Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

basic set up to play a instrument (gtr)

I hooked right up to garage band and plugged my firewire 410 in and was playing my guitar in minutes.
I load up logic express 8 and for the last week, i have not one sound coming out of my guitar!!!
WHat doi need to do? I get signal to th 410, but nothing in logic???

imac, Mac OS X (10.5.3), none

Posted on Jun 5, 2008 6:44 PM

Reply
Question marked as Best reply

Posted on Jun 6, 2008 10:06 AM

Have you made sure that the input on the I/O channel strip setting (bottom left of the screen) is set to the corresponding input on your interface? If you don't know which input your guitar goes in through, then try each one individually making sure that you click the record enable button each time on the actual track to see the signal is going through. Also, is your interface the default device/ enabled in the audio preferences window? Try that out. Good luck
2 replies
Question marked as Best reply

Jun 6, 2008 10:06 AM in response to alti2d1

Have you made sure that the input on the I/O channel strip setting (bottom left of the screen) is set to the corresponding input on your interface? If you don't know which input your guitar goes in through, then try each one individually making sure that you click the record enable button each time on the actual track to see the signal is going through. Also, is your interface the default device/ enabled in the audio preferences window? Try that out. Good luck

basic set up to play a instrument (gtr)

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.