-
All replies
-
Helpful answers
-
Oct 25, 2015 11:10 AM in response to oskarrlundinby BDAqua,What brand & model is the actual drive from the NAS?
-
-
Oct 25, 2015 1:06 PM in response to oskarrlundinby BDAqua,OK, it's not clear, are you pulling the drive out of the case to install the actual drive itself inside the G5, attaching it via USB, or what?
Does the Mac power on & just not boot or what?
-
Oct 25, 2015 1:28 PM in response to BDAquaby oskarrlundin,Yes i tried to connect it inside the G5 with SATA- cable.
When I press the power button it shows the apple logo for a few seconds then it turns to a blue screen. I've tried to start the mac holding the "option" key to select the right hard drive to boot from. I can not even see the other drive there.
I know that the 1 tb drive is working, but once I connect it to the mac it won't even boot. Do you think it have to do with the firmware thats running on the nas drive?
-
Oct 25, 2015 1:53 PM in response to oskarrlundinby BDAqua,So, only the NAS drives shows up when you hold option key at bootup?
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/ht1379
In fact, do 3 in a row, takes a bit of time.
-
Oct 25, 2015 2:00 PM in response to BDAquaby oskarrlundin,No sorry, i can only see Macintosh HD, which is another drive where i have os x installed.
Should i still do the PRAM reset even if i can't see the drive?
-
Oct 25, 2015 3:30 PM in response to oskarrlundinby BDAqua,Does it show up in Disk Utility?
I don't think the PRAM reset will help this, likely the drive is another format, like NTFS.
-
Oct 26, 2015 6:14 AM in response to BDAquaby oskarrlundin,No I can't see the disk in disk utility but that is because I can't boot the Mac. Is it possible to launch disk utility without booting the Mac?
-
Oct 26, 2015 10:23 AM in response to oskarrlundinby BDAqua,Oh, it doesn't even boot when connected, I wasn't clear on that for some reason... no, no way to run DU if it won't boot.
We might need to attach it with one of these to figure this out...
-
Oct 26, 2015 12:41 PM in response to BDAquaby oskarrlundin,I tried to boot the mac with the hard drive inside again (not with the cable you suggested) and i managed to boot the mac successfully but I can't see the drive in disk utility... Is there a better program to format the drive than DU?
-
Oct 26, 2015 12:55 PM in response to oskarrlundinby BDAqua,Not on Mac, maybe Windows or Linux.
If you can boot it again with it installed, open Terminal & type or paste this in & hit return, report what it says...
diskutil list
-
Oct 26, 2015 1:18 PM in response to BDAquaby oskarrlundin,#: TYPE NAME SIZE IDENTIFIER
0: Apple_partition_scheme *74.5 Gi disk0
1: Apple_partition_map 31.5 Ki disk0s1
2: Apple_HFS Macintosh HD 74.4 Gi disk0s3
user:~ user$
-