Edgar

Q: New Logic Pro X 10.1 released

The new version should popup in the App Store any moment. Here are a few early reports:

 

http://www.macworld.com/article/2872667/first-look-logic-pro-x-10-1-brings-it-to -beatmakers.html

 

http://createdigitalmusic.com/2015/01/whats-new-logic-pro-x-10-1-editing-power-e lectronic-drums-detail/

 

Hope that helps

 

Edgar Rothermich

http://DingDingMusic.com/Manuals/

'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Logic Pro X, OS X Yosemite (10.10.1), DingDingMusic.com/Manuals/

Posted on Jan 21, 2015 2:27 PM

Close

Q: New Logic Pro X 10.1 released

  • All replies
  • Helpful answers

Page 1 of 8 last Next
  • by Len Gold,

    Len Gold Len Gold Jan 21, 2015 3:13 PM in response to Edgar
    Level 1 (15 points)
    Jan 21, 2015 3:13 PM in response to Edgar

    Has the update been pulled? I am not seeing it in the update section of the App Store. But when I look at the Purchases section Logic Pro has an update button next to it.

     

    When I click on that button nothing happens.

     

    Anybody else seeing this?

  • by benjigordon,

    benjigordon benjigordon Jan 21, 2015 3:36 PM in response to Edgar
    Level 1 (5 points)
    Audio
    Jan 21, 2015 3:36 PM in response to Edgar

    Anyone know where note repeat is with the new 10.1?

  • by The Art Of Sound,

    The Art Of Sound The Art Of Sound Jan 21, 2015 3:54 PM in response to Edgar
    Level 6 (12,107 points)
    Jan 21, 2015 3:54 PM in response to Edgar

    Logic Pro X 10.1 update

     

    New Features

    • 10 new Drummers that produce beats in a variety of electronic and hip hop styles including Techno, House, Trap, Dubstep and more
    • Drummer provides specialized sound and performance controls for dialing in electronic or hip hop drum grooves
    • New Drum Machine Designer plug-in for customizing electronic drum kits
    • Redesigned Compressor plug-in features scalable, Retina-ready interface and 7 models including the new Classic VCA
    • Retro Synth can now create wavetables from imported audio and is able to stack up to 8 voices
    • Note Repeat and Spot Erase modes allow classic drum machine style techniques for creating beats in realtime
    • Automation can now be part of a region, not just the track
    • Relative and Trim Automation modes extend the options for fine-tuning existing automation
    • Manage large-scale mixes more easily with the addition of console-style VCA faders in the mixer
    • Mixer now allows remote control of microphone and other input settings for compatible audio interfaces
    • Realtime rendering of fades allow them to work with Flex Pitch and speeds up project load times
    • The Plug-in Manager now allows you to customize the organization of your menu
    • Support for Mail Drop and AirDrop in OS X Yosemite makes it even easier to share your Logic projects
    • Expanded sound library includes over 200 new synth patches and 10 Mellotron instruments
    • The Piano Roll editor now features a Brush tool for creating or deleting a sequence of notes with single mouse gestures
    • Smart Quantize proportionally corrects the timing and length of notes to preserve the musicality of your original performance
    • Track Stacks can now be disclosed/undisclosed directly in the Mixer independently of the Tracks area
    • New Collapse view option in the Piano Roll Editor lets you see more notes in less vertical space
    • It's now possible to create more than one Drummer track per song
    • It's now possible to copy and paste voices between different instances of Ultrabeat
    • There's a new option in the Drummer Editor action menu that allows you to change the drummer without also changing the drum kit
    • Alternatives can now be exported as fully independent projects
    • There's now a button in the Main window to automatically set the vertical zoom to the optimal resolution to maximize track height while keeping all tracks visible
    • A new Region parameter allows the playback speed of Apple Loops to be altered from â…› to 8x the original speed
    • Command-clicking an enabled mute or solo button un-mutes or un-solos all channels if no track is muted or soloed, and command-clicking a mute or solo button mutes or solos all tracks
    • There's now a Kill/Recall Solo button in the track header area that toggles the solo state of all currently soloed tracks
    • The Reset Channel Strip command now works for multiple selected channel strips in the Mixer
    • Logic now supports the Bravura score font
    • There's a new key command for enabling/disabling the Flex or Follow Tempo Region parameter
    • Logic can now import multichannel interleaved audio files and convert them to individual mono files
    • When bouncing a project, the default name for the bounced file is now the project name
    • The Piano Roll now includes an option to display drum names instead of note names when working with Drummer tracks, EXS drum kits or Ultrabeat tracks
    • Time Handles in the Piano Roll allow time stretching/compression on selected notes
    • It's now possible to adjust the position and borders of regions in the Piano Roll time line
    • Undo is now available in the Notepad
    • Undo is now available for Score Set edits
    • A single click now inserts an EQ into the EQ slot of a channel strip
    • Logic now supports 50, 5994d, 5994, 60 d and 60 fps frame rates
    • There's now a Track Protect button for the Movie track
    • The Repeat Regions/Events key command now duplicates the currently selected region or event without opening a dialog window (the previous behavior for this command is accessed with the new key command Repeat Regions/Events Multiple Times)
    • Smart Controls mapped to plug-in parameters are now dimmed when the plug-in is bypassed
    • User created Groove Templates are now available from the Time Quantize menu in the Piano Roll
    • When dragging objects, the Tooltip now shows both the bar/beat and time position
    • The Beat Mapping track now offers a Protect Flex Markers option in the Beat Mapping drop-down menu
    • The Copy command now copies selected markers in the Marker List window as text
    • When multiple closed Track Stack regions are glued together, Logic now maintains the individual tracks within the stack
    • The Convert to New Sampler Track sheet includes a new option for creating ‘1 Shot’ Zones
    • Auto backups of Logic projects are now directly accessible from the Quick Looks view
    • It's now possible to specify up to 100 automatic backups per alternative in a project
    • Dragging a movie in the Movie Track now moves in increments of one frame and the Option key can be used to position it in smaller increments
    • When Logic extracts audio from a movie file, it now creates a time-stamped Broadcast Wave file
    • When a movie is added that is longer than the current project, the project is now automatically lengthened to accommodate it
    • A region with movie audio sync can now be defined for a movie file
    • When exporting audio to a movie, Logic now uses the project sample rate
    • When exporting audio to a movie, the length of the selected regions now determines the overall length of the newly created movie
    • The contents of the Bounces folder is now excluded when Cleanup Project is used on a folder project
    • The Clean Up Project dialog now shows the dates previous operations were performed

    Stability

    • Logic Pro X 10.1 includes improvements to stability including, but not limited to fixes for:
    • Quitting unexpectedly when analyzing 192 kHz audio files for flex editing
    • Quitting unexpectedly when the Mix > Create Automation > Fade-Out command is used
    • Quitting unexpectedly when adjusting the start time of a region by samples in the Event List
    • Quitting unexpectedly when editing MIDI events in a song created in Mobile GarageBand
    • Quitting unexpectedly when importing a MIDI file that contains no note events
    • Quitting unexpectedly when adding a Text object to the Environment
    • Quitting unexpectedly after performing multiple velocity edits in the EXS24 Instrument Editor

    Performance

    • Transient detection for Beat mapping is performed faster in cases where the audio file has been divided into multiple smaller regions
    • Responsiveness when rubber-band selecting a large number of regions is improved
    • Improves the performance of the realtime waveform while recording audio
    • The movie now responds more accurately when scrubbing by frames with the Playhead
    • Logic no longer shows a spinning wait cursor for several seconds when recording is started on certain computers
    • Logic now uses less CPU when idle on Macs running on battery power

    Main Window

    • When an Apple Loop is added to a new track, the channel strip volume is now set to match the pre-listen volume in the Loop Browser
    • There is now an option that allows the looped portion of looped regions to have a darker shade than the parent region
    • The cycle locators in the LCD now reliably show the cycle state in projects originally created by earlier versions of Logic
    • The "Slice at Transient Markers" command now works on regions up to 256 bars in length
    • Tracks set to follow a Drummer track that is enabled as the Groove track now update as expected when changing the Swing parameter in the Drummer editor
    • Dragging the Zoom tool over the lower half of a track no longer sets the visible area to include the track below
    • Global edit operations, such as the “Insert Silence between Locators” command, now are applied to hidden tracks
    • Long regions with fades applied now resume playback as expected when overlapped by a shorter region
    • Logic now automatically applies crossfades when cycling to reduce clicks in audio regions at cycle start and end points
    • The Patch Library can now be used to browse and assign patches to the right-hand channel strip in the Tracks area Inspector when it's selected
    • Replace mode recording onto a Take Lane of a group track that is clutched no longer removes that track from the group (this allows group comping to work as expected once the group is reactivated)
    • Dragging the right edge of a region to the right in songs that start before 1111 no longer results in unexpected jumps in the region border
    • The Zoom to Fit Selection command now includes the looped portions of looped regions
    • Logic no longer fails to record when the SMPTE start time is 00:00:00:0000 and there is a Record pre-roll
    • Creating a MIDI track with a device configured in Audio MIDI Setup now behaves as expected
    • Option-clicking on Inspector parameters such as Transpose or Velocity again resets them to default values
    • Changes made to fade values in the Region Inspector by scrolling are now updated immediately during scrolling
    • Performing Undo after creating a Track Stack no longer removes plug-in settings from the tracks used in the Track Stack
    • When a Take Folder is disclosed, other non-disclosed Take Folders no longer show empty outlines in the Take Lanes
    • Logic again presents a dialog asking if a time signature change should be added after using the Cut Section between Locators command for a section whose borders do not both fall on the start of a bar
    • Bounce Track in Place now includes all regions on a MIDI track that contains MIDI takes
    • Using the Split by Playhead command no longer causes a looped region earlier in the same track to unexpectedly extend to the beginning of the split region
    • Deleting a Track Stack summing Aux no longer deletes tracks that had originally been part of the stack, but were subsequently moved out of it
    • Adjusting the anchor position on an audio region no longer causes the length to change slightly
    • Enabling automation view no longer causes an auto-zoomed track’s vertical zoom to increase
    • Clicking Learn to learn controller assignments in the Toolbar no longer causes all buttons in the Toolbar to dim
    • The overview on a closed Track Stack is now shown correctly in projects whose start time isn't 1 1 1 1
    • Reorganizing the order of tracks within a Summing Track Stack no longer causes some the tracks to route to the wrong bus or output
    • When recording MIDI, Logic now captures notes played up to 1 bar before the first downbeat
    • Logic no longer shows a File Not Found error when renaming an audio file that's stored outside the project folder in the Project Audio window
    • When the locators are set to start at 1 1 1 1, the Insert Silence at Locators command no longer adds an unneeded 4/4 time signature and changes the LCD display to -9 1 1 1
    • The "Split by Playhead" command no longer moves SMPTE locked regions when performed at high zoom levels
    • Maximizing a floating Transport no longer causes it to stretch to the full width of the screen
    • Creating a new Software Instrument track no longer causes Logic’s global tuning to reset to A440 if it's been changed
    • Catch Playhead Position is again properly disabled when a Marquee selection is made
    • Command-clicking the lower half of the timeline again toggles Auto Punch
    • It's again possible to delete the right portion of a region divided by using Marquee selection
    • Logic’s real time waveforms are now accurately positioned when audio recording is started after playback has begun
    • Logic now reliably uses the selected instrument when using the Drum Replacement feature
    • Audio added to the Project Audio window is now reliably shown in its correct position, as determined by the sort method selected in the window
    • Record enabling a track no longer opens the Bounce window if an Output track is selected
    • Regions created by performing Strip Silence now retain any Region Gain setting applied to the original region
    • The "Project Cleanup" command now preserves assets used by other projects in the same project folder
    • Smart Snap now works correctly with /8 based signatures and at high zoom levels
    • Settings for the Metronome are now saved as expected in Templates
    • Join Regions per Tracks again works properly when some of the regions in the selection do not require merging
    • Selection of regions via Shift-click and Command-click now works reliably in projects that contain track stacks
    • Custom graphs and ranges set up for Smart Controls are now retained when the Smart Control is copied
    • When an Alternative is created after a project has been edited, Logic now shows a dialog offering to save the current Alternative
    • When Catch mode is enabled in the Marker List, double-clicking a marker now properly opens that marker instead of the one currently under the Playhead
    • Changing a project’s frame rate no longer causes SMPTE-locked regions to change positions
    • When a project is saved with a movie open in full screen mode on a second display, the movie now displays in full screen mode when the project is opened
    • Prelisten of audio files in the All Files browser now continues when using the arrow keys to navigate between files
    • Clicking on the Piano Roll tab in the Main window now properly sets the focus to the Piano Roll editor
    • A single audio track packed into a folder and then moved to to a different audio track, now plays on the new audio track as expected
    • Logic Control control surfaces are more reliably detected at launch
    • Logic now reliably retains audio recordings that are part of a project but not currently used in a take when the project is saved for the first time
    • The "Join with Select Regions" recording option now works as expected when dropping into recording while playing

    Editors

    • The Option key can now be used with the Scissors tool to divide a long note into a set of equal length shorter notes
    • The Event list now immediately updates to show notes copied into the Score or Piano Roll editors
    • Edits to notes performed in the Event List are now immediately reflected in the Piano Roll
    • Deleting an event definition in the Step Editor now selects the next event definition
    • It's now possible to select a group of events in the Step Editor by Shift-dragging over them with the pointer
    • The Finger tool can now be used to move events in the Step Editor
    • When a region is moved in the Tracks area, its position in the Step Editor bar ruler is now immediately updated
    • The MIDI In and MIDI Out buttons in the Event List and Piano Roll now synchronize between the two editors as expected
    • The timeline in the Step Editor now updates immediately when the Division format is changed in the LCD
    • Right-clicking in the MIDI Draw area of the Piano Roll no longer causes selected regions to be de-selected
    • MIDI Draw in the Piano Roll now reliably shows labels for all MIDI controller types
    • The Paste command is again available in the Piano Roll contextual menu
    • When multiple regions are selected, double-clicking a note in the Piano Roll again restricts the view to only the region containing the note, and a double-click on the Piano Roll background restores the previous view
    • When Step Input is active for an editor, key presses on the computer keyboard no longer lead to unexpected note entry when the Musical Typing Keyboard isn't open
    • Pressing Control-Shift while dragging notes in the Piano Roll now allows movement in increments of single ticks
    • Simultaneously editing values on multiple selected Staff Styles now reliably maintains the relative values
    • Edits are now performed at the correct Playhead position when the "Split by Playhead" command is used in the Piano Roll on a region whose left border has been changed
    • The position of cuts for regions divided with the Scissors tool at high zoom levels is now consistently accurate
    • Undo now works as expected after editing time and key signatures
    • A Piano Roll with Link mode turned off no longer loses focus when a region at a different position is selected
    • Sharp notes now properly retain their pitch when pressing Enter to confirm an edit in the Event List
    • Notes on the Piano Roll now continue to display if the Global Track header or an item in a Global Track is selected
    • Pasting events whose type is filtered in the Event List now works correctly
    • Double-clicking a note in the Event List editor no longer causes the pitch to change

    Automation

    • Changing the automation mode for a group of Aux channels selected in the Track Mixer now works reliably when some of them are assigned to tracks in the Tracks Area
    • Changes made simultaneously to the automation display of multiple tracks are now immediately visible in the Tracks area
    • A tooltip showing position information is again shown when moving an automation or a MIDI Draw point in the Tracks area
    • In Write mode, automation is no longer written for MIDI plug-ins when plug-in automation is disabled in automation preferences
    • A long click on a horizontal MIDI Draw automation line no longer unexpectedly changes it to a vertical line
    • When a region is copied at the same position from one track to another using the same channel strip, Logic no longer asks whether automation should be copied
    • When adjusting velocity in MIDI Draw, the velocity now displays as expected in the Tooltip
    • Engaging the mute switch on one automation lane no longer mutes automation on other lanes
    • Undo now works correctly when used after opening Automation lanes
    • It's now possible to use the up and down arrow keys to navigate the track list when Automation lanes are disclosed on some tracks
    • Setting an automation mode for an Aux in the main window Channel Strip Inspector now creates a track for the Aux in the Tracks area
    • A single click in MIDI Draw no longer creates multiple automation points
    • It's no longer possible to place two automation points for the same parameter in a track on the same clock tick
    • When automation is enabled for the first time in a project, the power buttons for track automation now default to On for each track

    Flex

    • Flex pitch now works in areas of audio regions where fades have been applied
    • When the flex mode is changed on a track, flex is no longer enabled on regions where flex had been disabled
    • When the delete key is used to remove a flex marker in one track of an editing group, the corresponding flex markers in other tracks in the group are now reliably deleted as well
    • Edits applied to split stereo audio files no longer remove or corrupt existing flex edits on those files
    • Resetting manual flex pitch edits no longer causes all flex pitch values to disappear in the Tracks window
    • Double-clicking a flex pitched note in the Tracks area now resets its pitch as expected
    • When a flex pitch edit is applied to a note in a Take, the pitch values displayed for other notes in the Take are no longer incorrectly displayed as having the same value
    • The Create MIDI Track from Flex Pitch Data command now works reliably on the first try
    • Undo after gluing two flex pitched notes together now works as expected
    • Flex pitched notes now continue to display reliably after the region containing them is divided
    • Key signature changes no longer cause unexpected transposition of flex pitched audio tracks

    Fades

    • Edits applied to fades are now audible during playback
    • Flex edits applied to regions with fades are now audible during playback
    • When switching Project Alternatives, Logic no longer plays fades incorrectly
    • It's now possible to change the Fade type in the Region Inspector when multiple regions with fades of different lengths are selected

    Drummer

    • The Follow option in the Drummer editor now works as expected when the track followed contains take regions
    • Extending a looped Drummer region to the right over another region no longer removes the beginning of the second region – instead, the loop ends at the start of the new region
    • Transform is now available on Drummer regions converted to MIDI on the Drummer track
    • New Drummer channel strips set to Surround no longer default to “No Output”
    • It's again possible to open a Drummer track that has been converted to audio with the "Bounce > And Replace all Tracks" command in the Audio Editor

    Global Tracks

    • Highlighted text fields in Global Tracks pop-up windows now maintain proper alignment when the window is resized
    • Beat Mapping using “Tolerate missing or additional events” now works with time signatures of 3/4, 5/4, and 6/4 as well as 4/4
    • Deleting beat markers on the Beat Mapping track now reliably deletes the corresponding tempo events
    • The Eraser tool now works reliably when deleting beat markers in the Beat Mapping track
    • The beat mapping track now always shows a handle at the beginning and end of a region, whether or not there is a detected transient at those positions
    • Markers are now displayed in the timeline when the Global Marker track is not visible
    • When the starting time code for a project has been changed from the default, copying an Arrangement Marker no longer resets the project’s starting timecode to 00:00:00:0000
    • If the Marker track is hidden, renaming an Arrangement marker no longer causes it to be shown
    • The Marker Track now maintains its set height when a screen set is recalled
    • Tooltips are again displayed when moving or copying Markers and Arrangement Markers
    • It's now possible to show/hide individual global tracks after adding a movie to a project
    • Switching from one Tempo Set to another while pressing Option now copies the first Tempo Set

    Import

    • When importing tracks from another project, the import sheet now shows individual tracks within Track Stacks by default
    • Importing an XML file with a different frame rate into Logic Pro no longer causes an unexpected SMPTE offset
    • Lyrics with non-standard ASCII characters in MIDI files now import correctly
    • When importing long MP3 files, Logic no longer creates AIFF files that are larger than necessary
    • It is again possible to drag and drop a movie from the Finder to the Movie track

    Export/Sharing

    • Logic now remembers the last settings used to export audio to a movie
    • Improves reliability when exporting Music XML for songs with a large number of tracks
    • Regions that start after 1 1 1 1 are now handled properly when exported to Music XML
    • Logic now retains chapter markers from imported movies after audio has been exported to the movie
    • It's again possible to share to iTunes directly from the Bounce window
    • Logic now creates properly configured key signatures in exported MIDI files
    • Settings made in the Bounce window are now retained the next time Bounce is used

    Score

    • Duration bars are now available for independent notes in the Score window
    • Step Input now creates whole notes of the correct length
    • Tied notes shorter than a dotted 32nd tied to a tuplet can again be displayed
    • The staff shown in the Staff Styles window now reflects the key signature that results from changes to the Transpose setting
    • Independent notes are now displayed correctly on drum tracks
    • In the Score it is no longer possible to create a beat grouping whose sum exceeds the total number of beats in the time signature
    • The cursor for the alternate (Command key) tool in the Score now reliably shows the tool when the Command key is pressed
    • If Interpretation is enabled and a note of shorter duration than the current display quantize setting is dragged to the staff, interpretation is automatically defeated for the dragged note, so that it displays as intended
    • The Undo Quantization key command and menu item again works in the Score
    • Adding a new Drum Group assignment again works as expected in the Score window
    • The Staff Style editor now immediately updates to show newly added staves
    • Undo now works as expected after editing brackets and lines in the Staff Style window
    • The Fix Displayed Note Positions & Durations command no longer causes notes to shift position
    • It is now possible to use Command or Shift to select multiple markings in the Chord Grid Editor
    • Clicking in the background of the Score with the Zoom tool after zooming now reliably returns to the previous zoom setting
    • The Camera tool in the Score now properly captures lines and ties
    • The Sonata score font now works as expected with Logic Pro X on OS X Yosemite
    • The edit handles for slurs and crescendos are now easier to click
    • Double-clicking a chord extension now opens the Chord Symbol dialog

    Key Commands

    • When editing key commands, Logic now correctly warns for all conflicts with an entered key command
    • The Hide Selected Track key command now affects all selected tracks
    • The various windows key command “Mute Notes/Regions/Folders” now works in the Step Editor
    • The key commands to move and adjust Marquee selections now behave correctly when used on Take regions
    • The key command to toggle the Loop Browser now works correctly when the bottom portion of the Loop Browser has focus
    • Unused audio files are now properly highlighted when the Select Unused key command is used
    • The key commands for Set Quantize Parameter to Next/Previous Value now work as expected in the Piano Roll editor
    • The key commands for FWD by Transient and RWD by Transient are now assigned by default to Control + and Control - respectively
    • There's now a key command to toggle the Musical Grid between bars and beats, and SMPTE time

    Plug-Ins

    • Notes in high octaves now loop reliably in all EXS instruments
    • When in MIDI Mono Mode, EXS24 now responds to channel pressure independently per MIDI channel
    • The Recall Default plug-in setting now works with the Delay Designer plug-in
    • It's now possible to dynamically hide or show parameters in the Scripter plug-in
    • The Arpeggiator plug-in’s Pattern name now instantly updates when changes are made to the selected pattern name, or a pattern is loaded or deleted
    • The Power button in a MIDI plug-in window can now be mapped to a Smart Control
    • Audio Unit MIDI plug-ins now play back at the correct tempo when the project sample rate is set to something other than 441 kHz
    • Scrolling numerical values with the mouse in the Channel EQ again works as expected
    • Ultrabeat and EXS24 now remain in sync when the project tempo is changed during playback
    • When Logic’s playhead is moved while playback is stopped, the playhead in an inserted Melodyne plug-in now updates to show the correct position
    • The Gain plug-in no longer introduces clicks when switching between mono and stereo, or swapping L and R
    • The text showing the db value for the Output Gain slider on Amp Designer displays as expected
    • In the Pitch Shifter plug-in, changing the Stereo Link from Inverse to Normal no longer causes some of the unprocessed signal to sound when the Mix setting is 100%
    • The Ensemble plug-in now outputs audio to the left channel in single voice mode
    • Removing a multi-output Software Instrument track now also removes its associated Aux channels from the Mixer
    • The text for the Show/Hide all Plug-in Windows menu now correctly matches the current state of the plug-in windows
    • Custom I/O labels now show up correctly with the External Instrument and I/O plug-ins

    Synchronization

    • Logic now properly distinguishes between and supports 24 fps and 23976 fps time code

    Accessibility

    • Voiceover now works when the Tab key is used to jump to the Smart Controls Editor
    • Plug-in slots on channel strips are now accessible with VoiceOver
    • Edits to region names, looping and region borders are again possible using VoiceOver
  • by Edgar,

    Edgar Edgar Jan 21, 2015 3:57 PM in response to The Art Of Sound
    Level 4 (3,356 points)
    Audio
    Jan 21, 2015 3:57 PM in response to The Art Of Sound

    Thanks for the Release notes. My page is still on 10.0.7

  • by Len Gold,

    Len Gold Len Gold Jan 21, 2015 3:58 PM in response to Len Gold
    Level 1 (15 points)
    Jan 21, 2015 3:58 PM in response to Len Gold

    Update now available and downloaded - problem solved.

  • by Pancenter,

    Pancenter Pancenter Jan 21, 2015 4:00 PM in response to The Art Of Sound
    Level 6 (9,928 points)
    Audio
    Jan 21, 2015 4:00 PM in response to The Art Of Sound

    That is truly a mind-boggling list!

  • by The Art Of Sound,

    The Art Of Sound The Art Of Sound Jan 21, 2015 4:00 PM in response to Edgar
    Level 6 (12,107 points)
    Jan 21, 2015 4:00 PM in response to Edgar

    Yes.. same here Edgar...

     

    Seems like they changed a few things and took to original update notes offline...

     

    This one now seems to work....

     

    Logic Pro X 10.1 Release Notes - Apple Support

     

    But in case it disappears again, I posted up the full list...

  • by The Art Of Sound,

    The Art Of Sound The Art Of Sound Jan 21, 2015 4:09 PM in response to Pancenter
    Level 6 (12,107 points)
    Jan 21, 2015 4:09 PM in response to Pancenter

    Pancenter wrote:

     

    That is truly a mind-boggling list!

     

    Indeed..

     

    The (not bug fixes) highlights (so far) for me are...

     

    • The Plug-in Manager now allows you to customize the organization of your menu (About time!)
    • When Logic extracts audio from a movie file, it now creates a time-stamped Broadcast Wave file
    • There's now a button in the Main window to automatically set the vertical zoom to the optimal resolution to maximize track height while keeping all tracks visible
    • When bouncing a project, the default name for the bounced file is now the project name (Finally instead of Output 1-2!)
    • Auto backups of Logic projects are now directly accessible from the Quick Looks view
    • Automation can now be part of a region, not just the track (Region based Automation.... Ho Ho Ho!)
    • There's now a Kill/Recall Solo button in the track header area that toggles the solo state of all currently soloed tracks (heh....)
    • Time Handles in the Piano Roll allow time stretching/compression on selected notes
    • Flex pitch now works in areas of audio regions where fades have been applied (Again, thank goodness!)
  • by The Art Of Sound,

    The Art Of Sound The Art Of Sound Jan 21, 2015 4:41 PM in response to The Art Of Sound
    Level 6 (12,107 points)
    Jan 21, 2015 4:41 PM in response to The Art Of Sound

    and I have just discovered this little gem....

     

    Manage large-scale mixes more easily with the addition of console-style VCA faders

  • by Pancenter,

    Pancenter Pancenter Jan 21, 2015 6:29 PM in response to The Art Of Sound
    Level 6 (9,928 points)
    Audio
    Jan 21, 2015 6:29 PM in response to The Art Of Sound


    Nigel,

     

    Perhaps you and a few others can give a performance assessment of the update running w/Yosemite. No hurry, in the next few days.

  • by Data Stream Studio,

    Data Stream Studio Data Stream Studio Jan 21, 2015 7:13 PM in response to Len Gold
    Level 4 (3,563 points)
    Audio
    Jan 21, 2015 7:13 PM in response to Len Gold

    Looks like they've upped the system requirements. No more mountain lion.... mavericks minimum.

  • by Data Stream Studio,

    Data Stream Studio Data Stream Studio Jan 21, 2015 7:17 PM in response to Pancenter
    Level 4 (3,563 points)
    Audio
    Jan 21, 2015 7:17 PM in response to Pancenter

    Looks like they've upped the system requirements. No more mountain lion.... mavericks minimum.

  • by The Art Of Sound,

    The Art Of Sound The Art Of Sound Jan 21, 2015 7:20 PM in response to Pancenter
    Level 6 (12,107 points)
    Jan 21, 2015 7:20 PM in response to Pancenter

    Pancenter wrote:

     


    Nigel,

     

    Perhaps you and a few others can give a performance assessment of the update running w/Yosemite. No hurry, in the next few days.

     

    Yes.. It will be at least the weekend until I get a chance to test 10.1 under Yosemite..

     

    Currently Im testing 10.1 under Mavericks as that was, previous to the 10.1 update, at least a fairly stable combo of  OS X and LPX

  • by The Art Of Sound,

    The Art Of Sound The Art Of Sound Jan 21, 2015 7:20 PM in response to Data Stream Studio
    Level 6 (12,107 points)
    Jan 21, 2015 7:20 PM in response to Data Stream Studio

    Good catch DSS...

     

    One of my clients just emailed me reporting issues updating.. Now I know why....

Page 1 of 8 last Next