Removing Date/Time Stamps from video

There isn't.

BUT -- try adding a widescreen matte to it to make it look Professional... ehem... "Professional." This will cover most of it up.

Then use your motion tab and slide the offending clips down a few pixels to get it all the way out.

You won't miss what you cut off. If you do, just readjust the slide of the image back to get better framing.

Good luck, and welcome to the new and improved boards!!

CaptM

The only other thing I've done before and it's a huge time buster is to duplicate the video and crop an area above or below the date/time. Then slide THAT layer up over the date/time... use a little feather on the edge.

This really only works if you are using a QUICK shot with d/t stamp. If it's there the WHOLE video it will be noticed.

CaptM

I'd try this... won't take long and if you don't like it you just rip it off.

Make your cut normal... just pretend you're going to live with it.

Then

Open a new sequence

Drag the old sequence in

Add a 1.72 or so Widescreen matte

click on the video track

hit ENTER on the keypad (number keypad) to send the video to the viewer

Turn on the Image + Wireframe in the canvas

Use your mouse to drag the image down (won't affect the matte)

Keep going until the d/t stamp is gone.

If you don't like it just go back to your first sequence.

Good luck

CaptM