147503 Views 107 Replies Latest reply: Apr 24, 2014 11:55 AM by Luigiview
Currently Being ModeratedOct 16, 2008 9:35 AM (in response to itspaz)Welcome to Apple Discussions!
See this page:
Maybe one of them is closely related to your issue.MBP 15" 2.2 Ghz/iMac C2D 2.17/20 inch/iMac G5 1.8/A/iMac G4/Mac OS 9, Mac OS X (10.5.2), AppleTV, Windows XP & 2000, Canon MX700, Nokia 6085h/Time Cap/Sharp 52D64U
Currently Being ModeratedNov 15, 2008 11:52 AM (in response to itspaz)Just a couple of things to try that may resolve your issue.
Go up to you Blue Apple upper left. Then select Software Update and download all the updates your computer needs.
2nd Go to Google and type in Matshita-UJ-845E and then look for any driver Firmware or Updates available and download them.
3rd Make sure you use high quality media like Maxell 16X DVD-R. Read the packaging and you will see that this media will burn on older and newer burners as well, meaning it will burn at 1X, 2X, 4X, 8X, 16X.
Don't forget to Verify, and Repair Permissions as well, Restart your computer and you should be good to go.iMac G3 350 Blueberry 9.2 & Power Book G4. 17" OS X 10.3.9 AEBS w/Iomega Zip
Currently Being ModeratedDec 9, 2008 8:49 AM (in response to Donald Morgan)I'm having the same problem. I'm using Memorex 16x DVD-R, and i successfully burned a few discs several weeks ago. Now all of a sudden i can't get anything to work. I tried restarts, changing the language of my computer (was suggested on a different forum), but no dice.
I need to have 50 discs burned by tomorrow... this is ridiculous.MacBook Pro, Mac OS X (10.5.1)
Currently Being ModeratedFeb 22, 2009 5:57 AM (in response to itspaz)Just two days ago I ran into this "Sense key" / "cannot calibrate the laser" error. I tried changing the languages (bring English US to top of list in International, according to another forum), reset SMC controller, no dice. I am trying to record a 2.3GB Video TS folder on a TDK DVD+R RW disc (have recently used some from the same spindle with no issues). So far I've gone through 6 of them. Used Toast, Burn, Disk Utility. Never had another issue with either the drive or the batch of discs.
Now, just the other week, I upgraded to 10.5.6 from 10.5.2. Could it be related? I've only now tried to burn an optical disc since the 10.5.6 upgrade.MBP 17" 2.4GHz, PowerBook G4 17" 1.67GHz, Mac OS X (10.5.6), TiBook 550MHz Gigabit Ethernet, B/W G3, Win2K, WinXP
Currently Being ModeratedMar 7, 2009 4:43 AM (in response to Alex Zachopoulos)My Mac Pro developed this "cannot calibrate laser power" as well. Both DVD burners in my machine report the error.
After trying the "toggle language" routine, a lens cleaner and Apple branded media I broke down and called Apple tech support.
First step was to reset the power management. On a Mac Pro that is accomplished by unplugging all the cables and waiting 30 seconds. That did not solve the problem.
The second step was a very illuminating exercise. We determined if my devices can read DVDs. Turns out my drives cannot read DVD-R media on which data has been previously burned. However, they can read OEM DVDs, such as the Mac OS X install disc.
The interpretation is not so clear, but it might suggest something in the optics that are on the ragged edge. Give it a good, robust OEM disc and there is no problem. DVD-R media is maybe just too noisy for it to handle. I'm talking out of my hat here.
Anyway, my machine is still under hardware warrantee and Apple is sending me two new drives.Mac Pro 3.2 GHz, 6 GB RAM, Mac OS X (10.5.6), iMac 2 GHz , 2 GB RAM
Currently Being ModeratedApr 3, 2009 3:29 PM (in response to marine_microbe)Just FYI, A quick, 2 second burst of compressed air into the slot-loading drive on my MBP C2D solved my problems....MB Pro C2D, G5 PowerMac, iPhone, iPod 5G, 1Tb TC, Apple TV, Mac OS X (10.5.6)
Currently Being ModeratedJun 22, 2009 10:40 AM (in response to parkerpress)Thanks parkerpress, I've had this problem for a while. Sprayed some compressed air into slot and presto! Burned without a hitch.
Note for others: position your laptop so the air can is in an upright orientation when you spray otherwise the compressed air comes out foggy.MacBook Pro 2.16 GHz C2D, Mac OS X (10.5.6)
Currently Being ModeratedAug 14, 2009 9:13 PM (in response to parkerpress)Spraying a couple bursts of compressed air fixed my problem too.Mac OS X (10.5.8)
Currently Being ModeratedAug 28, 2009 12:03 PM (in response to parkerpress)Your compressed air solution into the drive slot was very helpful. Thank you for posting.MBP Early 2008, Mac OS X (10.5.8)
Currently Being ModeratedSep 4, 2009 9:16 AM (in response to marine_microbe)I just wanted to share my experience with this issue:
Early 2008 Mac Pro with two 16x SuperDrives (Sony NEC Optiarc 7170A). BOTH SuperDrives stopped working properly at the same time. After a few months of burning only CDs, I suddenly found myself unable to burn DVDs.
I could read and write CDs, but I could only read, not write, DVDs. Attempts to burn DVDs gave the dreaded "could not calibrate laser for this media" message in Finder, Disk Utility, and Burn. (console Burn error: 0x8002006D The device failed to calibrate the laser power level for this media.)
The fact that both SuperDrives went bad at the same time made me think that it had to be either the media or a software/firmware glitch.
I tried Memorex, TDK, and Verbatim media; neither would write. I tried canned air, a DVD-cleaning-disc kit, resetting SMC and PRAM (which of course involved rebooting), the International pref pane trick, even tried flashing the drive firmware with new and old firmware revisions. My last resort was to install Snow Leopard on a blank partition; I still got the same error message when trying to burn a DVD from the brand new, fresh OS install.
It seemed ridiculous to have a $3,000 machine unable to burn DVDs, so I ended up purchasing two new SuperDrives from MacSales/OWC. (Apple Original Pioneer DVR-112D-BK Internal [Black Bezel] 'SuperDrive' up to 16X DVD+/-R, up to 8X DVD+/-RW, Up to 8X Dual Layer +/-R DL, up to 32X CDR/RW Burner.) These were available to ship the same day for $34/ea.
I just received them; it took only 15 minutes to swap out the old drives with the new ones. They work perfectly, on all my media.
I suppose $70 for two new drives is more than worth the frustration of trying to resolve this problem by other means. I hope my experience can help others with this same issue.Mac Pro Quad 3.0 GHz Intel Xeon, MacBook C2D 2.4 GHz, Mac OS X (10.5.8), iPhone, iSight, Various iPods. I was there -- 6/29/07.
Currently Being ModeratedSep 6, 2009 10:40 PM (in response to itspaz)Blowing compress air worked for me! I am so happy now. I tried the moving the languages around trick, but that didn't work (I still find it hard to believe that actually does anything).MBP C2D 2.33, Mac OS X (10.5.8)
Currently Being ModeratedSep 10, 2009 3:24 PM (in response to fusion23)compressed air worked for me as well...guess specs of dust are getting in front of the burner lens which prevents it from calibrating properly and causing this error.MPB 15", Mac OS X (10.6)
Currently Being ModeratedSep 11, 2009 9:18 PM (in response to jstefanop)Didn't have any compressed air but found an old CD laser lens cleaner disk in a box. Ran that through a couple of times and now it works like a champ again. I still think I will blast it with some air in the near future.2.2GHz MBP 15"
Currently Being ModeratedOct 9, 2009 1:55 PM (in response to itspaz)hey all I'm having the same problem "failed to calibrate the laser power level for this media" I tried the rearranging of the languages etc.... I also just tried a philips 6 brush dvd lens cleaner. No luck thus far. I've read that some people tried multiple times but I've yet to have any luck(this is the third go round for the cleaner. I'm burning a playlist/data disk directly from itunes.... cd-r audio cd's work fine burning. but I get the same initializing....blah blah blah...finishing within a few seconds after starting and it kicks the dvd+r out. I'm using memorex 16x 4.7gb 120min dvd's and never had a problem before. I've not upgraded to leopard or snow leopard as of yet.... can anybody please help me? the dvd can read and play movies the cleaner etc.... just not burning. I don't want to go out and purchase more dvds or anything else until i hear from anybody else having this problem.... i'm working on a macbook pro
Model Identifier: MacBookPro3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP31.0070.B07
SMC Version: 1.16f11
Serial Number: W872718WYAL
Sudden Motion Sensor:
can anybody please please please help me.macbook Pro, Mac OS X (10.4.11)