This discussion is archived
1108 Views 16 Replies Latest reply: Jan 18, 2007 12:46 PM by Charliie
Currently Being ModeratedJan 20, 2006 7:07 PM (in response to Christopher GM Powers)No - I still am having the iDisk quota issue..over the past 2 days. I published one site successfully and then started having this problem. I have plenty of space, so I know that's not the issue...emac, Mac OS X (10.4.3)
Currently Being ModeratedJan 20, 2006 7:30 PM (in response to Christopher GM Powers)Hi Chris,
seems that we have published the same issue in parallel! I am currently trying to execute 'Save to Folder' on my local disk and then copy the whole folder manually to .Mac. I am pretty sure that the smallest connection problem while doing it directly would cause an interruption. I have almost given up.
I let you know whether the bypass via my local disk would work instantly. But it seems, that even the creation of my sites on the local drive takes an hour or so (G4 800 MHz, time to upgrade!).
Keep you posted on the development!iMac 17 Superdrive, Mac OS X (10.4.3)
Currently Being ModeratedJan 30, 2006 6:39 AM (in response to Christopher GM Powers)I am having this same problem.
Keep getting the There was an error reading your iDisk quota error when trying to upload to .mac from iweb
Can anyone find a solution??
I have more than enough memory on .mac, apple was no helppowebook g4, Mac OS X (10.4.4)
Currently Being ModeratedJan 30, 2006 6:21 PM (in response to erdoc123)I too am having the same problem, I tried moving the domain file within iWeb to another Mac. Tried publishing with that Mac and same problem happened.12 Powerbook G4, Mac mini 1.42ghz, Mac OS X (10.4.4)
Currently Being ModeratedJan 30, 2006 6:44 PM (in response to Christopher GM Powers)This problem has been solved for many people. Please visit this thread and follow the instructions given. It worked for me.
Currently Being ModeratedJan 31, 2006 2:32 AM (in response to Jerry Koontz)i tried everything on the above listed thread, and still didn't work. i published successfully in the US, but since returning to europe, kept getting that error message. not sure if that has anything to do with it.ibook 12" 768mb; imac 17" 1gb; shuffle; gen-5 ipod, Mac OS X (10.4.4)
Currently Being ModeratedJan 31, 2006 6:40 AM (in response to vincas)update:
i tried to update my web page from my university's much faster internet connection than DSL at home - and it worked fine. maybe internet connection speed has somethng to do with it...? i'll check to see what settings are different on my laptop compared to the imac at home and will report.ibook 12" 768mb; imac 17" 1gb; shuffle; gen-5 ipod, Mac OS X (10.4.4)
Currently Being ModeratedJan 31, 2006 12:44 PM (in response to vincas)update #2
back at home on my imac, i turned off my web proxy server, and things worked much better, but not perfectly... i got my site to publish, though there still were some strange errors with some of my photos. -vinceibook 12" 768mb; imac 17" 1gb; shuffle; gen-5 ipod, Mac OS X (10.4.4)
Currently Being ModeratedMay 23, 2006 10:15 AM (in response to Christopher GM Powers)I am having the same problem with my fresh MacBook Pro. Never used iWeb before... I created a website, i wanted to upload it but all my attempts failed.
I always get an error saying "cannot read your quota" or a mor precise error like "couldn't upload the file xxx" (xhere xxx is always a different file from different site).
I tried your solution twice, it didn't work. I have about 300Mo to upload (pictures), i will, again, try now and tell you if it is OK. But i doubt, and this is crazy!MacBook Pro 15'' 2.16Ghz 2Gb RAM, Mac OS X (10.4.6), iPod 5G 60Gb white
Currently Being ModeratedOct 6, 2006 10:26 AM (in response to arnoz)I've got the same problem! It works to upload from my Powerbook, but when I try to upload from my iMac it always fails. Anybody got a fix (but none of the copy-temp-folder-nonsense).Powerbook G4 & iMac, Mac OS X (10.4.7)
When publishing to .Mac, you may encounter the following error message:
Publish Error: There was an error reading your iDisk quota.
To avoid this, download and install iWeb 1.1.1 or later.
If you are still experiencing this error after updating to iWeb 1.1.1, follow these steps to resolve this issue:
Quit iWeb if it is open.
In the Finder, choose Go > Go to Folder.
Type (or copy and paste) ~/Library/Application Support/iWeb into the field and click Go. You should now see a file named Domain. This is a Mac OS X package file.
Note: If you have moved your Domain file to a different location, open the folder containing your Domain file instead.
To open the package, Control-click on the Domain package file.
Note: If you have a two-button mouse, this step can be accomplished by right-clicking the Domain package file.
Choose Show Package Contents from the pop-up menu.
A new window titled Domain will appear showing the contents of the package. Here you will see one file (or possibly two files) named "assets.[membername].groups.[groupname].plist" or "assets.[membername].plist" where [membername] and [groupname] correspond to your .Mac member name and .Mac Group name.
Note: Your .Mac member name is the first part of your .Mac email address, before "@mac.com."
If you have either or both of these files, drag them to the Trash. Then close the Domain window.
Open iWeb and try publishing again.Powerbook G4 & iMac, Mac OS X (10.4.7)
Currently Being ModeratedOct 20, 2006 5:41 AM (in response to DDdaviking)it still doesnt freaking work! i get the same error over and over again, this is the second time this has happened, i wish i wouldnt have agreed to do a website for something important, is there anyone out there who has a solution that works?
josh in michiganmacbookpro, Mac OS X (10.4.8)