1 port ought to work, but the maximum speed will be limited.

     

    Anyway, a wireless Ethernet bridge (which does not have to be that expensive) connected to the Ethernet port would be my recommendation in a case like this one.

     

    Jan

  • by Jan Hedlund,

    Jan Hedlund Jan Hedlund Jan 28, 2014 12:50 PM in response to cgspain
    Level 6 (9,869 points)
    Jan 28, 2014 12:50 PM in response to cgspain

    >Or could I plug an ethernet cable into the Airport Express I have upstairs extending my network?

     

    There are different versions of the AirPort Express with different Ethernet capabilities. Which generation AirPort Express is it?

     

    How are the Wi-Fi devices arranged today? Is the Express wirelessly connected to an AirPort Extreme base station?

     

    Jan

  • by cgspain,

    cgspain cgspain Jan 28, 2014 12:49 PM in response to Jan Hedlund
    Level 1 (10 points)
    Jan 28, 2014 12:49 PM in response to Jan Hedlund

    Hi, It's second generation I think and it is wireless connected to an Airport Extreme base station, extending the wifi to the upper floor. Obviously the easiest way is to try it out - I haven't a spare ethernet cable here right now but will try to locate one.

    Thanks

  • by Jan Hedlund,Solvedanswer

    Jan Hedlund Jan Hedlund Jan 28, 2014 11:11 PM in response to cgspain
    Level 6 (9,869 points)
    Jan 28, 2014 11:11 PM in response to cgspain

    An 802.11n AirPort Express could per se act as a wireless Ethernet bridge device, to join an existing Wi-Fi network.

     

    http://support.apple.com/kb/ht1731

     

    However, the situation here is different. Since the AirPort Express in your case is used to somehow extend a network, it would probably not be a bad idea to try one of the AirPort support areas instead for expert advice. Good luck!

     

    Jan

  • by cgspain,

    cgspain cgspain Jan 29, 2014 6:22 AM in response to Jan Hedlund
    Level 1 (10 points)
    Jan 29, 2014 6:22 AM in response to Jan Hedlund

    Thanks Jan for your help.

  • by cgspain,

    cgspain cgspain Jan 30, 2014 9:49 AM in response to cgspain
    Level 1 (10 points)
    Jan 30, 2014 9:49 AM in response to cgspain

    In spite of talking to two Mac 'experts' neither advised me to simply plug it in to the Airport Express and it worked!