This discussion is archived
43083 Views 6 Replies Latest reply: Jan 28, 2011 10:59 AM by peeber
Currently Being ModeratedJan 28, 2011 10:58 AM (in response to nzeaglei)Hi,
I'm not an expert on this as I'm still using a standard definition Sony widescreen TV with my Mac Mini.
The Mini should support 1360x768 (check the specs on Apple's site). Doing a quick google, Amazon actually have a link from that TV on how to use Front Row. I think you'll be okay.
http://www.amazon.co.uk/Samsung-LE26R74BDX-Ready-LCD-Freeview/dp/B000F4TC32Mac Book Pro 15", 1.83GHz, 2GB, 100GB 7200rpm, Mac OS X (10.4.10), Mac Mini, 1.66GHz, 2GB
Currently Being ModeratedJan 28, 2011 10:58 AM (in response to Dai Bach)Hi
Well picked it up yesterday, plugged eveything in and then turned her, on, got 1360x768 straight away, no configuration required. It can also run at 1024x768 as well I think or something similar, but why use that if I have 1360x768!?
I have joined the mac world, took about 4 hours to download all the updates to programs though! next probl;em is getting the networking sorted...Acer 5021WLMi, Windows XP, iPod Photo 30Gb, iPod Nano 2Gb
Currently Being ModeratedJan 28, 2011 10:58 AM (in response to nzeaglei)Congratulations and welcome to the Mac world!
Post back if you get any problems.
Oh, and change your signature - you're a Mac user now!Mac Book Pro 15", 1.83GHz, 2GB, 100GB 7200rpm, Mac OS X (10.4.10), Mac Mini, 1.66GHz, 2GB
Currently Being ModeratedJan 28, 2011 10:59 AM (in response to Dai Bach)Thanks and sig done!
Other than networking, I am also going to have to think about how to store all my media now, its photos and music, no video yet, but thats another question...
Mac Mini 1.66Ghz, 1.5Gb, 80Gb Mac OS X (10.4.10) iPod Photo 30Gb, iPod Nano 2Gb, Acer 5021WLMi Windows XP
Currently Being ModeratedJan 28, 2011 10:58 AM (in response to nzeaglei)I obviously have not tried every make and model of TV but my experience is as follows.
1. Connecting a computer (including a Mac mini) to a TV which does 1366x768 or similar via VGA will typically work automatically and with no fiddling.
2. Connecting a computer (including a Mac mini) to a TV which does 1366x768 or similar via DVI to HDMI will work but will not fill the screen and may not be 1366x768 pixels, it is more likely to be 1280x720.
This is because most/all TVs do not via HDMI properly advertise their resolution using EID.
For Windows, ATI and Nvidia allow some customisation in their video card settings to get round this and the third-party utility called PowerStrip (for ATI and Nvidia cards only) is even better.
For Macs, there is DisplayConfigX and SwitchResX both of which do at least partially work with the Intel GMA 950 in a Mac mini. However even with these I did not get perfect results via DVI to HDMI.
Note: I found that the image quality via VGA was noticeably worse than via DVI, you could see the pixels 'crawling'. This was with a Sony Bravia 40" TV.
I believe (and hope) that with a 1920x1080 TV that these problems should not occur as the computer resolution is then identical to the TV resolution (unlike 720p which is typically 1280x720 from a computer point of view whereas for some reason all TVs are more like 1366x768).PowerBook G4, Mac OS X (10.4.10)
Currently Being ModeratedJan 28, 2011 10:59 AM (in response to nzeaglei)Using Samsung TV with Mac mini myself. Later model though, LE26R88BD. If yours has HDMI enabled for PC(ugh) use it. You need a DVI to HDMI cable but it's worth it! This is MUCH better than VGA input. You get choice of resolutions. Best is 1360x768 (matches pixels exactly) gives super-sharp clear picture. It will support 1920x1080 but you must set Size to Just Scan on the TV to see the whole desktop and it's not quite as sharp, but loads of room! Hope this helps.Mac mini, Mac OS X (10.4.10), Samsung LE26R88BD