AJA Kona LHe with 7.0 driver Freezes display on sleep

Loading the 7.0 drivers causes the display to
freeze the display if the system goes to sleep.

Configuration:
* OS X 10.6 and 10.6.1 Snow Leopard
* Kona LHe board
* 7.0 driver
* Mac Pro
* Intel 2 X 2.66 dual-core xeon processors


Tested by installing a "virgin" 10.6, rebooted,
put the system to sleep. The system successfully
wakes back up multiple times.

Installed the 7.0 drivers:
http://www.aja.com/ajashare/AJAKonaLHe7.0.zip
Rebooted. Put the system to sleep.
Wake it back up (key stroke or mouse)
The display is frozen completely, and displays
only what was on the screen when the machine
went to sleep (the seconds on the time/date
are frozen as of the time the system went
to sleep.)

Rebooted in 64-bit mode. The display is still
frozen after waking up from sleep.

The only thing that changed on this virgin 10.6
install was adding the AJA Kona LHe drivers. There
are no other boards in the computer.

Also tried upgrading to 10.6.1. Same results.

So, do you guys have any tips or ideas
I could try to fix this problem and keep
the system from seizing-up when it goes
to sleep?

For now, the workaround is never spinning
down the hard drives and display. Not very
environmentally conscious. 😉


Thanks in advance for any feedback
or suggestions,

Kurt