HT204948: Use two Mac apps side by side in Split View
Learn about Use two Mac apps side by side in Split View
-
All replies
-
Helpful answers
-
Oct 5, 2015 8:51 AM in response to m. rahimby sterling r,★HelpfulHello there m. rahim,
It sounds like you are looking to update your printer drivers because it does not seem to be working correctly after you updated to El Capitan. You can check for any available updates using the Mac App Store:
Make sure you have the latest software
If your printer doesn’t support AirPrint, make sure you have the correct version of your printer’s software (also called its printer driver).
-
If you’re using a printer that another user is sharing, make sure you’re both using the same version of the printer software. To find out which version you’re using, open Printers & Scanners preferences (choose Apple menu > System Preferences, then click Printers & Scanners). Select the printer in Printers & Scanners preferences, click Options & Supplies, then click General. Note the driver version.
-
If you’re using a network printer or a printer connected to your Mac, make sure you have the latest version of the software for the printer. If you still have problems, try different printer software for your printer.
The same link also contains printer troubleshooting in general that I would recommend that you use if there are no updates and the issue persists
Thank you for using Apple Support Communities.
-
-
Oct 5, 2015 8:53 AM in response to sterling rby m. rahim,It's very helpful. Thank you very much!....sterling r
-
-
Oct 5, 2015 2:09 PM in response to m. rahimby PAHU,Canon has released the CAPT v3.80 driver to support El Capitan. Before installing this driver it is recommended that you remove the LBP6000 from Printers & Scanners. Then open Finder and select the Go > Go to Folder menu. Then enter (or copy and paste) the following text and then press the Go button.
/Library/Printers/Canon
In this Canon folder you should see the previous CUPSCAPT folder. Trash this folder and then restart the Mac. Once you have logged back in to the Mac, run the new CAPT v3.80 driver installer and then add the LBP6000 in Printers & Scanners.
-
