SigLabhart

Q: After updated to 7.6.7 on Airport Express, can't print

I am using an airport express to connect our Konica Minolta C368 to our network.  Up until this morning we were able to flawlessly print to this MFP.  I updated the firmware to 7.6.7 and now we can't print at all.  This is a windows shop.  How do I downgrade in a windows environment?  Thanks in advance...  Sig

Windows 2012 R2, Other OS, Windows 2012 R2

Posted on Jun 8, 2016 12:49 PM

Close

Q: After updated to 7.6.7 on Airport Express, can't print

  • All replies
  • Helpful answers

  • by Tesserax,Apple recommended

    Tesserax Tesserax Jun 8, 2016 1:29 PM in response to SigLabhart
    Level 9 (54,427 points)
    Wireless
    Jun 8, 2016 1:29 PM in response to SigLabhart
    • Open AirPort Utility for Windows.
    • Select the base station, and then, from the utility's menu bar, select Base Station > Upload Firmware...

     

    CapturFiles.png

     

    • Click on the Upload Version dialog box where the current firmware version is listed.
    • You should now see a list of all firmware versions that are available.
    • Click on the one you want to downgrade to.
    • Choose either "Continue" to continue with the downgrade OR choose "Cancel" if you decide not to.
    • If you choose to continue, allow the firmware to be downloaded, installed, and for the base station to restart.


    (ref: Apple Support: All about Time Capsule, AirPort Extreme, and AirPort Express base station firmware updates)