Q: Windows 10 Sound Not Working.

Question

xlegoheadx

Level 1 (5 points)

Windows Software

Q: Windows 10 Sound Not Working.

I finally was able to successfully install Windows 10 on My iMac Late 2011 21.5 inch. Everything is working fine, the keyboard and everything, BUT THERE IS NO SOUND, yes, I have installed the latest Boot Camp Drivers to my USB and repaired/installed them multiple times, YES, I have the latest OSX right now, what else can I do this is very frustrating everytime I press the volume buttons they give me Circle with a line thru it symbol and I can't do anything about it, Please help, I will provide any information necessary.

iMac, OS X El Capitan (10.11.6)

Posted on Sep 7, 2016 6:37 PM

I have this question too

Solved

Loner T

Level 7 (23,633 points)

Safari

A:

You 2011 Mac does not officially support Windows 10. However, you can upgrade from W7/W8.1 to W10. It preserves the BIOS/MBR installation that is necessary for Sound to work.

Please also see No Sound after installing windows 10 on MBP 2012 .

Posted on Sep 8, 2016 4:40 AM

Q: Windows 10 Sound Not Working.

All replies

Helpful answers

Page 1

by xlegoheadx,

xlegoheadx Sep 8, 2016 4:19 AM in response to Loner T
Level 1 (5 points)

Windows Software

Sep 8, 2016 4:19 AM in response to Loner T

Thanks for the reply! So basically I should delete this windows 10 partition, then make another one with a Windows 8 iso, after I install the windows 8, I should then upgrade to Windows 10 within 8 right? and I will then have sound?
Reply options

Link to this post

by Loner T,Helpful

Loner T Sep 8, 2016 5:09 AM in response to xlegoheadx
Level 7 (23,633 points)

Safari

Sep 8, 2016 5:09 AM in response to xlegoheadx

Please ensure that you do not use EFI boot to install W7/W8.1.
Reply options

Link to this post

by xlegoheadx,

xlegoheadx Sep 8, 2016 5:10 AM in response to Loner T
Level 1 (5 points)

Windows Software

Sep 8, 2016 5:10 AM in response to Loner T

I'm a bit confused... When you say don't use EFI boot , do you mean that I can't use a USB to install it?
Reply options

Link to this post

by Loner T,

Loner T Sep 8, 2016 5:17 AM in response to xlegoheadx
Level 7 (23,633 points)

Safari

Sep 8, 2016 5:17 AM in response to xlegoheadx

On 2011 Mac, if you use a USB, it does not support MBR-boot properly, but does support EFI Boot. If you use EFI boot, you cannot see Audio devices.

If you use a physical DVD, the 2011 Macs will do the right thing, if BC Assistant is followed and no manual intervention is used.
Reply options

Link to this post

by xlegoheadx,

xlegoheadx Sep 8, 2016 5:21 AM in response to Loner T
Level 1 (5 points)

Windows Software

Sep 8, 2016 5:21 AM in response to Loner T

I only have a physical disk for Windows vista though, Will I still be able to upgrade using that?
Reply options

Link to this post

by Loner T,

Loner T Sep 8, 2016 9:42 AM in response to xlegoheadx
Level 7 (23,633 points)

Safari

Sep 8, 2016 9:42 AM in response to xlegoheadx

Vista will not work as stated in this link. You can upgrade Vista to W7 and then upgrade to W10.
Latest OS: Make sure you are running the latest version of either Windows 7 SP1 or Windows 8.1 Update. Don’t know which version you are running? Check here to find out. Need to download the latest version? Click here for Windows 7 SP1or Windows 8.1 Update.
Reply options

Link to this post

by xlegoheadx,

xlegoheadx Sep 8, 2016 11:54 AM in response to Loner T
Level 1 (5 points)

Windows Software

Sep 8, 2016 11:54 AM in response to Loner T

Ok, thank you for the support Loner T, I really appreciate it, that will be all!
Reply options

Link to this post

by Loner T,

Loner T Sep 8, 2016 12:51 PM in response to xlegoheadx
Level 7 (23,633 points)

Safari

Sep 8, 2016 12:51 PM in response to xlegoheadx

Please post back, if you run into any further issues.
Reply options

Link to this post

by xlegoheadx,

xlegoheadx Sep 9, 2016 6:30 PM in response to Loner T
Level 1 (5 points)

Windows Software

Sep 9, 2016 6:30 PM in response to Loner T

Hi, I'm back and I successfully installed Windows Vista on my iMac using the physical dvd that I have, but there is no sound, and i cant connect to my wifi either, I looked for the Windows vista 32 bit bootcamp drivers, and i tried to install them but they wouldnt open, I'm stuck now because I can't connect to wifi to upgrade this windows vista to 7. Please help, thanks!
Reply options

Link to this post

by Loner T,

Loner T Sep 9, 2016 7:01 PM in response to xlegoheadx
Level 7 (23,633 points)

Safari

Sep 9, 2016 7:01 PM in response to xlegoheadx

Your iMac needs 64-bit drivers. Can you try Boot Camp - Windows Vista 64 Update 2.1 ? Download this from the OS X side to a USB, and then boot into Windows and run the exe file.
Reply options

Link to this post

by xlegoheadx,

xlegoheadx Sep 9, 2016 7:55 PM in response to Loner T
Level 1 (5 points)

Windows Software

Sep 9, 2016 7:55 PM in response to Loner T

This version of windows vista is 32bit, thats why i downloaded the 32 bit version Boot Camp - Windows Vista 32 Update 2.1, i just tried to install the 64bit drivers but i got the error, that "the version of this file is not compatible with the version you're running." On the case of this install dvd it says *includes 32-bit software, I will try to open the 32 bit drivers again. edit // just tried to open it again, didnt open at all.
Reply options

Link to this post

by Loner T,

Loner T Sep 10, 2016 4:28 AM in response to xlegoheadx
Level 7 (23,633 points)

Safari

Sep 10, 2016 4:28 AM in response to xlegoheadx

What is the error you get when you try to execute the 32-bit drivers? Was it downloaded using a wireless connection from Apple? Does the ethernet connection on the back of your iMac work in Windows?
Reply options

Link to this post

by xlegoheadx,

xlegoheadx Sep 10, 2016 8:11 AM in response to Loner T
Level 1 (5 points)

Windows Software

Sep 10, 2016 8:11 AM in response to Loner T

When i try to execute the 32bit drivers, no error, it just doesnt open at all, nothing happens. I downloaded it on my seperate macbook air, then put it on the USB. I haven't tried to use an ethernet cable on my iMac on windows, but i'm thinking that burning Windows 10 iso to a blank dvd would work fine, would it? edit // I also forgot to mention that I used a Windows Anytime Upgrade disc to install Windows Vista
Reply options

Link to this post

Page 1

Accepted Answer · Sep 8, 2016 4:40 AM

Loner T

Level 7 (23,633 points)

Safari

Sep 8, 2016 4:40 AM in response to xlegoheadx

You 2011 Mac does not officially support Windows 10. However, you can upgrade from W7/W8.1 to W10. It preserves the BIOS/MBR installation that is necessary for Sound to work.

Please also see No Sound after installing windows 10 on MBP 2012 .

Q: Windows 10 Sound Not Working.

All replies Helpful answers

by Loner T,Solvedanswer

by xlegoheadx,

by Loner T,★Helpful

by xlegoheadx,

by Loner T,

by xlegoheadx,

by Loner T,

by xlegoheadx,

by Loner T,

by xlegoheadx,

by Loner T,

by xlegoheadx,

by Loner T,

by xlegoheadx,

All replies

Helpful answers

by Loner T,Helpful