stephan (Germany)

Q: Best way to digitize vinyl.

Hello,

 

I would like to digitize my vinyl collection which consists mainly in electronic music.

 

My setup is the following:

- 2 Technics 1210 MK2

- Ortofon Concorde DJ E Cartridges (Frequency range at -3dB  -  20-22.000 Hz, Frequency response -   20-20.000 Hz +/-2 dB)

- Pioneer DJM-500 mixer

- Mac Pro 2010 (2x12core, 32Gb RAM, ...)

- VinylStudio V8.8

 

I started with some test recordings by simply connecting my mixer to the line in at my Mac Pro and recording WAV at 24bit and 96kHz. I am in doubt about two areas: Cartridges and how to connect my turntable to my Mac Pro. Obviously this is the place to ask the later.

 

Can I keep my setting or should I get an external Audiointerface instead of using the line in? I read on other forums that some people have to buy amps, usb-turntables, etc., but since I already have a very good mixer and turntable I was wondering if I need a Phonopreamp/analog-digital converter (ADC)?

 

I hope someone can give me a hand!

Mac Pro, OS X El Capitan (10.11), Server 5.0.4

Posted on Jan 2, 2016 3:27 PM

Close

Q: Best way to digitize vinyl.

  • All replies
  • Helpful answers

  • by Studio X,

    Studio X Studio X Jan 10, 2016 1:43 PM in response to stephan (Germany)
    Level 7 (27,059 points)
    Jan 10, 2016 1:43 PM in response to stephan (Germany)

    You didn't tell us how the experiment worked?

     

    If it was acceptable, be happy.

     

    If the audio levels were way low, you'll need a pre-amp to boost the phonograph's signal.

     

    If the audio is noisy, you'll need a third party Analog/Digital converter.

     

    I transfer my vinyl records this way -

    Turntable > Amplifier with phono preset (aka phono preamp) > line out > Mackie Onyx 1220i firewire mixer (which acts as Analog/Digital converter) > firewire 400 > MacPro.

     

    This works for a much cleaner sound for two reasons - first, the turntable signal is boosted through a dedicated pre-amp circuit and second, the A/D conversion is being handled by the Mackie, which does a greatly superior job compared to Apple's noisy onboard A/D converter.

     

    Good luck.

    x