Parrot Easy Drive

My iPhone don't work whit my Easy Drive Parrot Bluetooth. They can conect each other, but then when I make a call the sound dos not go to the spaker. Help Please.-

IPhone, Windows XP

Posted on Dec 24, 2007 8:54 PM

Reply
13 replies

Jan 11, 2008 8:45 AM in response to George Powers

Why yes, I know how to update the Parrot's firmware. Thanks for asking.

First find a laptop running Windows XP that has bluetooth and runs Windows XP, is all up-to-date, and isn't full of malware. I used a ThinkPad T41p. I also had to download and install the bluetooth software from Lenovo and turn on the bluetooth radio, but that's another story.

Then get the fine manual, here:

http://www.parrot.com/download/HTMLUpdate_Procedure/Parrot_3200_update_procedureen.pdf

Read the manual, and follow the directions. I've elaborated below, based on my particular experience.

Then download and install the Parrot update tool, here:

http://www.parrot.com/usa/support/downloads

Install it, run it, and follow the directions through the point where you download the image for your particular Parrot model (3200LS Color in my case). Remember where it stores the image file.

Now take your laptop to your car, and proceed with the update procedure. You can restart the update tool if you like, and get the image from your disk instead of downloading, so you don't need the Internet in your car.

Following the fine manual, you start up the Parrot unit (typically by starting your car), use the Parrot's Setting menu to start the software upgrade, pair with the laptop, and after a few minutes of bluetooth data transfer, the unit will reset itself, go blank for a couple minutes, then spring to life running the new software. It is probably a VERY BAD THING to turn off your car after the download while the Parrot unit is blank, running it's actual update. But the manual is not very clear on this point.

My idiot laptop went to sleep during my first upgrade attempt, and aborted the download. Luckily this is not fatal, and I made it work the second time around by putting the laptop power/sleep setting in "presentation" mode.

Maybe this procedure would work running Windows inside VmWare or Parallels, but I had a real PC, so why look for trouble. Maybe someday Parrot will make actual Mac software.

And the best part is, after the upgrade, my 3200LS Color now works with my iPhone.

Jan 15, 2008 10:02 AM in response to tsloeza

Hi tsloeza!

I tried exactly that. I did record all those names like phone etc at first, but after pressing the green dial button, It does not accept the command "phone". All I can do is call out "a name", and then it starts dialing the first number of that particular name, although that name has several numbers in store, like home-work-mobile etc....
Maybe an "iPhone-Parrot" issue. ?!?!?!

Thanks for your input!

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

Parrot Easy Drive

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.