Apple Milanese Loop not secure
Apple Watch Band Milanese Loop will not lock on watch on one side. Its the band not the watch because all other bands are fine. Anyone had this problem? The other side of the band is fine
Apple Intelligence is now available on iPhone, iPad, and Mac!
Apple Watch Band Milanese Loop will not lock on watch on one side. Its the band not the watch because all other bands are fine. Anyone had this problem? The other side of the band is fine
Look closely at the part of the band which attaches to the watch body, and compare the two parts. You should be able to see the locking tab and compare its movement. If the problem end looks to have all its parts try a rinse in warm water to clear any deposits which may have accumulated in the mechanism.
Look closely at the part of the band which attaches to the watch body, and compare the two parts. You should be able to see the locking tab and compare its movement. If the problem end looks to have all its parts try a rinse in warm water to clear any deposits which may have accumulated in the mechanism.
The magnetic piece should lock on any side. I have the Milanese band and it works fine.
thank you for your reply. I’m not talking about the magnetic end of the strap. I talking about where it attaches to the watch it will not stay in it slides out of the grove on it’s own
Thank you for the clarification. Sounds like you have a defective band.
Thank you so much. Couldn’t see any difference, but took a tooth brush and scrubbed in hot water now it’s tight. You da bomb!!
Not seeing a difference is good, it means nothing has broken off. Hot scrub was the correct next step... because it worked.
Apple Milanese Loop not secure