Skip navigation
This discussion is archived

eSATA PCI card

5739 Views 23 Replies Latest reply: May 14, 2009 3:19 PM by mbean RSS
1 2 Previous Next
Thomas Matheu Level 1 Level 1 (5 points)
Currently Being Moderated
Jan 31, 2009 5:18 PM
I am looking for a PCI card for my MacPro Quad core. I do not need RAID, just the ability to connect eSATA external drives. One or two sockets will do.

I have only found cards for use with Windows or Linux.

Any recommendations?
MacPro Quad core, Mac OS X (10.4.11)
  • mbean Level 4 Level 4 (1,250 points)
    Currently Being Moderated
    Jan 31, 2009 6:59 PM (in response to Thomas Matheu)
    I am looking for a PCI card for my MacPro Quad core. I do not need RAID, just the ability to connect eSATA external drives. One or two sockets will do.


    Hi,
    The FirmTek SeriTek/2SE2-E is a good choice for the Mac Pro. It supports direct connect, port multipler and can be used with Boot Camp as well.

    http://firmtek.stores.yahoo.net/sata2es2e.html

    Happy hunting!
    Mac Pro 2.8, Mac OS X (10.5.6)
  • randman Calculating status...
    Currently Being Moderated
    Jan 31, 2009 11:13 PM (in response to mbean)
    Does it support booting from an external drive? How about SMART status?
    Mac Pro (Early 2008), Mac OS X (10.5.4)
  • mbean Level 4 Level 4 (1,250 points)
    Currently Being Moderated
    Feb 1, 2009 4:41 AM (in response to randman)
    Does it support booting from an external drive? How about SMART status?


    None of the inexpensive eSATA two-port cards for the Mac Pro support booting including the SeriTek/2SE2-E. This is not a big deal as the Mac Pro has four internal bays that the user can boot from. The external eSATA ports are used for additional storage.

    The SeriTek/2SE2-E card will display the SMART status of the HDs attached to the card in Disk Utility.

    If you want external boot capability you can mount a SATA cable on one of the extra internal SATA ports and bring that cable out through the PCI bay. A HD connected to this SATA cable will boot. However, it will not be hot swappable like a HD on the SeriTek/2SE2-E. What this means is that every time you turn the external HD on you will need to restart the computer as the Apple bus will not see the HD until a restart occurs.

    I like the SeriTek/2SE2-E as I can dismount one HD and add another without restarting the computer. I already have four bootable bays internally on the Mac Pro and I just want the external eSATA port to be hot swappable.

    Have fun!
    Mac Pro 2.8, Mac OS X (10.5.6)
  • randman Level 1 Level 1 (0 points)
    Currently Being Moderated
    Feb 1, 2009 9:21 AM (in response to mbean)
    Thanks for the info. I've thought of using the hidden ports but doing so seems to be a lot of trouble, and I read it won't work with Windows (not to mention it's not hot swappable). I'm using all 4 hard drive bays (1 for boot drive and apps and 3 in a software RAID).

    I do have a Firewire drive for emergency booting purposes so I suppose I can eSata for Time Machine. For that, I can use a cheap eSata card.

    BTW, are there more expensive cards that support boot, SMART status, hot swappable and port multiplier? If so any recommendations? Last time I did research on this, I couldn't find one.

    Thanks.
    Mac Pro (Early 2008), Mac OS X (10.5.4)
  • The hatter Level 9 Level 9 (58,535 points)
    Currently Being Moderated
    Feb 1, 2009 9:59 AM (in response to randman)
    A pair of tweezers or needle nose pliers - no disassembly required - to put a cable on ODD ports. I had more trouble routing up to optical drive bay, so I went out the back with NewerTech kit.
    Mac Pro Windows 7 9800GTX 4 x WD Caviar 640, Vista 64-bit ACD 23" Sonnet Tempo E4P APC RS1500
  • mbean Level 4 Level 4 (1,250 points)
    Currently Being Moderated
    Feb 1, 2009 3:32 PM (in response to randman)
    BTW, are there more expensive cards that support boot, SMART status, hot swappable and port multiplier? If so any recommendations? Last time I did research on this, I couldn't find one.


    Hi,
    HighPoint claims that the RocketRAID 3122 is bootable with a new EFI that is available. It will work with SMART via its web browser but not with Disk Utility or SMART applications and you will need to use a web browser to configure it. I have been hesitant to recommend it as the two ports line up tight on the Mac Pro which makes it hard to connect both ports.

    Personally, I prefer the SeriTek/2SE2-E.

    Happy hunting!
    Mac Pro 2.8, Mac OS X (10.5.6)
  • The hatter Level 9 Level 9 (58,535 points)
    Currently Being Moderated
    Feb 2, 2009 9:52 AM (in response to Thomas Matheu)
    Most use and need Silicon Image chipset and driver.

    OWC is your best place to look.

    If all you want is SATA, then by all means forget about USB/FW cases that also include an eSATA port.

    If you don't mind "on all the time" then do use the ODD port(s). Otherwise, except to spend $ for Sonnet, etc.
    Mac Pro Windows 7 9800GTX 4 x WD Caviar 640, Vista 64-bit ACD 23" Sonnet Tempo E4P APC RS1500
  • sjøgren Level 1 Level 1 (55 points)
    Currently Being Moderated
    Feb 4, 2009 6:03 PM (in response to Thomas Matheu)
    Check this.

    http://www.sonnettech.com/product/esataextendercable.html

    The Mac pro have 2 SATA spare slots on the motherboard. You just need a extender cable to fit it on the back of your Mac pro.
    Sonnet makes a solution but you can also get any other brand. Cheap one for PC. Same thing
    MBP 15" Penryn - MB Alu - Mac Pro 08 - PB 17" - iPhone 1G, Mac OS X (10.5.6)
  • sjøgren Level 1 Level 1 (55 points)
    Currently Being Moderated
    Feb 4, 2009 6:05 PM (in response to Thomas Matheu)
    Here.

    Get one of these. http://www.sonnettech.com/product/esataextendercable.html

    The Mac Pro have 2 free SATA slots on the motherboard.. Enjoy
    MBP 15" Penryn - MB Alu - Mac Pro 08 - PB 17" - iPhone 1G, Mac OS X (10.5.6)
  • sjøgren Level 1 Level 1 (55 points)
    Currently Being Moderated
    Feb 4, 2009 6:07 PM (in response to sjøgren)
    Ups.. double post.

    I didn't thought my first post was saved.. Sorry about that guys.
    MBP 15" Penryn - MB Alu - Mac Pro 08 - PB 17" - iPhone 1G, Mac OS X (10.5.6)
  • Network 23 Level 6 Level 6 (11,500 points)
    Currently Being Moderated
    Feb 5, 2009 9:34 PM (in response to Thomas Matheu)
    Thomas Matheu wrote:
    I am looking for a PCI card for my MacPro Quad core. I do not need RAID, just the ability to connect eSATA external drives. One or two sockets will do.


    I am using this card in my quad 2.66. It's working fine. Had a kernel panic early on, but downloaded a Sonnet driver update and the machine is back to its normal mode of never seeing a kernel panic. The primary function for me is for fast backups of many large files.

    I have not tried to boot off of it. If I need to boot off a drive, my drives also have FireWire so I could boot from them that way.
    Mac Pro, MacBook Pro, Mac OS X (10.5.6), PowerBook G4 15" Al, PowerBook G3 FireWire, PowerCenter Pro, PowerBook 160
  • mbean Level 4 Level 4 (1,250 points)
    Currently Being Moderated
    Feb 7, 2009 1:01 PM (in response to Network 23)
    I have not tried to boot off of it.


    The 2-port Sonnet Tempo eSATA card is not bootable. It uses a stock Silicon Image SiI-3132 chip and the Silicon Image drivers.
    Mac Pro 2.8, Mac OS X (10.5.5)
  • rmunde Level 1 Level 1 (0 points)
    Currently Being Moderated
    Feb 17, 2009 12:02 PM (in response to The hatter)
    What is the NewerTech kit you mentioned? Thanks.
    MacBookPro, Mac Pro, 30" ACD, Mac OS X (10.5.6)
1 2 Previous Next

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.