This discussion is archived
11025 Views 28 Replies Latest reply: Nov 4, 2007 4:06 PM by nepmol
Currently Being ModeratedOct 27, 2007 3:34 PM (in response to TimJim1037)I successfully updated a single-drive backup, recreated my RAID with the newer Disk Utility, and restored onto the RAID using Carbon Copy Cloner. Looks like the old version RAID is the problem.MacPro, Mac OS X (10.5)
Currently Being ModeratedOct 27, 2007 3:46 PM (in response to infobhan)Installed it on my tower and Imac, but I get the same "cannot install on this computer" when trying to install it on a Pismo I had upgraded to a G4.
Any ideas about my problem?G3 Pismo (upgraded to a G4) & G5 Tower & Intel imac, Mac OS X (10.4.10)
Currently Being ModeratedOct 27, 2007 3:58 PM (in response to Sonny Lykos)I have had a SATURDAY FROM ****. Installed on my boss' boyfriends' MBP 2.16GHz machine and Leopard gave me that message, and when I tried to get out of the install taking out the Leopard DVD, I got a restarted mac that wouldnt even show an Apple logo---i got a file with a question mark.
(NOW I know that this means I should reinstall Tiger here)
Then I tried restarting the Leopard install, ran disk check (saw everything was fine) but I got the message again and stupidly clicked "erase and install" thinking it would erase a partion of the disk that contains the Tiger OS.
So now the install went ok but then once it started acting like a macbook pro that is fresh from the market (i.e. Welcome movie), I knew I just erased EVERYTHING on my boss' computer.
Thank God for Boomerang Data Recovery, I was able to restore pdfs, but not Microsoft Word docs or Excel docs----these are all jibberish. I called my boss to let him know and was of course returning my message with utter shock.
Thank you Apple for letting us clearly know that in order to install Leopard correctly and safely YOU MUST remove non-apple ram from the computer!PowerMac G5 2.3 GHZ, Mac OS X (10.4.3), MBP, G5
Currently Being ModeratedOct 27, 2007 4:10 PM (in response to nerowolfe)That's because disk format is not a system requirement - i.e. you don't have to buy hardware to fix it.MacBook Pro, Mac OS X (10.5)
Currently Being ModeratedOct 28, 2007 3:05 PM (in response to TimJim1037)About the *yellow exclamation mark* problem ...
I have succeeded in solving this problem without having to do any backup.
But this involves correcting hexadecimal values in the GPT (first deleting other entries than EFI and the HFS+ partition of Tiger, then calculating two checksums, in order these changes are not replaced by the GPT backup).
And after installation of Leopard, rewriting the original GPT (to get access back to all your partitions)
Basically, the installer seems to support GUID partition tables with :
+ either just one HFS+ partition, with any size, it does not matter if it does not fit on 100% of the disk
+ or two partitions, a HFS+ one and a "Basic Data" one (that can be FAT32/NTFS for Windows or ext3/reiserfs/jfs/whatever for Linux) but in this case, the installer absolutely wants that the sum of both equals 100% of the disk.
I came to these conclusions because in my case, I had three partitions :
+ the HFS+ one
+ an ext3 one (described as "Basic data" by the GPT)
+ a Linux swap one
= 100% of the disk
First I tried to make something that is not data-destructive : delete the Linux swap. I was thinking it would work because the installer would see an HFS+ one and a "Basic Data" one (and would think I have a Boot Camp/Windows installation)
But it did not worked, because HFS+ plus Basic Data does not fit the whole disk (Bootcamp partitioner partitions disks like this)
I could have chosen to resize, extend the ext3 one in order that all the disk but I did not think about it.
So my solution was finally what I have said earlier : to edit the GPT to make the installer believe there is just a HFS+ partition (and empty space instead of Linux/Linux swap partitions) then after the installation, to restore the GPT to its full extent.
I may post a page with a HOW TO of my method in the coming few hours or few days (I made my hack under Linux, but it is doable under Mac OS X)
But in all cases, this is the presence of another partition, that the installer doesn't like, that is causing you the yellow exclamation mark problem. So if you can delete it, you can solve it without my method or the "obligatory" backup.
Message was edited by: inderweltseiniMac Core Duo 17", Mac OS X (10.5)
Currently Being ModeratedOct 29, 2007 2:32 PM (in response to inderweltsein)I have the same problem with the yellow exclamation mark and the "You cannot install Mac OS X on this volume".
I've checked some things:
- GUID Partition Table: ok
- Partition scheme: just one single partition Macintosh HD, Mac OS Extended (Journaled) 111,5 GB, 55,4 GB available
I bought this macbook pro from a apple store and did not alter any of the settings.
I do have Parallels installed with two virtual machines: Windows XP and Ubuntu 7.10
Any help?MacBook Pro, Mac OS X (10.4.10)
Currently Being ModeratedOct 29, 2007 8:34 PM (in response to nepmol)I have the same exact problem and setup as above, please help!MacBook Pro, Mac OS X (10.4.10)
Currently Being ModeratedOct 29, 2007 9:59 PM (in response to tombec)i'm having the same problem as well.Mac OS X (10.4.10)
Currently Being ModeratedOct 30, 2007 1:34 AM (in response to mpelle)any of you guys running Tech tools pro 4 or have the HD partitioned with an e-drive, 'cus that'll cause this problem!!!!!iMac Intel 20" & Titanium G4 Powerbook, Mac OS X (10.4.10)
Currently Being ModeratedOct 30, 2007 1:36 AM (in response to dawnrazor)Sorry I should mention, that you need to remove the e-drive using the original TTP4 disc before you can go any further unless you want to erase and install.iMac Intel 20" & Titanium G4 Powerbook, Mac OS X (10.4.10)
Currently Being ModeratedNov 1, 2007 1:55 PM (in response to TimJim1037)I noticed a strange this with this.
When I verify my disk using the disk utility on the Leopard dvd it gave some errors:
* Incorrect number of Extended Attributes (it should be 0 in stead of 2347)
* Volume header needs minor repair
* The volumen Macintosh HD nees to be repaired
* ERROR: filesystem verify or repair failed
So, I could not repair this with the Leopard DVD
When I used my Tiger 10.4.10 CD and ran verify disk, it gave no errors at all!
Also running verify disk after normal boot gave no errors.
Weird, isn't it?
Anybody a clue?MacBook Pro, Mac OS X (10.4.10)
Currently Being ModeratedNov 4, 2007 11:44 AM (in response to nepmol)This is precisely the issue I have encountered - you're not alone in this.
Running the 10.4 Disk Utility repair found zero errors.
Running the Disk Utility on the Leopard install disk it produces this same message you note.
I have not been successful using any of the standard tools to make the necessary repairs. Reformatting the drive seems like overkill.
Worth noting that I have two other Macs - iMac and MacBook - both of which were upgraded without issue.iMac, Mac OS X (10.4.10), Upgrading to Leopard
Currently Being ModeratedNov 4, 2007 12:50 PM (in response to TimJim1037)Thankx Tony,
You solved my problem installing Leopard! I had to repartition etc.
Thx again, gary17" MacBook Pro 2.16/120/2gb ram, Mac OS X (10.5), Mac Pro 2.66, 250 & 80gb hdd, 2 DL-SD, 7gn ram, APX & BT
Currently Being ModeratedNov 4, 2007 4:06 PM (in response to TimJim1037)What eventually worked for me was running DiskWarrior!
hope you are succesful as wellMacBook Pro, Mac OS X (10.4.10)