This discussion is archived
43957 Views 117 Replies Latest reply: Dec 17, 2010 10:04 PM by ssphotodesign
Currently Being ModeratedJun 25, 2009 4:44 AM (in response to rbeer)Same problem here with 7.4.2. Two drives (1TB, 500 GB) attached via USB hub to the Airport Extreme.
The drives are visible after a reset of the AE, but the connection drops after 1 min of activity (doing a Time Machine backup or watching a movie from a connected hd for example).
Had reverted today to 7.4.1 and the problem was gone. There's something very wrong with this update.MacBook Pro 15, Mac OS X (10.5.7), 2.4 GHz 4 GB RAM
Currently Being ModeratedJun 25, 2009 7:20 AM (in response to vabaist)I have had the same problem. I found that the only way to resolve is to reboot the Airport Extreme, or power down|up the drives.
Before 7.4.2, I have had 2 USB drives and a printer connected to it that have worked without incident. One of the HDD is used with TimeMachine without incident, too.
7.4.2 definitely appears flakey. I will likely downgrade.MacBook Pro 15", Mac OS X (10.5.7), Airport Extreme
Currently Being ModeratedJun 25, 2009 7:35 PM (in response to rbeer)Immediately after doing the 7.4.2 firmware upgrade to my Airport Extreme, I wasn't able to see or access the external HD (MyBook 1TB) anymore. Even resetting the Airport didn't do it. Disconnecting the external drive's USB cable from Airport didn't do it.
What DID do it was unplugging the power cord from the external hard drive and reconnecting it. After that, everything was back to (almost) normal.
My internet connection DOES seem slower, though, after the firmware update.MacBook Pro 17", Mac OS X (10.5.2)
Currently Being ModeratedJun 25, 2009 8:33 PM (in response to UncleBrian)My external drive has a power switch, and turning on and off, or restarting the base station did bring the drive back up, but it would disappear after a few minutes. Reverting to 7.4.1 fixed the issue. I was able to back up after 2 days of not being able to.C2D iMac, C2D Mac Mini, Mac OS X (10.5.7)
Currently Being ModeratedJun 26, 2009 4:09 AM (in response to rbeer)I've had the same problems, I might have to revert to an earlier version. Seems to get a Time Machine backup done OK, but then vanishes from the network. Still operates as an access point, and reboot brings the drive back online.MacBook C2D, Mac OS X (10.5.7)
Currently Being ModeratedJun 26, 2009 5:28 AM (in response to rbeer)I, too, have the same problem my AirPort Extreme dropping the drive connection with 7.4.2. Have tried everything I can think of, including deleting possibly offending software. No luck. Reverting to 7.4.1 solves the problem.MacBook Pro, Mac OS X (10.5.7), 400GB external drive in Newer miniStack V2
Currently Being ModeratedJun 26, 2009 9:20 AM (in response to rbeer)I have the same problem as described by others in this thread. A WD MyBook 500GB and a 1TB WD green drive in a Vantec enclosure are connected to my AEBS through a Belkin powered USB hub.
As soon as Time Machine starts backing up to the MyBook, the MyBook connection drops, and then about 30 seconds later, the connection to the 1TB drive drops as well.
Reverting back to 7.4.1 got everything working again.2006 Mac Pro, Mac OS X (10.5.7), Mac mini, iPod touch, iPhone 3GS, etc.
Currently Being ModeratedJun 27, 2009 8:37 AM (in response to DougZ)USBStorage_Unavailable_After7.4.2 ++;
I have a 500GB USB drive attached to the AirPort Extreme. I had Time Machine working fine right up until I did the firmware update (7.4.2) to the AirPort Extreme. Now, backups periodically fail with an error message stating the disk can't be found - network connection was lost. At this point the drive is no longer mounted. Rebooting the AirPort Extreme will enable the disk to be remounted.iMac G5, iMac, MacBookPro, Powerbook, Mac OS X (10.5.7)
Currently Being ModeratedJun 27, 2009 10:38 AM (in response to rbeer)Same story as everybody else, except I got a feces sandwich with mine. Like always, I updated to 7.4.2 without hesitation. Within minutes, Time Machine started doing it's thing, then AirPort dropped the connection, then my backup became corrupted. I tried restarting the AirPort a few times, hoping it was a hiccup, with no luck. Downgrading back to 7.4.1 restored the drive sharing, but still left me with 48 hours of repairing the sparse bundle containing the Time Machine backup.
7.4.2 is not ready for prime time!!!!MBP, Mac OS X (10.5.7), 1st gen Airport Extreme (802.11n)
Currently Being ModeratedJun 27, 2009 5:04 PM (in response to rbeer)Same issue for me. After upgrading to 7.4.2 I can see initially the AE attached USB HD (LaCie 500 GB) but as soon as the usage increases (download or TiVo streaming or time machine backup), the HD gets unmounted and disappears form the network view causing all applications to fail.
I downgraded now to 7.4.1 and all is back working fine.
I am using my AE on 5GhZ N.
GGMacBook Air, Mac OS X (10.5.7), Airport Extreme, Network HD LaCie 500GB
Currently Being ModeratedJun 27, 2009 11:28 PM (in response to rbeer)Me too. I have a MiniMax HD which either fails to mount / cannot be seen by TM on iMac (even though I can see it via the airport or there is a message saying the network was interrupted.
Changing back to 7.4.1 is my only option.iMac Intel 20" DC, 1GB RAM, Mac OS X (10.5.7), iPod 30GB, iMac DV 400, Airport Extreme N, Airport Express (Airtunes), iPhone
Currently Being ModeratedJun 27, 2009 11:34 PM (in response to Lars Pope)Don't know if it helps you guys, but I have an Airport Extreme using 7.4.2, and my HDDs connected via USB Hub still works without issue.
1TB WD Drive - FAT32
750 WD Drive - HFS+ (Time Machined Backup Drive)
No problems connecting to either.
Wireless printing still works okay too.Late 2008 Unibody MBP 2.53GHz, Mac OS X (10.5.7), 9600GT 512MB, 4GB DDR3, 500GB 7200RPM HDD
Currently Being ModeratedJun 28, 2009 12:49 AM (in response to JStroud)Thanks. Decided to try one more time with 7.4.2, reset my Airport and started again.
Connected the HD to the back of my mac then found a load of files in the trash so deleted them.
Set it up as a TM again (kept the original Sparse bundle file). The re-connected to the airport.
First back up was ok. lets see if it mounts automatically....iMac Intel 20" DC, 1GB RAM, Mac OS X (10.5.7), iPod 30GB, iMac DV 400, Airport Extreme N, Airport Express (Airtunes), iPhone