The forums are full of users with computers that no longer work correctly after running these so call 'cleaners' (Memory Clean, CleanMyMac, and MacKeeper). Do not install any third party so called Mac cleaning utilities. They can do harm to your Mac.

Download EtreCheck and paste results here for help troubleshooting. This will allow us to see what might be installed that is causing the problem.

http://www.etresoft.com/etrecheck

If you post the results from Etrecheck it will give us lots of info that will help diasnosis your problem.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.

Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.

2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.

There are ways to back up a computer that isn't fully functional. Ask if you need guidance.

3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.

Here's a summary of what you need to do, if you choose to proceed:

☞ Copy a line of text in this window to the Clipboard.

☞ Paste into the window of another application.

☞ Wait for the test to run. It usually takes a few minutes.

☞ Paste the results, which will have been copied automatically, back into a reply on this page.

The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.

5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.

6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.

Triple-click anywhere in the line of text below on this page to select it:

PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-

Copy the selected text to the Clipboard by pressing the key combination command-C.

7. Launch the built-in Terminal application in any of the following ways:

☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)

☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.

Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.

8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter

exec bash

and press return. Then paste the script again.

9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.

If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.

10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line

[Process completed]

to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.

11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.

At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.

If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.

12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.

Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.

________________________________

Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I would start by removing trusteer. It's mostly useless. More info: Re: User quits unexpectedly

http://www.trusteer.com/uninstalling-rapport-mac-os

Main Internet Plugins: You have more than one version of Flash installed. Remove all then reinstall. You might try running without flash first. If you don't have flash most items will revert to HTML5. Install YouTube5 Safari extension by Connor McKay. With this extension installed, embedded YouTube videos are modified to use the HTML5 video tag rather than Flash Player for playback. This is possible because behind the scenes, all YouTube videos are encoded using H.264.

http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html

http://get.adobe.com/flashplayer/?no_redirect

Verify Java is fully updated http://www.java.com/en/download/installed.jsp

User Internet Plug-ins:

  npBcsMcTcIO: Version: (null)

Not sure what this is. Make sure it's fully updated.

Kernel Extensions: You have 16 drivers not loaded. Do you need this apps? I would remove if possible.

Same problem, here, updated, pw n longer works, tat means a million things, can’t install anything, any ideas?

HERE IS MY ENTRSFO, HOPE IT HELPS:

EtreCheck version: 1.9.12 (48)

Report generated July 18, 2014 at 11:49:39 AM PDT

Hardware Information:

  27" iMac (Early 2011)

  iMac - model: iMac12,2

  1 2.7 GHz Intel Core i5 CPU: 4 cores

  16 GB RAM

Video Information:

  AMD Radeon HD 6770M - VRAM: 512 MB

  iMac 1920 x 1080

System Software:

  OS X 10.9.4 (13E28) - Uptime: 1 day 11:8:27

Disk Information:

  ST31000528AS disk2 : (1 TB)

  EFI (disk2s1) <not mounted>: 209.7 MB

  Macintosh HD (disk2s2) / [Startup]: 999.35 GB (59.06 GB free)

  Recovery HD (disk2s3) <not mounted>: 650 MB

  OPTIARC DVD RW AD-5690H 

  HGST HUS724020ALE640 disk0 : (2 TB)

  EFI (disk0s1) <not mounted>: 209.7 MB

  disk0s2 (disk0s2) <not mounted>: 2 TB

  Boot OS X (disk0s3) <not mounted>: 134.2 MB

  HGST HUS724020ALE640 disk1 : (2 TB)

  EFI (disk1s1) <not mounted>: 209.7 MB

  disk1s2 (disk1s2) <not mounted>: 2 TB

  Boot OS X (disk1s3) <not mounted>: 134.2 MB

USB Information:

  Apple Inc. FaceTime HD Camera (Built-in)

  Apple Inc. BRCM2046 Hub

  Apple Inc. Bluetooth USB Host Controller

  Apple Computer, Inc. IR Receiver

  Apple Internal Memory Card Reader

FireWire Information:

  LaCie d2 quadra (button) 400mbit - 800mbit max

  EFI (disk4s1) <not mounted>: 209.7 MB

  Snow Leopard Copy (disk4s2) /Volumes/Snow Leopard Copy: 666.67 GB (18.36 GB free)

  Desktop Download(s) from iMac (disk4s3) /Volumes/Desktop Download(s) from iMac: 666.67 GB (60.95 GB free)

  OS Lion (disk4s4) /Volumes/OS Lion: 332.71 GB (3.91 GB free)

  Recovery HD (disk4s5) <not mounted>: 650 MB

  MBP COPY (disk4s6) /Volumes/MBP COPY: 333.09 GB (164.16 GB free)

  Avid Mbox Pro 400mbit - 400mbit max

Thunderbolt Information:

  Apple Inc. thunderbolt_bus

  G-Technology G-RAID with Thunderbolt

Configuration files:

  /etc/hosts - Count: 18

Gatekeeper:

  Mac App Store and identified developers

Kernel Extensions:

  [loaded] at.obdev.nke.LittleSnitch (4050 - SDK 10.8) Support

  [loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support

  [loaded] com.HGST.driver.GDOCKDriver (1.0.3 - SDK 10.7) Support

  [loaded] com.avid.driver.firewire.mboxpro (1.3.0 - SDK 10.7) Support

  [loaded] com.digidesign.iokit.DigiDal (10.0f56 - SDK 10.6) Support

  [not loaded] com.line6.driver.xtaudio (7.3.6 - SDK 10.7) Support

  [not loaded] com.line6.iokit.ClassicNotSeizeVariaxIF (1.0.1) Support

  [not loaded] com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) Support

  [not loaded] com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) Support

  [not loaded] com.paceap.kext.pacesupport.panther (5.9 - SDK 10.3) Support

  [loaded] com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) Support

  [not loaded] com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) Support

  [not loaded] com.roxio.TDIXController (1.7) Support

  [not loaded] com.wacom.kext.pentablet (5.3.3 - SDK 10.8) Support

  [loaded] com.waves.driver.soundgrid (2.0.0) Support

Startup Items:

  DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader

Problem System Launch Daemons:

  [failed] com.apple.wdhelper.plist

Launch Daemons:

  [running] at.obdev.littlesnitchd.plist Support

  [loaded] com.adobe.fpsaud.plist Support

  [loaded] com.adobe.SwitchBoard.plist Support

  [loaded] com.google.keystone.daemon.plist Support

  [running] com.line6.l6ksettingmgr.plist Support

  [loaded] com.oracle.java.Helper-Tool.plist Support

  [loaded] com.oracle.java.JavaUpdateHelper.plist Support

  [running] com.paceap.eden.licensed.plist Support

  [loaded] com.timesoftware.timemachineeditor.helper.plist Support

  [running] com.waves.daemon.SoundGridProtocolService.plist Support

  [loaded] PACESupport.plist Support

Launch Agents:

  [running] at.obdev.LittleSnitchUIAgent.plist Support

  [not loaded] com.adobe.AAM.Updater-1.0.plist Support

  [running] com.avid.mboxpro.helper.plist Support

  [running] com.canon.MFManager.plist Support

  [loaded] com.divx.dms.agent.plist Support

  [loaded] com.divx.update.agent.plist Support

  [loaded] com.google.keystone.agent.plist Support

  [loaded] com.oracle.java.Java-Updater.plist Support

  [running] com.wacom.pentablet.plist Support

User Launch Agents:

  [loaded] com.adobe.AAM.Updater-1.0.plist Support

  [not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support

  [failed] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support

  [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support

  [failed] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support

User Login Items:

  iTunesHelper

  SpeechSynthesisServer

  uTorrent

  G-Technology Assistant

Internet Plug-ins:

  AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support

  Flash Player: Version: 14.0.0.145 - SDK 10.6 Cannot contact Adobe

  EPPEX Plugin: Version: 10.0 Support

  iLokClientHelper: Version: 3.6 - SDK 10.5 Support

  DivX Web Player: Version: 3.1.0.13 - SDK 10.5 Support

  AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support

  googletalkbrowserplugin: Version: 5.4.2.18903 Support

  RL Secure Plug-In Layer: Version: (null) - SDK 10.5 Support

  MagellanPlugIn: Version: 1.2 - SDK 10.6 Support

  QuickTime Plugin: Version: 7.7.3

  FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support

  AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support

  GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support

  Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support

  OVSHelper: Version: 1.1 Support

  Default Browser: Version: 537 - SDK 10.9

  Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 Support

  o1dbrowserplugin: Version: 5.4.2.18903 Support

  WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support

  JavaAppletPlugin: Version: Java 7 Update 60 Check version

  WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support

Safari Extensions:

  Conduit Search for Safari: Version: 1.0

  Searchme: Version: 1.3

Audio Plug-ins:

  BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9

  AirPlay: Version: 2.0 - SDK 10.9

  AppleAVBAudio: Version: 203.2 - SDK 10.9

  iSightAudio: Version: 7.7.3 - SDK 10.9

iTunes Plug-ins:

  Quartz Composer Visualizer: Version: 1.4 - SDK 10.9

User Internet Plug-ins:

  ConduitNPAPIPlugin: Version: 1.0 - SDK 10.6 Support

  UploadManager: Version: (null) - SDK 10.5 Support

  Google Earth Web Plug-in: Version: 7.1 Support

  ContentManager: Version: (null) - SDK 10.5 Support

  RocketEngine: Version: (null) - SDK 10.5 Support

3rd Party Preference Panes:

  Flash Player  Support

  Flip4Mac WMV  Support

  Java  Support

  Line6AudioMIDI  Support

  Mbox Pro  Support

  YAMAHA-USBMIDIPatch  Support

Time Machine:

  Skip System Files: NO

  Mobile backups: OFF

  Auto backup: NO - Auto backup turned off

  Volumes being backed up:

  Macintosh HD: Disk size: 930.71 GB Disk used: 875.71 GB

  Destinations:

  TIME MACHINE [Local] (Last used)

  Total size: 1 

  Total number of backups: 3

  Oldest backup: 2013-10-21 19:02:42 +0000

  Last backup: 2014-03-19 11:19:09 +0000

  Size of backup disk: Too small

  Backup size 1  < (Disk used 875.71 GB X 3)

  Time Machine details may not be accurate.

  All volumes being backed up may not be listed.

Top Processes by CPU:

      2% SGProtocolService

      1% DashboardClient

      1% WindowServer

      1% fontd

      0% Safari

Top Processes by Memory:

  999 MB com.apple.SpeechRecognitionCore.speechrecognitiond

  459 MB DaisyDisk

  360 MB mds_stores

  180 MB Safari

  164 MB Mail

Virtual Memory Information:

  8.79 GB Free RAM

  4.12 GB Active RAM

  1.46 GB Inactive RAM

  1.62 GB Wired RAM

  1.76 GB Page-ins

  9 MB Page-outs

Please start your own discussion. Trying to help 2 or more people in the same discussion can get confusing for everyone. You can link to this one to save typing.

I've got a problem with Apple Mail since upgrading to 10.9.4.

We use Exchange at work, but none of the messages I send from my MacBook are showing up in any of any sent mail folders - either local or on the server.

The recipient still receives my messages, *and* messages sent from my iPhone still show up in the sent mail folder on the server.

But messages sent using Apple Mail under 10.9.4 disappear.

I had a similar problem under 10.9.2; messages wouldn't show up in my sent folder until after a long delay.  I could usually solve the problem by quitting and restarting Mail.  The problem mostly disappeared under 10.9.3.  But now it's much worse - the quit/restart Mail trick is no longer fixing things, and the sent messages aren't even on the server (although recipients still received them). 

This is a huge problem for me - I live and die by e-mail and can't do much without a record of the last two days worth of sent messages (i.e., the two days since I upgraded).  I'll start BCCing my Google Mail account now, but still need those last two days of sent mail back.

Would love some help!!!

Please start your own discussion. Trying to help 2 or more people in the same discussion can get confusing for everyone. You can link to this one to save typing. Your problem is totally unrelated to the OP's problem.

Sure. I will start a new thread.  But if I may, perhaps the reason people are posting problems "totally unrelated to the OP's problem" is because

(1) the title of the thread is simply "Issues after Software OS X 10.9.4 upgrade"

and

(2) googling for "apple mail exchange sent mail missing 10.9.4" brings up this thread and nothing else that looks relevant.

Apologies from this newbie for thinking that issues arising after the 10.9.4 upgrade would be pertinent to a thread entitled "issues after the 10.9.4. upgrade."

Anytime you start adding a new poster to a discussion, it starts getting confusing. Keeping details of each user's problem and what has been tried and suggested get muddled. This is especially true when it's a topic that is so general just about anything could be related.

We are all volunteers here and do our best to help users with their problems. Starting your own post is the best way to get help.

OS X 10.9.4 (13E28) Safari update crash/Freeze MacBook Pro 15 early 2008. I have to power-cycle it to recover for short time and then randomly it crashes again. I also tried to repair permissions where it found ACL (forgot path) where it should have. Also Safari executable bits were missing. After repair still same issue. I held shift during boot and after login to put in safe mode; but still saw issues with Safari VERY VERY SLOW to point that I could see screen refresh section per/section on page it was loading.

My solution (cause I need my computer to do work)I used time-machine to go back to 10.9.3 and now no issues.

WHAT GIVES instead of getting better APPLE releases are getting worse!!

I want to know if anyone else has same type of computer (MacBook Pro 15 early 2008) and if they are getting same issue with this latest release?

Linc Davis gives great advise on troubleshooting but it's not a solution for me (as he says what he suggests doesn't fix issue but help troubleshoot) Tried didn't get anywhere need quick fix therefore my solution

.