Previous 1 2 3 4 5 Next 68 Replies Latest reply: Mar 29, 2010 4:44 PM by CalebGilbert Go to original post
  • cshamis Level 1 (0 points)
    It is not a problem with the age of the hardware. This is a problem that exists in SL 10.6.1. The problem does not exist when I boot from my 10.5.6 backup on my external drive on the same machine.

    Message was edited by: cshamis
  • djbutt63 Level 1 (5 points)
    Just a note to say that I have exactly the same issue. Reboot is required to get color output.
  • gustavoe Level 1 (0 points)
    I just found a solution... under Display Preferences I select the TV settings or secondary display, in my case NTSC/PAL and on the Refresh Rate I select 52 Hertz and that did it...

    Hope this helps!
  • cshamis Level 1 (0 points)
    That is strange indeed.
    North American NTSC CRT TVs can't sync on 52 Hz.

    But, in any case, I'm not going to go into the display perferences and flip the screen every time my mac comes out of sleep when connected to my TV. That's completely unsat.

    But, at least it saves me from rebooting until they fix it...

    -C.
  • djbutt63 Level 1 (5 points)
    Interesting, but connected to my New Zealand CRT I only get the options of PAL at 50Hz or NTSC at 60Hz, so that doesn't work for me.... still restarting every time I want to watch something on the TV, no fun at all.
  • ourwinter Level 1 (0 points)
    One more vote for this problem. MacBook Pro, 2.6GHZ, 4GB. The latest problem has been that the screen starts fritzing out and looping, as if I had an old Zenith TV that can't get a good signal. I don't know if it is just me but SLeopard is VERY buggy.
  • Yannis Haralambous Level 1 (0 points)
    I have the same problem: MacOS X 10.6.1, 2.6 GHz Intel Core 2 Duo, 4 Go RAM. I tried all possible settings in the Monitors panel (including PAL/SECAM and PAL/NTSC), nothing changed. I didn't tried to reboot (because I can't simply close all my applications and reboot every time my daughters want to see a movie…). It is really time Apple fixes this bug. Will there be a 10.6.2 coming out soon?
  • Clifford Hill Level 1 (5 points)
    I'm getting the same issue as others in the thread after installing 10.6.1 EXCEPT the output to my CRT television is rainbow colored with the spectrum of colors shifting like a gradient layer in Photoshop from left to right on the screen. However, the desktop and icons are all showing too, but in rainbow hues as does any video played via any application such as Boxee, Front Row, or via a browser, etc.

    I'm simply using the composite video out on the DVI analog video adapter dongle (the large format, not the mini since that came with later MacBook Pro models). When I plug in the dongle, the output is always rainbow colored.

    I tried messing with the refresh rate and other screen resolution sizes in the System Prefs without success. The only solution seems to be restarting with the dongle attached. Seems like this must be 10.6.1 since that installation was the only change before the problem started.
  • smcnichol Level 1 (0 points)
    I'm having the same issue. It seems to rotate between black and white, color hued and blank. It works fine when the LCD screen is opened, so I'm sure it's not a hardware issue. Reported it, hopefully it gets resolved.
  • scott in towson Level 1 (0 points)
    i am using a DVI to video (RCA) to my Sony Trinitron flat screen TV. Everything had been working fine, I would disconnect the DVI and hookup the DVI to video adapter and watch movies on the video 2 channel on my Sony. Then I decided to change the screen resolution so the icons would be bigger on the Sony. Immediately the screen went to black and white and the v-hold began to flicker uncontrollably. There was no way to hook up the TV and navigate the mouse to anywhere as you could not see the pointer with the flicker being out of control. I attempted to change the resolution to every possible setting and refresh rate and nothing. It was as if I had permanently broken the TV or the device or something.

    I did notice the screen settings dialog box was DIFFERENT on the TV, even though I changed nothing from when it was hooked up to the monitor. It said NTSC/PAL and the refresh rate came up as 50 Hz. When I hooked the monitor back up the NTSC/PAL language was gone and the refresh rate was back to where it had been before, usually 60 or 75. There is no 50 Hz option when hooked up to my monitor.

    What do I do? Should i reboot with the TV hooked up?
  • logaan Level 1 (0 points)
    +1 same issue here! I hope apple will fix this soon!
  • J. R. Level 1 (0 points)
    Ditto for me. I am using a mini DVI video adapter to connect my MacBook to my TV to watch my videos. Since upgrading to Snow Leopard, my TV screen goes to black and white, is very fuzzy, and the image is off center. However, restarting while the adapter is connected has not worked for me. I also used the feedback link to let Apple know about the problem.
  • MeMooMeM Level 1 (0 points)
    Yup, same problem here. Happened after Snow Leopard upgrade. It even made me buy a new cable! I also installed Windows 7 with bootcamp, its TV out is just fine... Wait... What? On a MacBook Pro, something works on the Windows side but not on the OSX side? What is happening to you Mac guys!!?
  • Steven Littiebrant Level 1 (20 points)
    Ditto here. An odd bug... makes showing videos a bit annoying.
  • Jobbaman Level 1 (0 points)
    same problem here on an early 2008 macbook pro