Xtabi

Q: my iphone 5s fingerprint lock is not working

Help my fingerprint lock is not working

Posted on Sep 28, 2013 8:22 AM

Close

Q: my iphone 5s fingerprint lock is not working

  • All replies
  • Helpful answers

first Previous Page 4 of 4
  • by ckuan,

    ckuan ckuan Feb 17, 2014 3:55 AM in response to Camraom
    Level 7 (34,301 points)
    Feb 17, 2014 3:55 AM in response to Camraom

    Did you registered the fingers using different angles as given in the support article?

    Did you clean the Home button?

    Do you have oily fingers?

     

    If problem persisted, make an appointment with the Apple genius bar.

  • by jcrenard,

    jcrenard jcrenard Feb 28, 2014 12:29 PM in response to Camraom
    Level 1 (0 points)
    Feb 28, 2014 12:29 PM in response to Camraom

    I was having same problems, fingerprint would work for a couple days then gradually stop.  I even had all 5 saved fingerprints the same thumb, same problems.  Finally discovered a fix that worked.

     

    The problem was how I was scanning my fingerprints in.  I was keeping my thumb mostly centered and moving just slight variations as iphone recognized the fingerprint pattern.  Instead, I wiped clean all 5 fingerprints and started over, but this time I moved my thumb around alot, sometimes getting just half the thumbprint, sometimes the edges of thumb.  Did all 5 saved fingerprints this way using same thumb.

     

    It's been 2 months now and recognition works first time every time!

  • by Strangecaroline75,

    Strangecaroline75 Strangecaroline75 Mar 8, 2014 7:45 AM in response to Xtabi
    Level 1 (0 points)
    Mar 8, 2014 7:45 AM in response to Xtabi

    I have the same problem. However, both my husband and dad have stored their prints on my phone and after a month have no problems!! They think it might be the amount of electricity (for lack of the correct term) in my thumb vs theirs. Anyone heard of that???

  • by Ben Clifton,

    Ben Clifton Ben Clifton Apr 12, 2014 8:22 AM in response to Xtabi
    Level 1 (0 points)
    Apr 12, 2014 8:22 AM in response to Xtabi

    After 48 hours or after restarting your iPhone, you must type your password. Also, with the iPhones fingerprint scanner, taking a shower, using lotion, exercising, and/or doing other activities involving your hands may cause your fingerprint to seem to change, causing the iPhone to think the fingerprint is incorrect. For more info, read http://support.apple.com/kb/HT5883

     

    Hope this helps.

  • by HamidoOoOo,

    HamidoOoOo HamidoOoOo May 5, 2014 12:02 AM in response to BenGe89
    Level 1 (0 points)
    May 5, 2014 12:02 AM in response to BenGe89

    me too what shuld i do???

  • by Jim Bracke,

    Jim Bracke Jim Bracke May 19, 2014 12:54 PM in response to Xtabi
    Level 1 (0 points)
    May 19, 2014 12:54 PM in response to Xtabi

    Ditto, plus now I can't even enter a new fingerprint. It immediately says operation failed....

  • by JonnyBoiii,

    JonnyBoiii JonnyBoiii Jun 3, 2014 1:23 AM in response to Xtabi
    Level 1 (0 points)
    Jun 3, 2014 1:23 AM in response to Xtabi

    So I too was having this problem before and after the iOS update.  Sometimes when your fingers are clean it won't work. I know it sound weird but you need the natural oils secreted by your skin on your finger. So even after you wash and dry your hands and try to open your phone it might not open due to the lack of oils. I actually found this out when putting my fingerprints in the setup. It recognized my left hand but not my right. So I studied my ridges and realized my left thumb looked oily and "darker" and more detailed and my right thumb did not. So I rubbed my thumb on my forehead to collect some oils and bam it worked.

     

    Think of it like crime scene. In order to lift a finger print you need to dust it. It order to dust for a print there needs to be the natural oils that is secreted by your body so the powder can stick to it! Oh my I feel like such a genius! Hope this helps!!

  • by SandeepSubisiso,

    SandeepSubisiso SandeepSubisiso Sep 4, 2014 6:26 AM in response to Xtabi
    Level 1 (0 points)
    Sep 4, 2014 6:26 AM in response to Xtabi

    i have same problem.

    and apple care does not support just they given the mail to me for same (Touch Id FingerPrint Problem)

     

    This is to inform you that your iPhone5s is found liquid triggred and your case has been declined from Apple.( Case id is : 65722213 )

     

     

    This is  to inform you that your iPhone5s will go for paid replacement and exchange price  will be : 21500/-.

  • by Kaleani,

    Kaleani Kaleani Nov 16, 2014 10:41 AM in response to gozrula
    Level 1 (0 points)
    Nov 16, 2014 10:41 AM in response to gozrula

    SAme problem with my iPhone5s.  I have done all the troublshooting suggested by the Apple link but after 2 or less days it stops recognizing my print.  I think I have reached the point of not using the feature at all, it is just too frustrating. 

  • by Kaleani,

    Kaleani Kaleani Nov 16, 2014 10:49 AM in response to ckuan
    Level 1 (0 points)
    Nov 16, 2014 10:49 AM in response to ckuan

    CLeaning the button works only for a short time Too.  i've been doing it almost every time I open the phone.  also, considering that this feature is to save time when unlocking the phone, to clean the button or repeatedly and unsuccessfully trying to do just that does quite the opposite.  I am close to being done with it.

  • by Jascd,

    Jascd Jascd Mar 29, 2015 2:25 PM in response to Kaleani
    Level 1 (0 points)
    Mar 29, 2015 2:25 PM in response to Kaleani

    Mine never worked well, I have reset, hard reset, retored and nothing worked. In frustration I bought a replacement button off ebay and fitted it only to find that the sensor itself is keyed to the CPU so replacing the sensor will not work unless Apple itself does it. In the end I just refitted my original apple home button and guess what, now it works fine. No idea why it should but it does. I found a youtube guide to replacing the button. Also, when i had the button out and the ebay one in I powered the phone on to check function and then powered it off to replace the original. Not sure if that any any effect but I suggest you simply power the phone off remove the button, then power it on, then off again then replace the button. Taking it apart may void the apple warranty but if its already expired that wont be an issue. Good luck

  • by macmajid,

    macmajid macmajid May 18, 2015 8:26 PM in response to Xtabi
    Level 1 (4 points)
    May 18, 2015 8:26 PM in response to Xtabi

    same problem with my phone 5s and

    the person who checked my iphone  in apple store said that my iphone is tired and you have to turn it off every 24H for about 30 min !!!!

    now the phone is sleeping and i will wake it up in 10 min

                        HAPPY WITH FUNNY COSTUMER SERVICE ...

  • by mlevent,

    mlevent mlevent Feb 21, 2016 5:59 AM in response to annab9211
    Level 1 (0 points)
    Feb 21, 2016 5:59 AM in response to annab9211

    • Dear All

     

    i had some problem with my touch ID and it was locked, completely out of work and no response.

     

    Possible reasons

    * New IOS update and too many load on chip.

    * Fake cable - loose cable - teared/weared cable or fake charger use. can strongly cause problem.

    * And many different physical & mechanical & electronical effects.

     

    Solution

     

    * Get new cable ( or to try borrow from friend ) and use it with original charger to charge you phone.

     

    Steps to do this,

     

    1. Put your phone Battery Safe Mode

    2. use it in battery safe mode always ( even it is full charged )

    3. During this time always charge your phone with original cable & and charger

    4. Optional : you can shut down your Phone and full charge it for some time.

    5. it is starting to work again. this worked for me after 1-2 months brake.

    6. In 2 or 3 days it will work for you also.

    7. After that do not use 3rd party chargers. and do not turn off the battery safe mode for 5s & may for 6.

     

    I will update the situation again.

     

    issue fixed with this on  19th of Feb and today is 21st of Feb 2016, still there is no issue.

     

    Updated on 21st of Feb 2016

first Previous Page 4 of 4