edgarfromhünibach

Q: Is FCE (Final Cut Express) compatible with Yosemite?

I plan to upgrade from Mountain lion to Yosemite, but I want to continue my film editing with FCE

iMac (27-inch Late 2009), iOS 8.1

Posted on Nov 24, 2014 5:43 AM

Close

Q: Is FCE (Final Cut Express) compatible with Yosemite?

  • All replies
  • Helpful answers

  • by Ian R. Brown,

    Ian R. Brown Ian R. Brown Nov 30, 2014 2:55 AM in response to edgarfromhünibach
    Level 6 (18,660 points)
    Mac OS X
    Nov 30, 2014 2:55 AM in response to edgarfromhünibach

    People are reporting different amounts of success so nobody will be able to give you a categorical answer.

     

    The easiest and safest way to test Yosemite (or any other OS) is to open Disk Utility and create a small partition (25GB) on your internal hard drive (or a spare one).

     

    You can then download and install Yosemite on that partition to test whether your favourite apps still work OK.

     

    Your Mac will have dual-boot capability and whenever  you start up you can select which OS to open.

     

    When you are satisfied that your apps work with Yosemite you can delete the small partition and install Yosemite normally.

     

    WARNING !

     

    Whilst this procedure is normally perfectly safe, it is always prudent to have everything backed up.

  • by Graham Giles,

    Graham Giles Graham Giles Feb 7, 2015 4:28 PM in response to Ian R. Brown
    Level 1 (20 points)
    Feb 7, 2015 4:28 PM in response to Ian R. Brown

    Is it really possible to instal Yosemite on a spare stand alone disc ??

    How can I do this as only an upgrade seems to be offered ?

  • by MartinR,Solvedanswer

    MartinR MartinR Apr 27, 2015 3:18 AM in response to edgarfromhünibach
    Level 6 (14,891 points)
    Apr 27, 2015 3:18 AM in response to edgarfromhünibach

    It may be possible, but imho not advisable.  FCE was discontinued in June 2011, even before Lion was released.  It has not been supported since then.  So, we (you) are on your own if you want to try using it on later versions of OS X.  I'd say you are pretty lucky that it works on Mt. Lion for you.

     

    I have not tried to install/run FCE on Yosemite myself, and won't.  Much as I like FCE, it is old (obsolete) software compared to the current release of OS X and I wouldn't trust my precious video editing to a combination of an obsolete app + a new operating system.   For what it's worth, I locked down my editing systems on FCE 4.0.1 + Snow Leopard 10.6.8 because that's the last supported combination of the two and it works perfectly.  Beyond that, the combination of Final Cut Pro X + Yosemite is the currently supported version of each.

  • by Ian R. Brown,

    Ian R. Brown Ian R. Brown Feb 8, 2015 2:33 AM in response to Graham Giles
    Level 6 (18,660 points)
    Mac OS X
    Feb 8, 2015 2:33 AM in response to Graham Giles

    I'm not  sure what you mean?

     

    My suggestion to create 2 partitions will work perfectly and the creation of the extra partition is very easy and takes a minute or so  .  .  .  .  installing the OS will take the normal time of course, up to an hour. If you decide later you don't need that bootable partition you can easily delete it so that your boot drive reverts to its previous state.

     

    You will need an original copy of FCE 4, as the downloadable 4.0.1 update is precisely that, not a standalone app.

  • by Graham Giles,

    Graham Giles Graham Giles Feb 8, 2015 4:15 AM in response to Ian R. Brown
    Level 1 (20 points)
    Feb 8, 2015 4:15 AM in response to Ian R. Brown

    You say install on internal  hard drive or 'a spare one'

    I wanted to not interfere with my internal drive but use an external one for this test but cannot find a complete Yosemite that could be used. It seems to be just an upgrade.

    Should I install say Mountain Lion (for which I have a disc) and upgrade from there.Then this could be my start-up drive - or not ?

    I also have FCE 4 disc too and FCE is working fine on Mavericks !

     

    My profile is updated to reflect my current gear.

  • by Ian R. Brown,

    Ian R. Brown Ian R. Brown Feb 8, 2015 8:20 AM in response to Graham Giles
    Level 6 (18,660 points)
    Mac OS X
    Feb 8, 2015 8:20 AM in response to Graham Giles

    The simplest way is to use your existing internal drive as long as it is not full (say less than 75%).

     

    The partition does not need to be more than 15 - 25GB.

     

    You download Yosemite from the App Store.

     

    Your ML disc should be fine.

  • by Graham Giles,

    Graham Giles Graham Giles Feb 8, 2015 9:31 AM in response to Ian R. Brown
    Level 1 (20 points)
    Feb 8, 2015 9:31 AM in response to Ian R. Brown

    Thanks Ian. My problem is that I have several unfinished edits in FCE on my Mavericks machine. These will be added to in due course so I cannot afford to close

    the projects. Optimism says that Yosemite will still be ok but I am loth to take that risk having got away with it once already ! Also I use iDVD for mastering !

    How about loading ML from my disc on to a hard drive that is empty. Then can I start up from that and upgrade to Yos. afterwards and add put FCE on to that disc to see if it will still work ?

    I understand what you say about FCPX and am prepared to buy it but I am not keen on a new learn and it has such a poor reputation !

  • by Ian R. Brown,

    Ian R. Brown Ian R. Brown Feb 8, 2015 12:17 PM in response to Graham Giles
    Level 6 (18,660 points)
    Mac OS X
    Feb 8, 2015 12:17 PM in response to Graham Giles

    Yes, that would be ideal with no risk whatsoever. You could have it all done and dusted in around an hour.

     

    Where has FCP X got a bad reputation?

     

    Back in 2011 it was introduced somewhat prematurely and like most new things it contained flaws and omissions, but within a year it had been vastly improved and was probably the best editor around.

     

    Since then, it has been further refined and few, other than the diehards you always get, would say it was anything other than excellent.

  • by Graham Giles,

    Graham Giles Graham Giles Feb 10, 2015 3:04 AM in response to Ian R. Brown
    Level 1 (20 points)
    Feb 10, 2015 3:04 AM in response to Ian R. Brown

    Thanks Ian. I will try using a separate hard drive as a test out but have reservations about it being possible or what it may do to Mavericks.

    I have read in several places how steep a learning curve is FCPX and am concerned about that aspect. Glad to know you think it's now all good.

  • by Ian R. Brown,

    Ian R. Brown Ian R. Brown Feb 10, 2015 5:52 AM in response to Graham Giles
    Level 6 (18,660 points)
    Mac OS X
    Feb 10, 2015 5:52 AM in response to Graham Giles

    Using a separate bootable hard drive in the way I described works perfectly.

     

    I have done it numerous times over the past few years to enable me to use apps that would not work with the latest operating systems installed on my computer and I have at least 2 hard drives configured that way at the moment.

     

    It won't have any ill effect on your computer as it is basically just an extra operating system that your computer can use when needed.

     

    Any USB 2.0/3.0 or Firewire hard drive can be used.

  • by TinkerToyz,

    TinkerToyz TinkerToyz Mar 13, 2015 6:45 PM in response to edgarfromhünibach
    Level 1 (0 points)
    Mar 13, 2015 6:45 PM in response to edgarfromhünibach

    Apologies in advance: I'm going to be a bit of an antagonist here.

    I upgraded to Yosemite from 10.6.8 and enjoyed HOURS of Final Cut Express without issue. I had the same iMac as you. Three weeks after upgrade, the hard drive crashed. I had to re-install the OS and when I tried to reinstall FCE from the original disks, OSX 10.10.2 choked.

    Why FCE works on the upgrade, but not on native install to Yosemite is anyone's guess.

    Contrary to "MartinR", FCE is not 'obsolete'. It is perfectly fine (unless he's referring to the fact that it ...STILL... doesn't support native MP4, AVI, WMV, RM, MKV, nor MPG! hee hee).

    Incidentally, two weeks after that post, Apple announced it was dropping support for Snow Leopard altogether. So 'locking down one's editing system on FCE 4.0.1 + Snow Leopard 10.6.8 because that's the last supported combination of the two' is no longer a solution either.

    Bottom line, Apple bowed out of affordable quality video editing when they started charging $15 for iMovie in the app store. (Not to imply iMovie=quality).

    Which brings up an important point if you are re-installing your OS: iMovie and Garage Band are no longer bundled and you will need to run a third party software per Apple's instructions if upgrading from 10.6.

    Alas, it is a good thing I have Bootcamp still. And so, it's over to my other partition for me, where Premiere, Magix and Vegas await loyally. ...and without the need for a third party solution. "Final Cut".... indeed.