How to install AirPort Extreme card in eMac?

I just recently acquired a 2005 G4 eMac (the top-of-the-line model with the SuperDrive and 160 GB hard drive), and I am trying to install an AirPort Extreme card into it. Apparently I think the instructions must differ from this one:
http://support.apple.com/kb/HT2596
Since this is for the older AirPort cards.

I pushed the card in all the way, logo facing downward, screwed in the antenna, etc., but the Mac still won't recognize it! What should I do to get it working?

eMac (USB 2.0 version), Mac OS X (10.4.11), 1.42 GHz G4 processor, 1,5 GB RAM, 160 GB hard drive, SuperDrive

Posted on Jan 2, 2010 2:56 PM

Reply
3 replies

Jan 3, 2010 9:45 AM in response to Wiley207

Numerous eMac users who installed Airport Extreme cards in the past have brought up that the Extreme card is a very tight fit in the eMac Airport slot, especially compared to the original Airport card. Often, the card appears to be fully seated, but is actually some fraction of a millimeter out. After seating the card according to all the instructions, you have to push hard on the edge of the card to get it to really seat all the way, hard enough to just start to push the 50-lb eMac away from you (don't try this with the eMac on the very edge of the table or desk!). I ran into exactly that putting an Extreme card in my in-law's eMac, and I had already read other's warnings; that may give you some idea how firmly you really need to push the card once it feels as if it's seated.

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

How to install AirPort Extreme card in eMac?

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.