mac pro and viewsonic vp930b lcd display
mac pro and viewsonic vp930b lcd display
i have two monitors set up, a viewsonic vp191b and a vp930b lcd, connected via both dvi ports on the mac pro. the vp930b when the computer goes to sleep cycles on and off with the input message. if i put the mac pro to sleep via the menu sleep command, the last graphic/image on that monitor flashes on and off until i power the unit off, then it cycles on and off with the input message.
the problem is, the mac pro is not letting the display enter full low power mode and is sending some kind of signal still causing a cycle. the monitor works fine on other computers, the G5 i had pervious, and others i test. i tried switching ports and re-routing the cables, same result, the vp930b is still not allowed to enter full low power mode and starts an endless cycle of the monitor going from low power mode back the input mode.
Message was edited by: tara ntula
i have two monitors set up, a viewsonic vp191b and a vp930b lcd, connected via both dvi ports on the mac pro. the vp930b when the computer goes to sleep cycles on and off with the input message. if i put the mac pro to sleep via the menu sleep command, the last graphic/image on that monitor flashes on and off until i power the unit off, then it cycles on and off with the input message.
the problem is, the mac pro is not letting the display enter full low power mode and is sending some kind of signal still causing a cycle. the monitor works fine on other computers, the G5 i had pervious, and others i test. i tried switching ports and re-routing the cables, same result, the vp930b is still not allowed to enter full low power mode and starts an endless cycle of the monitor going from low power mode back the input mode.
Message was edited by: tara ntula
mac pro 2.66, Mac OS X (10.4.10)
