Brother Control Center not functional with MFC after upgrading to leopard

Where is the control center located? I upgraded last night and now cant find it.....

Frustrating

Looks like it is unsupported under Leopard. You can still scan via TWAIN using Image Capture, though.

My Brother MFC unit is working just fine. I never liked the intrusive Brother application anyway. It seems to work fine without it, thank goodness.

On my system:

HD>Library>Printers>Brother>Utilities. BTW, mine appears to work fine - Rev 2.4.3

I was having the same problem. Could not scan with the control center initiated on my computer or with the scan to PC feature on the MFC itself (MFC-9420cn).

I went to the brother web site and updated both my twain drivers, and the remote setup application. The remote setup application now works properly (I'm connected over a wireless network), and the control center is now functioning as well.

Hope this helps, good luck!

Here is the link:

http://welcome.solutions.brother.com/bsc/public/us/ca/en/dlf/downloadindex.html?reg=us&c=ca&lang=en&prod=mfc9420cnall&type2=1&os=81&flang=English&dlid=

I installed the updated driver and my MFC-9420 works fine.

I've been having similar but potentially more comprehensive issues. I downloaded the post-leopard brother scanner update, which gave me control center 2 (for scanning, custom scanning, fax, etc). When I first turn on my computer I can usually get it to scan at least once. The second attempt to scan from the control center software often, if not always, ends up in errors - "check the i/f connection", "please turn the device off and on", and "restart your computer". I have a MFC9700. Very frustrating. I've re-installed the brother driver several times, turned on and off my computer and printer in all combinations, closed and re-opened the control center with printer attached an unattached, etc...

Any thoughts out there other than the software / control just doesn't work well?

THIS IS LAME! Thanks for telling us.
And what is "Specify your Machine by Name mdns service name"

None of these selections on the "device panel" actually reveal the printer when hooked up to a Network.

I'd like to use this on the network router so all of the macs can use this printer. The USB cable works fine. (I wish the printer would print a half-tone worth a dang)

OH BROTHER.

"Hello I'm a Mac....and I'm a PC"

I have spent all day trying to find the brother control center and getting it to load on my mac 10.4. It is not in library under brother but I do have the printer DCP 7020. I have loaded and reloaded and downloaded from site and still cannot get the Control Center up so I can scan. Help

the link posted above took me to it... start at your hard drive root and then go to >Library>Printers>Brother>Utilities>Control Center>Control Center.app

Thks for the guide. I was looking for the path to the Control Center & I found how to do it here.

Here is what I did to download and install the Brother Control Center on OS X Leopard:
http://www.parkerwallace.com/BrotherControlCenterMacOSXLeopard

I have a Brother MFC-5440CN and I can not get Control Center to launch for the life of me. I've upgraded the Remote Config package and the TWAIN driver and still nothing. Yes I can scan using Image Capture but how do you save the image once it's scanned?

I tried all the fixes recommended but still can't open control center. I see the icon sitting up there in the menu bar but it won't open. I even see the control center panel briefly flash open while the computer is booting up, then it is gone. I found the control center on the root hard drive, tried to click that, and it still wouldn't open. Ideas?

That Parker Wallace link worked perfectly for me. FYI: Just go ahead and use the updated method on the bottom.

Thanks for the tip Deciduous!!!

DM