gabriel3374
Level 1
(1 points)
Q: Cannot erase USB flash drive, "name invalid"
Now, I'll just give the short version of how my problem occurred, continued with a detailed "backstory".
- Tried creating bootable USB flash drive with Windows 7.iso on it (kinda worked)
- Boot Camp requires flash drive to be formatted "as single FAT partition"
- Disk Utility -> Erase -> Error: "Invalid name. Operation failed..."
- Terminal -> diskutil reformat /dev/disk2 -> Same Error
Hardware details
- MacBook Pro Mid 2010 with OS X El Capitan
- 32GB SanDisk 3.0 USB flash drive. I had previously installed Linux Mint on it, which worked perfectly.
What I've done to the USB flash drive
For university we could download different versions of Windows for free. So now with a .iso file in my downloads folder I tried creating a bootable USB flash drive using the instructions provided by Ubuntu, because for some reason I found nothing helpful for Windows and figured the commands in terminal wouldn't be much different.
- Convert .iso to .img: hdiutil convert -format UDRW -o /Users/me/Downloads/Windows_7.img /Users/me/Downloads/Windows\ 7\ Professional\ N\ with\ Service\ Pack\ 1\ \(x64\)\ -\ DVD\ \(German\)/windows_7.iso
- Unmount my disk: diskutil unmountDisk /dev/disk2
- Initialise (?) disk: sudo dd if=/Users/me/Downloads/Windows_7.img of=/dev/rdisk2 bs=1m
- Eject: diskutil eject /dev/disk2
I remember when doing this for Ubuntu, starting up the computer while holding the option key would already give me the option to boot from that flash drive. Sadly didn't work here (only showed my Macintosh as the only option on startup), so I tried using Boot Camp.
What Boot Camp told me
I start Boot Camp, skip "Introduction", on page two I select both the options "Download the latest Windows support software from Apple" and "Install Windows 7 or later version". On another tutorial website I looked up, it showed an extra option to "Create a Windows 7 or later install disk", an option I didn't have.
Note, if I do not select the "Download Windows support software" checkbox, I can't continue because the "Installer Disk cannot be found".
With both checkboxes checked, Continue, it says "Save Windows Support Software" and wants me to select a destination disk. I select my USB flash drive and Boot Camp tells me to reformat my USB flash drive.
What Disk Utility told me
Basic procedure, I thought. Open up Disk Utility -> Select my Flash drive -> "Erase" -> New name, format, "Erase" -> Operation failed.
Come to think of it, "GSP1RMCNPRXFRER_DE_DVD" is quiet a strange name, but that shouldn't be the reason not to reformat it, right? Giving it another name also wouldn't work. I can't rename the device itself on my desktop either. Using another format like "ExFAT" won't work, too. Using the command diskutil reformat /dev/disk2 in terminal gives me a "Name invalid" error, too.
If it's in anyway helpful, that's what the inside of my allegedly bootable flash drive looks like.
Loner T
Level 7
(23,898 points)
1. Why are you not using Bootcamp Assistant to install Windows 7?
2. The USB must be formatted as a MSDOS-FAT in Disk Utility, but a 2010 Mac cannot boot from a USB anyway, so this effort is not helpful.
3. Your Mac 2010 requires a physical DVD to install Windows 7. If you obtained an ISO from Microsoft, burn it to a DVD-R SL disk. Please ensure you use either 64-bit or 32-bit ISO. You cannot use a mixed-mode ISO.
4. Your screen shot OSX Extended Journaled. This cannot be used to install Windows. It must be a bootable DVD for your specific model.
5, Installation of Windows is very well documented in the following.
Install Windows 7 and earlier on your Mac using Boot Camp - Apple Support
