Skip navigation
This discussion is archived

Connection Failed - Airport Extreme

13225 Views 17 Replies Latest reply: Oct 9, 2009 2:23 PM by cooperate RSS
1 2 Previous Next
jwilker Level 1 Level 1 (5 points)
Currently Being Moderated
Jul 17, 2009 2:51 PM
I started to notice this after the last Firmware update I think. I've got a unibody Macbook, Airport exreme basestation.

Every few hours, i lose my connection to the base station, but not wireless. Internet is fine, i can get to iDisk, but I can't reach the AP or the Drobo hung off it. Time Machine fails, etc.

Airport utility works, I can connect and update the device. Sometimes simply forcing it to cycle works sometimes I have to unplug it. In both cases a few hours later, "Connection Failed"
unibody MacBook, MacBook Air, iPhone, iTouch, Mac OS X (10.5.6)
  • Helmut Reininger Calculating status...
    Currently Being Moderated
    Jul 28, 2009 10:03 AM (in response to jwilker)
    I seem to have exactly the same problem. Still looking for a solution though. Time Machine fails and it's impossible to mount the HDD via the Finder's Connect To... dialogue. Only thing that helps is doing a reset via Airport Utility.

    There are three possible causes:
    1. I turned off the Airport base and HDD during a 3,5 week long trip in order to save energy.
    2. During that trip I got me a new MacBook Pro. Maybe this caused the problems ...
    3. Right after setting up my MacBook Pro I did a lot of updates incl. the Airport Extreme Software Update to 7.4.2

    I notice that Time Machine fails since that is my primary use of the wireless HDD.

    Any help will be appreciated.
    MacBook Pro 15" 2.8 GHz Intel Core 2 Duo, Mac OS X (10.5.7), Airport Extreme 802.11n (Fast Ethernet) Software V 7.4.2
  • Alex Little Calculating status...
    Currently Being Moderated
    Aug 1, 2009 11:16 AM (in response to jwilker)
    Same exact problem. Since the last firmware upgrade my AirDisk is behaving exactly as described above -- making Time Machine worthless! It cannot back up anything!
    Macbook, Mac OS X (10.5.7), AE + USB HD
  • newcork Calculating status...
    Currently Being Moderated
    Aug 2, 2009 5:41 AM (in response to jwilker)
    same problem, it's definitely the firmware. i put it back to 7.4.1 using airport utility and the problem went away.
    MacBook Pro, Mac OS X (10.5.7)
  • Helmut Reininger Level 1 Level 1 (0 points)
    Currently Being Moderated
    Aug 2, 2009 6:53 AM (in response to newcork)
    Where did you get the old firmware from? I searched around on apple.com but could not find a download link for it. Can you post a link here, please?
    MacBook Pro 15" 2.8 GHz Intel Core 2 Duo, Mac OS X (10.5.7)
  • Patrick G. Gaerlan Calculating status...
    Currently Being Moderated
    Aug 8, 2009 5:08 AM (in response to jwilker)
    I have the exact same problem you guys mentioned. "Connection Failed" error after a while, unplugging the USB hard disk gets it working again. It only started after I upgraded to the last firmware version (7.4.2). Will attempt to downgrade to 7.4.1.
    15" MacBook Pro 2.4" unibody, Mac OS X (10.5.8)
  • CATMac69 Calculating status...
    I've had the same problem since the OS update. My internet works fine, but I can't connect to the Time Capsule to back up, nor will Itunes fine remote speakers connected by airport express. I've found that this only happens when I have the charger disconnect. When I plug in, I can back up and connect to speakers.
    MacBook, Mac OS X (10.5.6)
  • SJC1970 Calculating status...
    Currently Being Moderated
    Sep 5, 2009 6:55 AM (in response to jwilker)
    Me too. Exactly as described elsewhere except that I don't get anything like a few hours before the issue appears. I've just downgraded the firmware so fingers crossed. Thought I'd post in the hope it'll be properly corrected in a future update
    13" Macbook Pro, Mac OS X (10.5.8)
  • catsaver Calculating status...
    Currently Being Moderated
    Sep 7, 2009 7:07 AM (in response to jwilker)
    How does this relate to "AirPort for Windows"?
    Windows XP Pro
  • count_schemula Level 1 Level 1 (5 points)
    Currently Being Moderated
    Sep 9, 2009 12:00 AM (in response to newcork)
    Reverting to 7.4.1 from 7.4.2 fixed my issues as well. I was getting "connection failed" and when I unplugged AP or otherwise reset it, connection only lasted a few minutes.

    Thanks. 7.4.1 Firmware FTW!

    Message was edited by: count_schemula
    MacBook Pro 2.4GHz Penryn, Mac OS X (10.6), 4GB, original video card
1 2 Previous Next

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.