malvesjj

Q: Imac shuts off

Good afternoon, I have a big problem on my Imac, whenever I'm working in Illustrator or Photoshop CS6, it shuts off, I wonder if it would have any way of solving this problem.

The same has been authorized for twice and they did not detect any problems. Working with Fashion and read files with heavy prints. Like some kind of help.

I await contact.

iMac, OS X Mavericks (10.9.4)

Posted on Sep 18, 2014 1:17 PM

Close

Q: Imac shuts off

  • All replies
  • Helpful answers

  • by Kappy,Helpful

    Kappy Kappy Sep 18, 2014 1:18 PM in response to malvesjj
    Level 10 (270,841 points)
    Desktops
    Sep 18, 2014 1:18 PM in response to malvesjj

    I suggest you try the following:

     

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive

     

    Boot to the Recovery HD:

     

    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.

     

    Repair

     

    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.

     

    Reinstall Lion, Mountain Lion, or Mavericks

     

    OS X Mavericks- Reinstall OS X

    OS X Mountain Lion- Reinstall OS X

    OS X Lion- Reinstall Mac OS X

     

         Note: You will need an active Internet connection. I suggest using Ethernet

                     if possible because it is three times faster than wireless.

  • by Linc Davis,

    Linc Davis Linc Davis Sep 18, 2014 5:43 PM in response to malvesjj
    Level 10 (207,963 points)
    Applications
    Sep 18, 2014 5:43 PM in response to malvesjj

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.

    Launch the Console application in any of the following ways:

    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)

    ☞ In the Finder, select Go Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.

    Step 1

    For this step, the title of the Console window should be All Messages. If it isn't, select

              SYSTEM LOG QUERIES All Messages

    from the log list on the left. If you don't see that list, select

              View Show Log List

    from the menu bar at the top of the screen.

    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)

    Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.

    For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.

    If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.

    When posting a log extract, be selective. A few dozen lines are almost always more than enough.

    Some private information, such as your name, may appear in the log. Anonymize before posting.

    Please don't indiscriminately dump thousands of lines from the log into this discussion.

    Please don't post screenshots of log messages—post the text.

    Step 2

    In the Console window, select

              DIAGNOSTIC AND USAGE INFORMATION System Diagnostic Reports

    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select

              View Show Log List

    from the menu bar.

    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.

    I know the report is long, maybe several hundred lines. Please post all of it anyway.

    If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.

    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)

    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • by malvesjj,

    malvesjj malvesjj Sep 19, 2014 3:48 AM in response to Kappy
    Level 1 (0 points)
    Sep 19, 2014 3:48 AM in response to Kappy

    Thank you, I'll do it, and I bring more news.