5 Replies Latest reply: Jan 18, 2009 1:18 PM by dogspace
vfxtodd Level 1 Level 1 (0 points)
I want to set up port forwarding on my Airport Extreme, specifically for Port 80. Can someone tell me the steps to enable port forwarding and how I can make sure Port 80 is utitilized?

Thanks in advance.

MacBook Pro 2.4GHz, Mac OS X (10.5.1)
  • Duane Level 10 Level 10 (117,950 points)
    The information you seek about how to forward the port(s) starts on page 54 in "Designing AirPort Networks Using AirPort Utility 10.5 + Windows" (direct PDF download).
  • vfxtodd Level 1 Level 1 (0 points)
    Its working somehow.
  • mamilewski Level 1 Level 1 (0 points)
    Duane, I am currently trying to open a port on an Airport Extreme 802.11n. The current settings only allow IPv6 when I am looking to set it for IPv4 so I can input a IPv4 number. In short I am setting up a Panasonic webcam that I must open a port. I am in the advanced tab of the Airport Utility under IPv6 Firewall, I have added the exception and input the port number under TCP Port(s) am I also supposed to input the port number under UDP Port(s)? Is it incorrect that I input an IPv4 IP when the box is requesting an IPv6 protocol number? It is not straight forward to me.
  • methodshop Level 1 Level 1 (0 points)
    @mamilewski did you ever get your camera to work? im trying to setup my AirPort Express to allow Internet access for a Panasonic BL-C131A Network Camera Wireless 802.11

    im not sure what service to pick or settings to use under the 'Port Mapping Setup Assistant'
  • dogspace Level 1 Level 1 (0 points)
    methodshop: Did you get the BL-C131A set up and accessible from the internet? I have the same camera and when I get to port mapping in Airport Utility I get the error message: "Correct the following errors
    DHCP Beginning Address
    DHCP Ending Address..." Those are the two that are giving me problems. Can't set them so that they don't conflict with the WAN IP Address.