Q: Time Capsule(s) & Time Machine = No connection
I'm a confused individual at the moment, so bear with me:
I've used a Time Capsule (TC) as my back-up drive (not as a router) for 4+ years without a hitch.
Yesterday I got a message from Time Machine (TM) that there was not enough space on my 500GB TC for a back-up. After excluding some folders for back-up, I told TM to do a back-up. The ensuing back-up proceeded but quickly became glacially slow, and then didn't finish backing up. I don't recall the error message(s).
So I did a soft reset, then a hard reset, and then a factory reset. Now the amber light flashes slowly, and Airport Utility can't find the TC.
Knowing I'd need a larger back-up drive eventually anyway, today I bought a new 3TB Time Capsule. Plug it in, Airport Utility can't find it, and its amber light flashes slowly.
It shouldn't matter that I'm not using the Time Capsule(s) as a router, right? They're just AC plugged in, no other wired connections.
Where do I start to troubleshoot this? Is it possible there's some problem with my iMac?
Mac OS X (10.7.5), 3.06 4GB 1TB; 2.53 4GB 250GB;
Posted on May 25, 2014 12:08 PM
To set up the new device to work wireless, you need to configure it.
Once it is seen set up, then it would not need wires. You could use
a wireless portable computer or any other, it will backup your files
via Time Machine, and also go online for web access.
It is designed to work as wi-fi router for the internet, so if it is to be a
primary access point and gateway to the internet as well as backup
then it would need to be wired. Unless it could be set up as a repeater.
Some models of AirPort Extreme can be used as repeaters, too. Yet
a link between the cable or ISP box and this device on setup is an
Ethernet cable. As a primary unit, it should be left that way.
For security purposes, one may need to consider how these are set
up, and a wired connection to the Time Capsule may be better if it
is to be a center of backup and internet access, or shared wireless
between several Macs, devices, and the internet.
Once the new device is set up and it backs up for the first time, you
have to be sure it will be seen by any computer or iDevice using it.
This is where you'd find out if it was set up correctly. It should work.
You may have seen the setup info here, so that's one way to see
if it can work, then check any other options; or change settings.
Given the new unit also features faster connection speeds and options
plus also is a closer match to recent OS X system updates, it would
be a natural to connect it as primary internet point, too. As described:
•Setting up TC for the first time: http://support.apple.com/kb/HT1178
•AirPort Time Capsule - Support database:
http://www.apple.com/support/airport/timecapsule/
Sorry about the lack of info on how-to, I tend to do backups manually
and hope to do full backup (boot capable) clones as time permits...!
Good luck!
Posted on May 25, 2014 12:41 PM