firestudio tube and firebox daisy chain?

Question

Level 1

0 points

firestudio tube and firebox daisy chain?

anyone know how to use the inputs on my firebox at the same time as my firestudio tube. (link the two vs. both to the imac) Read a couple of things about daisy chaining and clock syncing but it seems harder than it should be with hardware by the same manufacturer (the fs tube was clearly intended as a replacement, but now I want more inputs) all responses are well appreciated.

macbook pro 2.33GHz - 2Gb, imac 2.8GHz - 2Gb, Mac OS X (10.4.11), macbook pro on 10.4.11, imac on 10.5.6

Posted on Apr 2, 2009 12:32 AM

Reply

Answer 1

Apr 2, 2009 4:52 AM in response to nathank3

Hi Nathan3, you will find a lot more answers from the website of presonus. As far as i know you will need to install the last driver version of the Tube (V.3.3.1 i think) and firebox interface.. then you will find infos and docs to explain how to chain and use the both interfaces. I know for sure it's possible to chain the firestudio project with the firestudio tube, but i am not aware to do so with the firebox..
http://www.presonus.com/

Reply

Answer 2

nathank3 Author

Level 1

0 points

Apr 2, 2009 10:10 AM in response to home studio

thx for the tip, i'll try it a little later, I had actually already tried the presonus page, but it won't let me post on the forums, keeps saying that I don't have access, still in the moderation queue.

Reply