jerrremyyy

Q: OnyX/DiskUtilities repair disk while restarting, restart DiskUtilities show no errors

Hi, today I've been busy cleaning my mac because the 'About this mac - storage' stated I had 18GB of movies while I know that all my movies are on USB stick.

Ive started doing some digging on internet and got rid of the problem.


Then I noticed that I my 'Other Storage' was 38GB (and i only have 64 in total).


I had a look for myself in Library, I saw some files from Yahoo. I never ever use/have used Yahoo but I remember few weeks ago I got this annoying banner app, so I've deleted them. Now what might be the problem is that I think I overlooked between all the Yahoo files, there might be one Bonjour file I've deleted with the other files. Didnt delete anything from other folders (because Im not an expert, just know what am doing normally).


Ran OnyX and told me I have to repair my disk with DiskUtilities while restarting the mac using cmd+R.

I restart my computer, verify disk without any problems, repair disk without any problems, restart mac again, run OnyX and it says I have to repair with DiskUtilities while restarting. I check DiskUtilities while normal operating my mac and it gives me the same message OnyX gives me. Am basically just running in circles.


(sorry for all the colour mixes. I can't seem to change the colour after copy/edit)


This is what DiskUtilities report gives me:

Verifying volume “Macintosh HD”Verifying storage systemChecking volumedisk0s2: Scan for Volume Headersdisk0s2: Scan for Disk LabelsLogical Volume Group 47320312-D9AE-4B82-9474-52245E503607 on 1 devicedisk0s2: Scan for Metadata VolumeLogical Volume Group has a 24 MB Metadata Volume with double redundancyStart scanning metadata for a valid checkpointLoad and verify Segment HeadersLoad and verify Checkpoint PayloadLoad and verify Transaction SegmentIncorporate 0 newer non-checkpoint transactionsLoad and verify Virtual Address TableLoad and verify Segment Usage TableLoad and verify Metadata SuperblockLoad and verify Logical Volumes B-TreesLogical Volume Group contains 1 Logical VolumeLoad and verify 3F3BEB1A-5B33-4253-B3E7-E532B22B3F72Load and verify 551670D3-EAC1-4E90-BB46-4087307708EDLoad and verify Freespace SummaryLoad and verify Block AccountingLoad and verify Live Virtual AddressesNewest transaction commit checkpoint is validLoad and verify Segment CleaningThe volume 47320312-D9AE-4B82-9474-52245E503607 appears to be OKStorage system check exit code is 0.Verifying file system.Using live mode.Checking Journaled HFS Plus volume.Checking extents overflow file.Checking catalog hierarchy.Invalid directory item count(It should be 33 instead of 32)Invalid directory item count(It should be 33 instead of 32)Checking extended attributes file.Checking volume bitmap.File system check exit code is 8.Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.


Report from OnyX:

Error: -69845: File system verify or repair failed

Underlying error: 8: POSIX reports: Exec format error

 

The disk needs to be repaired.



Thank you


MacBook Air, OS X Yosemite (10.10.4), null

Posted on Jul 17, 2015 6:23 PM

Close

Q: OnyX/DiskUtilities repair disk while restarting, restart DiskUtilities show no errors

  • All replies
  • Helpful answers

  • by Linc Davis,

    Linc Davis Linc Davis Jul 17, 2015 8:11 PM in response to jerrremyyy
    Level 10 (208,000 points)
    Applications
    Jul 17, 2015 8:11 PM in response to jerrremyyy
    This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.

    Have you done that, and if so, what happened?

  • by jerrremyyy,

    jerrremyyy jerrremyyy Jul 17, 2015 8:20 PM in response to Linc Davis
    Level 1 (0 points)
    Jul 17, 2015 8:20 PM in response to Linc Davis

    Yes, I thought I explained that but I guess its not clear.

     

    So when the logo appeared on the screen, I pressed cmd R, verified my Macintosh HD with no errors + repaired after with no errors.

     

    I restart after, login to my account (only account), do the same actions with DiskUtilities and I get the error as shown above but I can't hit the Repair button. I can only do so when I restart my mac and enter DiskUtilities through cmd R.

     

    I just noticed that I didnt copied the log file - also don't know if it shows the same thing as what I pasted at the start of the topic - so here it is:

     

    **********

    2015-05-03 21:46:51 +0800: Disk Utility started.

     

     

    **********

    2015-07-18 10:36:39 +1000: Disk Utility started.

     

     

    2015-07-18 10:36:45 +1000: Verifying volume “Macintosh HD”

    2015-07-18 10:36:45 +1000: Starting verification tool:

    2015-07-18 10:36:45 +1000: Verifying storage system

    2015-07-18 10:36:45 +1000: Checking volume

    2015-07-18 10:36:45 +1000: disk0s2: Scan for Volume Headers

    2015-07-18 10:36:45 +1000: disk0s2: Scan for Disk Labels

    2015-07-18 10:36:45 +1000: Logical Volume Group 47320312-D9AE-4B82-9474-52245E503607 on 1 device

    2015-07-18 10:36:45 +1000: disk0s2: Scan for Metadata Volume

    2015-07-18 10:36:45 +1000: Logical Volume Group has a 24 MB Metadata Volume with double redundancy

    2015-07-18 10:36:45 +1000: Start scanning metadata for a valid checkpoint

    2015-07-18 10:36:45 +1000: Load and verify Segment Headers

    2015-07-18 10:36:45 +1000: Load and verify Checkpoint Payload

    2015-07-18 10:36:45 +1000: Load and verify Transaction Segment

    2015-07-18 10:36:45 +1000: Incorporate 0 newer non-checkpoint transactions

    2015-07-18 10:36:45 +1000: Load and verify Virtual Address Table

    2015-07-18 10:36:45 +1000: Load and verify Segment Usage Table

    2015-07-18 10:36:45 +1000: Load and verify Metadata Superblock

    2015-07-18 10:36:45 +1000: Load and verify Logical Volumes B-Trees

    2015-07-18 10:36:45 +1000: Logical Volume Group contains 1 Logical Volume

    2015-07-18 10:36:45 +1000: Load and verify 3F3BEB1A-5B33-4253-B3E7-E532B22B3F72

    2015-07-18 10:36:45 +1000: Load and verify 551670D3-EAC1-4E90-BB46-4087307708ED

    2015-07-18 10:36:45 +1000: Load and verify Freespace Summary

    2015-07-18 10:36:45 +1000: Load and verify Block Accounting

    2015-07-18 10:36:45 +1000: Load and verify Live Virtual Addresses

    2015-07-18 10:36:45 +1000: Newest transaction commit checkpoint is valid

    2015-07-18 10:36:46 +1000: Load and verify Segment Cleaning

    2015-07-18 10:36:46 +1000: The volume 47320312-D9AE-4B82-9474-52245E503607 appears to be OK

    2015-07-18 10:36:46 +1000: Storage system check exit code is 0.

    2015-07-18 10:36:46 +1000: Verifying file system.

    2015-07-18 10:36:46 +1000: Using live mode.

    2015-07-18 10:36:46 +1000: Checking Journaled HFS Plus volume.

    2015-07-18 10:36:46 +1000: Checking catalog file.

    2015-07-18 10:36:57 +1000: Checking catalog hierarchy.

    2015-07-18 10:37:08 +1000: Invalid directory item count

    2015-07-18 10:37:08 +1000: (It should be 33 instead of 32)

    2015-07-18 10:37:08 +1000: (It should be 33 instead of 32)

    2015-07-18 10:37:08 +1000: (It should be 33 instead of 32)

    2015-07-18 10:37:08 +1000: Checking extended attributes file.

    2015-07-18 10:37:13 +1000: Checking volume bitmap.

    2015-07-18 10:37:13 +1000: File system check exit code is 8.

    2015-07-18 10:37:13 +1000: Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.

    2015-07-18 10:37:13 +1000:

     

     

    2015-07-18 10:37:13 +1000: Disk Utility stopped verifying “Macintosh HD”: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.

     

     

    2015-07-18 10:37:13 +1000:

     

     

    2015-07-18 10:37:55 +1000: Repairing permissions for “Macintosh HD”

    2015-07-18 10:38:08 +1000: Open error 22: “Invalid argument” on System/Library/PrivateFrameworks/PhotoLibraryPrivate.framework/Versions/A/Frame works/Faces.framework/Versions/A/Resources/0003.dat

    2015-07-18 10:38:11 +1000: Permissions differ on “usr/libexec/cups”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:11 +1000: Repaired “usr/libexec/cups”

    2015-07-18 10:38:11 +1000: Permissions differ on “usr/libexec/cups/apple”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:11 +1000: Repaired “usr/libexec/cups/apple”

    2015-07-18 10:38:11 +1000: Permissions differ on “usr/libexec/cups/backend”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:11 +1000: Repaired “usr/libexec/cups/backend”

    2015-07-18 10:38:11 +1000: Permissions differ on “usr/libexec/cups/cgi-bin”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:11 +1000: Repaired “usr/libexec/cups/cgi-bin”

    2015-07-18 10:38:11 +1000: Permissions differ on “usr/libexec/cups/daemon”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:11 +1000: Repaired “usr/libexec/cups/daemon”

    2015-07-18 10:38:11 +1000: Permissions differ on “usr/libexec/cups/filter”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:11 +1000: Repaired “usr/libexec/cups/filter”

    2015-07-18 10:38:11 +1000: Permissions differ on “usr/libexec/cups/monitor”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:11 +1000: Repaired “usr/libexec/cups/monitor”

    2015-07-18 10:38:11 +1000: Permissions differ on “usr/libexec/cups/notifier”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:11 +1000: Repaired “usr/libexec/cups/notifier”

    2015-07-18 10:38:13 +1000: Group differs on “Library/Printers”; should be 80; group is 0.

    2015-07-18 10:38:13 +1000: Permissions differ on “Library/Printers”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:13 +1000: Repaired “Library/Printers”

    2015-07-18 10:38:13 +1000: Group differs on “Library/Printers/Icons”; should be 80; group is 0.

    2015-07-18 10:38:13 +1000: Permissions differ on “Library/Printers/Icons”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:13 +1000: Repaired “Library/Printers/Icons”

    2015-07-18 10:38:13 +1000: Group differs on “Library/Printers/InstalledPrinters.plist”; should be 80; group is 0.

    2015-07-18 10:38:13 +1000: Permissions differ on “Library/Printers/InstalledPrinters.plist”; should be -rw-rw-rw- ; they are -rw-r--r-- .

    2015-07-18 10:38:13 +1000: Repaired “Library/Printers/InstalledPrinters.plist”

    2015-07-18 10:38:25 +1000: Permissions differ on “Library/Java”; should be drwxr-xr-x ; they are drwxrwxr-x .

    2015-07-18 10:38:25 +1000: Repaired “Library/Java”

    2015-07-18 10:38:25 +1000: Group differs on “Library/Preferences/com.apple.alf.plist”; should be 80; group is 0.

    2015-07-18 10:38:25 +1000: Repaired “Library/Preferences/com.apple.alf.plist”

    2015-07-18 10:38:25 +1000: Group differs on “Library/Printers/Canon”; should be 80; group is 0.

    2015-07-18 10:38:25 +1000: Permissions differ on “Library/Printers/Canon”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:25 +1000: Repaired “Library/Printers/Canon”

    2015-07-18 10:38:25 +1000: Group differs on “Library/Printers/Canon/IJScanner”; should be 80; group is 0.

    2015-07-18 10:38:25 +1000: Permissions differ on “Library/Printers/Canon/IJScanner”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:25 +1000: Repaired “Library/Printers/Canon/IJScanner”

    2015-07-18 10:38:25 +1000: Group differs on “Library/Printers/Canon/IJScanner/Frameworks”; should be 80; group is 0.

    2015-07-18 10:38:25 +1000: Permissions differ on “Library/Printers/Canon/IJScanner/Frameworks”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:25 +1000: Repaired “Library/Printers/Canon/IJScanner/Frameworks”

    2015-07-18 10:38:25 +1000: Group differs on “Library/Printers/Canon/IJScanner/Plugins”; should be 80; group is 0.

    2015-07-18 10:38:25 +1000: Permissions differ on “Library/Printers/Canon/IJScanner/Plugins”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:25 +1000: Repaired “Library/Printers/Canon/IJScanner/Plugins”

    2015-07-18 10:38:25 +1000: Group differs on “Library/Printers/Canon/IJScanner/Resources”; should be 80; group is 0.

    2015-07-18 10:38:25 +1000: Permissions differ on “Library/Printers/Canon/IJScanner/Resources”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:25 +1000: Repaired “Library/Printers/Canon/IJScanner/Resources”

    2015-07-18 10:38:25 +1000: Group differs on “Library/Printers/Canon/IJScanner/Resources/CIJIcons”; should be 80; group is 0.

    2015-07-18 10:38:25 +1000: Permissions differ on “Library/Printers/Canon/IJScanner/Resources/CIJIcons”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:25 +1000: Repaired “Library/Printers/Canon/IJScanner/Resources/CIJIcons”

    2015-07-18 10:38:25 +1000: Group differs on “Library/Printers/Canon/IJScanner/Resources/Parameters”; should be 80; group is 0.

    2015-07-18 10:38:25 +1000: Permissions differ on “Library/Printers/Canon/IJScanner/Resources/Parameters”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:25 +1000: Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters”

    2015-07-18 10:38:25 +1000: Group differs on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA”; should be 80; group is 0.

    2015-07-18 10:38:25 +1000: Permissions differ on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:25 +1000: Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA”

    2015-07-18 10:38:25 +1000: Group differs on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA2”; should be 80; group is 0.

    2015-07-18 10:38:25 +1000: Permissions differ on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA2”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:25 +1000: Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA2”

    2015-07-18 10:38:25 +1000: Group differs on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2413”; should be 80; group is 0.

    2015-07-18 10:38:25 +1000: Permissions differ on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2413”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:25 +1000: Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2413”

    2015-07-18 10:38:25 +1000: Group differs on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2414”; should be 80; group is 0.

    2015-07-18 10:38:25 +1000: Permissions differ on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2414”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:25 +1000: Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2414”

    2015-07-18 10:38:25 +1000: Group differs on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4807”; should be 80; group is 0.

    2015-07-18 10:38:25 +1000: Permissions differ on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4807”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:25 +1000: Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4807”

    2015-07-18 10:38:25 +1000: Group differs on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808”; should be 80; group is 0.

    2015-07-18 10:38:25 +1000: Permissions differ on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:25 +1000: Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808”

    2015-07-18 10:38:25 +1000: Group differs on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4809”; should be 80; group is 0.

    2015-07-18 10:38:25 +1000: Permissions differ on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4809”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:25 +1000: Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4809”

    2015-07-18 10:38:25 +1000: Group differs on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9601”; should be 80; group is 0.

    2015-07-18 10:38:25 +1000: Permissions differ on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9601”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:25 +1000: Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9601”

    2015-07-18 10:38:25 +1000: Group differs on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602”; should be 80; group is 0.

    2015-07-18 10:38:25 +1000: Permissions differ on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:25 +1000: Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602”

    2015-07-18 10:38:25 +1000: Group differs on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ_412”; should be 80; group is 0.

    2015-07-18 10:38:25 +1000: Permissions differ on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ_412”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:25 +1000: Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ_412”

    2015-07-18 10:38:25 +1000: Group differs on “Library/Printers/PPDs”; should be 80; group is 0.

    2015-07-18 10:38:25 +1000: Permissions differ on “Library/Printers/PPDs”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:25 +1000: Repaired “Library/Printers/PPDs”

    2015-07-18 10:38:25 +1000: Group differs on “Library/Printers/PPDs/Contents”; should be 80; group is 0.

    2015-07-18 10:38:25 +1000: Permissions differ on “Library/Printers/PPDs/Contents”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:25 +1000: Repaired “Library/Printers/PPDs/Contents”

    2015-07-18 10:38:25 +1000: Group differs on “Library/Printers/PPDs/Contents/Resources”; should be 80; group is 0.

    2015-07-18 10:38:25 +1000: Permissions differ on “Library/Printers/PPDs/Contents/Resources”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:25 +1000: Repaired “Library/Printers/PPDs/Contents/Resources”

    2015-07-18 10:38:52 +1000: Permissions differ on “usr/libexec/cups/driver”; should be drwxr-xr-x ; they are dr-xr-xr-x .

    2015-07-18 10:38:52 +1000: Repaired “usr/libexec/cups/driver”

    2015-07-18 10:38:58 +1000: User differs on “private/etc/hosts”; should be 0; user is 501.

    2015-07-18 10:38:58 +1000: ACL found but not expected on “private/etc/hosts”

    2015-07-18 10:38:58 +1000: Repaired “private/etc/hosts”

    2015-07-18 10:38:58 +1000: Group differs on “private/var/db/GPURestartReporter”; should be 0; group is 80.

    2015-07-18 10:38:58 +1000: Permissions differ on “private/var/db/GPURestartReporter”; should be drwxr-xr-x ; they are drwxrwx--- .

    2015-07-18 10:38:58 +1000: Repaired “private/var/db/GPURestartReporter”

    2015-07-18 10:38:58 +1000: User differs on “private/var/db/displaypolicyd”; should be 0; user is 244.

    2015-07-18 10:38:58 +1000: Group differs on “private/var/db/displaypolicyd”; should be 0; group is 244.

    2015-07-18 10:38:58 +1000: Repaired “private/var/db/displaypolicyd”

    2015-07-18 10:39:03 +1000:

     

     

    2015-07-18 10:39:03 +1000: Permissions repair complete

    2015-07-18 10:39:03 +1000:

     

     

    2015-07-18 10:39:03 +1000:

     

     

    **********

    2015-07-18 10:44:41 +1000: Disk Utility started.

     

     

    2015-07-18 10:44:48 +1000: Verifying partition map for “APPLE SSD TS064E Media”

    2015-07-18 10:44:48 +1000: Starting verification tool:

    2015-07-18 10:44:48 +1000: Checking prerequisites

    2015-07-18 10:44:48 +1000: Checking the partition list

    2015-07-18 10:44:48 +1000: Checking for an EFI system partition

    2015-07-18 10:44:48 +1000: Checking the EFI system partition’s size

    2015-07-18 10:44:48 +1000: Checking the EFI system partition’s file system

    2015-07-18 10:44:48 +1000: Checking the EFI system partition’s folder content

    2015-07-18 10:44:49 +1000: Checking all HFS data partition loader spaces

    2015-07-18 10:44:49 +1000: Checking booter partitions

    2015-07-18 10:44:49 +1000: Checking booter partition disk0s3

    2015-07-18 10:44:49 +1000: Verifying file system.

    2015-07-18 10:44:49 +1000: Checking Journaled HFS Plus volume.

    2015-07-18 10:44:49 +1000: Checking extents overflow file.

    2015-07-18 10:44:49 +1000: Checking catalog file.

    2015-07-18 10:44:49 +1000: Checking multi-linked files.

    2015-07-18 10:44:49 +1000: Checking catalog hierarchy.

    2015-07-18 10:44:49 +1000: Checking extended attributes file.

    2015-07-18 10:44:49 +1000: Checking volume bitmap.

    2015-07-18 10:44:49 +1000: Checking volume information.

    2015-07-18 10:44:49 +1000: The volume Recovery HD appears to be OK.

    2015-07-18 10:44:49 +1000: File system check exit code is 0.

    2015-07-18 10:44:49 +1000: Checking Core Storage Physical Volume partitions

    2015-07-18 10:44:49 +1000: Verifying storage system

    2015-07-18 10:44:49 +1000: Checking volume

    2015-07-18 10:44:49 +1000: disk0s2: Scan for Volume Headers

    2015-07-18 10:44:49 +1000: disk0s2: Scan for Disk Labels

    2015-07-18 10:44:49 +1000: Logical Volume Group 47320312-D9AE-4B82-9474-52245E503607 on 1 device

    2015-07-18 10:44:49 +1000: disk0s2: Scan for Metadata Volume

    2015-07-18 10:44:49 +1000: Logical Volume Group has a 24 MB Metadata Volume with double redundancy

    2015-07-18 10:44:49 +1000: Start scanning metadata for a valid checkpoint

    2015-07-18 10:44:49 +1000: Load and verify Segment Headers

    2015-07-18 10:44:49 +1000: Load and verify Checkpoint Payload

    2015-07-18 10:44:49 +1000: Load and verify Transaction Segment

    2015-07-18 10:44:49 +1000: Incorporate 0 newer non-checkpoint transactions

    2015-07-18 10:44:49 +1000: Load and verify Virtual Address Table

    2015-07-18 10:44:49 +1000: Load and verify Segment Usage Table

    2015-07-18 10:44:49 +1000: Load and verify Metadata Superblock

    2015-07-18 10:44:49 +1000: Load and verify Logical Volumes B-Trees

    2015-07-18 10:44:49 +1000: Logical Volume Group contains 1 Logical Volume

    2015-07-18 10:44:49 +1000: Load and verify 3F3BEB1A-5B33-4253-B3E7-E532B22B3F72

    2015-07-18 10:44:49 +1000: Load and verify 551670D3-EAC1-4E90-BB46-4087307708ED

    2015-07-18 10:44:49 +1000: Load and verify Freespace Summary

    2015-07-18 10:44:49 +1000: Load and verify Block Accounting

    2015-07-18 10:44:49 +1000: Load and verify Live Virtual Addresses

    2015-07-18 10:44:49 +1000: Newest transaction commit checkpoint is valid

    2015-07-18 10:44:49 +1000: Load and verify Segment Cleaning

    2015-07-18 10:44:50 +1000: The volume 47320312-D9AE-4B82-9474-52245E503607 appears to be OK

    2015-07-18 10:44:50 +1000: Storage system check exit code is 0.

    2015-07-18 10:44:50 +1000: The partition map appears to be OK

    2015-07-18 10:44:50 +1000:

     

     

    2015-07-18 10:44:50 +1000: Verifying volume “Macintosh HD”

    2015-07-18 10:44:50 +1000: Starting verification tool:

    2015-07-18 10:44:50 +1000: Verifying storage system

    2015-07-18 10:44:50 +1000: Checking volume

    2015-07-18 10:44:50 +1000: disk0s2: Scan for Volume Headers

    2015-07-18 10:44:50 +1000: disk0s2: Scan for Disk Labels

    2015-07-18 10:44:50 +1000: Logical Volume Group 47320312-D9AE-4B82-9474-52245E503607 on 1 device

    2015-07-18 10:44:50 +1000: disk0s2: Scan for Metadata Volume

    2015-07-18 10:44:50 +1000: Logical Volume Group has a 24 MB Metadata Volume with double redundancy

    2015-07-18 10:44:50 +1000: Start scanning metadata for a valid checkpoint

    2015-07-18 10:44:50 +1000: Load and verify Segment Headers

    2015-07-18 10:44:50 +1000: Load and verify Checkpoint Payload

    2015-07-18 10:44:50 +1000: Load and verify Transaction Segment

    2015-07-18 10:44:50 +1000: Incorporate 0 newer non-checkpoint transactions

    2015-07-18 10:44:50 +1000: Load and verify Virtual Address Table

    2015-07-18 10:44:50 +1000: Load and verify Segment Usage Table

    2015-07-18 10:44:50 +1000: Load and verify Metadata Superblock

    2015-07-18 10:44:50 +1000: Load and verify Logical Volumes B-Trees

    2015-07-18 10:44:50 +1000: Logical Volume Group contains 1 Logical Volume

    2015-07-18 10:44:50 +1000: Load and verify 3F3BEB1A-5B33-4253-B3E7-E532B22B3F72

    2015-07-18 10:44:50 +1000: Load and verify 551670D3-EAC1-4E90-BB46-4087307708ED

    2015-07-18 10:44:50 +1000: Load and verify Freespace Summary

    2015-07-18 10:44:50 +1000: Load and verify Block Accounting

    2015-07-18 10:44:50 +1000: Load and verify Live Virtual Addresses

    2015-07-18 10:44:50 +1000: Newest transaction commit checkpoint is valid

    2015-07-18 10:44:50 +1000: Load and verify Segment Cleaning

    2015-07-18 10:44:50 +1000: The volume 47320312-D9AE-4B82-9474-52245E503607 appears to be OK

    2015-07-18 10:44:50 +1000: Storage system check exit code is 0.

    2015-07-18 10:44:50 +1000: Verifying file system.

    2015-07-18 10:44:50 +1000: Using live mode.

    2015-07-18 10:44:51 +1000: Checking extents overflow file.

    2015-07-18 10:45:02 +1000: Checking catalog hierarchy.

    2015-07-18 10:45:14 +1000: (It should be 33 instead of 32)

    2015-07-18 10:45:14 +1000: Checking extended attributes file.

    2015-07-18 10:45:19 +1000: Checking volume information.

    2015-07-18 10:45:19 +1000: File system check exit code is 8.

    2015-07-18 10:45:19 +1000: Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.

    2015-07-18 10:45:19 +1000:

     

     

    2015-07-18 10:45:19 +1000: Disk Utility stopped verifying “Macintosh HD”: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.

     

     

    2015-07-18 10:45:19 +1000:

     

     

    **********

    2015-07-18 10:49:20 +1000: Disk Utility started.

     

     

    2015-07-18 11:08:36 +1000: Verifying volume “Macintosh HD”

    2015-07-18 11:08:36 +1000: Starting verification tool:

    2015-07-18 11:08:36 +1000: Verifying storage system

    2015-07-18 11:08:36 +1000: Checking volume

    2015-07-18 11:08:36 +1000: disk0s2: Scan for Volume Headers

    2015-07-18 11:08:36 +1000: disk0s2: Scan for Disk Labels

    2015-07-18 11:08:36 +1000: Logical Volume Group 47320312-D9AE-4B82-9474-52245E503607 on 1 device

    2015-07-18 11:08:36 +1000: disk0s2: Scan for Metadata Volume

    2015-07-18 11:08:36 +1000: Logical Volume Group has a 24 MB Metadata Volume with double redundancy

    2015-07-18 11:08:36 +1000: Start scanning metadata for a valid checkpoint

    2015-07-18 11:08:36 +1000: Load and verify Segment Headers

    2015-07-18 11:08:36 +1000: Load and verify Checkpoint Payload

    2015-07-18 11:08:36 +1000: Load and verify Transaction Segment

    2015-07-18 11:08:36 +1000: Incorporate 0 newer non-checkpoint transactions

    2015-07-18 11:08:36 +1000: Load and verify Virtual Address Table

    2015-07-18 11:08:36 +1000: Load and verify Segment Usage Table

    2015-07-18 11:08:36 +1000: Load and verify Metadata Superblock

    2015-07-18 11:08:36 +1000: Load and verify Logical Volumes B-Trees

    2015-07-18 11:08:36 +1000: Logical Volume Group contains 1 Logical Volume

    2015-07-18 11:08:36 +1000: Load and verify 3F3BEB1A-5B33-4253-B3E7-E532B22B3F72

    2015-07-18 11:08:36 +1000: Load and verify 551670D3-EAC1-4E90-BB46-4087307708ED

    2015-07-18 11:08:36 +1000: Load and verify Freespace Summary

    2015-07-18 11:08:36 +1000: Load and verify Block Accounting

    2015-07-18 11:08:36 +1000: Load and verify Live Virtual Addresses

    2015-07-18 11:08:36 +1000: Newest transaction commit checkpoint is valid

    2015-07-18 11:08:36 +1000: Load and verify Segment Cleaning

    2015-07-18 11:08:36 +1000: The volume 47320312-D9AE-4B82-9474-52245E503607 appears to be OK

    2015-07-18 11:08:36 +1000: Storage system check exit code is 0.

    2015-07-18 11:08:36 +1000: Verifying file system.

    2015-07-18 11:08:36 +1000: Using live mode.

    2015-07-18 11:08:37 +1000: Checking Journaled HFS Plus volume.

    2015-07-18 11:08:37 +1000: Checking extents overflow file.

    2015-07-18 11:08:48 +1000: Checking catalog hierarchy.

    2015-07-18 11:08:59 +1000: Invalid directory item count

    2015-07-18 11:08:59 +1000: (It should be 33 instead of 32)

    2015-07-18 11:08:59 +1000: Invalid directory item count

    2015-07-18 11:08:59 +1000: (It should be 33 instead of 32)

    2015-07-18 11:08:59 +1000: Checking extended attributes file.

    2015-07-18 11:09:04 +1000: Checking volume bitmap.

    2015-07-18 11:09:04 +1000: File system check exit code is 8.

    2015-07-18 11:09:04 +1000: Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.

    2015-07-18 11:09:04 +1000:

     

     

    2015-07-18 11:09:04 +1000: Disk Utility stopped verifying “Macintosh HD”: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.

     

     

    2015-07-18 11:09:04 +1000:

     

     

    **********

    2015-07-18 13:15:46 +1000: Disk Utility started.

     

     

    2015-07-18 13:15:53 +1000: Verifying volume “Macintosh HD”

    2015-07-18 13:15:53 +1000: Starting verification tool:

    2015-07-18 13:15:53 +1000: Verifying storage system

    2015-07-18 13:15:53 +1000: Checking volume

    2015-07-18 13:15:53 +1000: disk0s2: Scan for Volume Headers

    2015-07-18 13:15:53 +1000: disk0s2: Scan for Disk Labels

    2015-07-18 13:15:53 +1000: Logical Volume Group 47320312-D9AE-4B82-9474-52245E503607 on 1 device

    2015-07-18 13:15:53 +1000: disk0s2: Scan for Metadata Volume

    2015-07-18 13:15:53 +1000: Logical Volume Group has a 24 MB Metadata Volume with double redundancy

    2015-07-18 13:15:53 +1000: Start scanning metadata for a valid checkpoint

    2015-07-18 13:15:53 +1000: Load and verify Segment Headers

    2015-07-18 13:15:53 +1000: Load and verify Checkpoint Payload

    2015-07-18 13:15:53 +1000: Load and verify Transaction Segment

    2015-07-18 13:15:53 +1000: Incorporate 0 newer non-checkpoint transactions

    2015-07-18 13:15:53 +1000: Load and verify Virtual Address Table

    2015-07-18 13:15:53 +1000: Load and verify Segment Usage Table

    2015-07-18 13:15:53 +1000: Load and verify Metadata Superblock

    2015-07-18 13:15:53 +1000: Load and verify Logical Volumes B-Trees

    2015-07-18 13:15:53 +1000: Logical Volume Group contains 1 Logical Volume

    2015-07-18 13:15:53 +1000: Load and verify 3F3BEB1A-5B33-4253-B3E7-E532B22B3F72

    2015-07-18 13:15:53 +1000: Load and verify 551670D3-EAC1-4E90-BB46-4087307708ED

    2015-07-18 13:15:53 +1000: Load and verify Freespace Summary

    2015-07-18 13:15:53 +1000: Load and verify Block Accounting

    2015-07-18 13:15:53 +1000: Load and verify Live Virtual Addresses

    2015-07-18 13:15:53 +1000: Newest transaction commit checkpoint is valid

    2015-07-18 13:15:53 +1000: Load and verify Segment Cleaning

    2015-07-18 13:15:53 +1000: The volume 47320312-D9AE-4B82-9474-52245E503607 appears to be OK

    2015-07-18 13:15:54 +1000: Storage system check exit code is 0.

    2015-07-18 13:15:54 +1000: Verifying file system.

    2015-07-18 13:15:54 +1000: Using live mode.

    2015-07-18 13:15:54 +1000: Performing live verification.

    2015-07-18 13:15:54 +1000: Checking Journaled HFS Plus volume.

    2015-07-18 13:15:54 +1000: Checking extents overflow file.

    2015-07-18 13:15:54 +1000: Checking catalog file.

    2015-07-18 13:16:07 +1000: Checking multi-linked files.

    2015-07-18 13:16:07 +1000: Checking catalog hierarchy.

    2015-07-18 13:16:19 +1000: Invalid directory item count

    2015-07-18 13:16:19 +1000: (It should be 33 instead of 32)

    2015-07-18 13:16:19 +1000: (It should be 33 instead of 32)

    2015-07-18 13:16:19 +1000: Checking extended attributes file.

    2015-07-18 13:16:24 +1000: Checking volume information.

    2015-07-18 13:16:24 +1000: The volume Macintosh HD was found corrupt and needs to be repaired.

    2015-07-18 13:16:24 +1000: File system check exit code is 8.

    2015-07-18 13:16:24 +1000: Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.

    2015-07-18 13:16:24 +1000:

     

     

    2015-07-18 13:16:24 +1000: Disk Utility stopped verifying “Macintosh HD”: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.

     

     

    2015-07-18 13:16:24 +1000:

     

     

    **********

    2015-07-18 13:18:52 +1000: Disk Utility started.

     

     

    2015-07-18 13:19:05 +1000: Verifying volume “Macintosh HD”

    2015-07-18 13:19:05 +1000: Starting verification tool:

    2015-07-18 13:19:05 +1000: Verifying storage system

    2015-07-18 13:19:05 +1000: Checking volume

    2015-07-18 13:19:05 +1000: disk0s2: Scan for Volume Headers

    2015-07-18 13:19:05 +1000: disk0s2: Scan for Disk Labels

    2015-07-18 13:19:05 +1000: Logical Volume Group 47320312-D9AE-4B82-9474-52245E503607 on 1 device

    2015-07-18 13:19:05 +1000: disk0s2: Scan for Metadata Volume

    2015-07-18 13:19:05 +1000: Logical Volume Group has a 24 MB Metadata Volume with double redundancy

    2015-07-18 13:19:05 +1000: Start scanning metadata for a valid checkpoint

    2015-07-18 13:19:05 +1000: Load and verify Segment Headers

    2015-07-18 13:19:05 +1000: Load and verify Checkpoint Payload

    2015-07-18 13:19:05 +1000: Load and verify Transaction Segment

    2015-07-18 13:19:05 +1000: Incorporate 0 newer non-checkpoint transactions

    2015-07-18 13:19:05 +1000: Load and verify Virtual Address Table

    2015-07-18 13:19:05 +1000: Load and verify Segment Usage Table

    2015-07-18 13:19:05 +1000: Load and verify Metadata Superblock

    2015-07-18 13:19:05 +1000: Load and verify Logical Volumes B-Trees

    2015-07-18 13:19:05 +1000: Logical Volume Group contains 1 Logical Volume

    2015-07-18 13:19:05 +1000: Load and verify 3F3BEB1A-5B33-4253-B3E7-E532B22B3F72

    2015-07-18 13:19:05 +1000: Load and verify 551670D3-EAC1-4E90-BB46-4087307708ED

    2015-07-18 13:19:05 +1000: Load and verify Freespace Summary

    2015-07-18 13:19:05 +1000: Load and verify Block Accounting

    2015-07-18 13:19:05 +1000: Load and verify Live Virtual Addresses

    2015-07-18 13:19:05 +1000: Newest transaction commit checkpoint is valid

    2015-07-18 13:19:05 +1000: Load and verify Segment Cleaning

    2015-07-18 13:19:05 +1000: The volume 47320312-D9AE-4B82-9474-52245E503607 appears to be OK

    2015-07-18 13:19:05 +1000: Storage system check exit code is 0.

    2015-07-18 13:19:05 +1000: Verifying file system.

    2015-07-18 13:19:05 +1000: Using live mode.

    2015-07-18 13:19:06 +1000: Checking extents overflow file.

    2015-07-18 13:19:06 +1000: Checking extents overflow file.

    2015-07-18 13:19:06 +1000: Checking catalog file.

    2015-07-18 13:19:16 +1000: Checking catalog hierarchy.

    2015-07-18 13:19:28 +1000: Invalid directory item count

    2015-07-18 13:19:28 +1000: (It should be 33 instead of 32)

    2015-07-18 13:19:28 +1000: (It should be 33 instead of 32)

    2015-07-18 13:19:28 +1000: Checking extended attributes file.

    2015-07-18 13:19:33 +1000: File system check exit code is 8.

    2015-07-18 13:19:33 +1000: Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.

    2015-07-18 13:19:33 +1000:

     

     

    2015-07-18 13:19:33 +1000: Disk Utility stopped verifying “Macintosh HD”: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.

     

     

    2015-07-18 13:19:33 +1000:

  • by Linc Davis,

    Linc Davis Linc Davis Jul 17, 2015 8:40 PM in response to jerrremyyy
    Level 10 (208,000 points)
    Applications
    Jul 17, 2015 8:40 PM in response to jerrremyyy
    If the computer is started up from the Mac OS X hard disk (or disk partition) and Disk Utility finds errors on it, there is not necessarily anything wrong. Only when started up from the CD [or the Recovery HD] should Disk Utility reports of errors on the Mac OS X hard disk (or disk partition) be considered accurate.

    Disk Utility incorrectly reports disk errors on startup volume

    You can probably clear the warnings by deactivating FileVault and then reactivating it, if you wish. Back up all data before making any changes.

  • by jerrremyyy,

    jerrremyyy jerrremyyy Jul 18, 2015 3:03 AM in response to Linc Davis
    Level 1 (0 points)
    Jul 18, 2015 3:03 AM in response to Linc Davis

    I bought a hard drive today, backing up everything but the encryption is taking ages...

     

    When this is finished, I will let you know if it fixed my errors. Thank you already for the help.