Apple Intelligence is now available on iPhone, iPad, and Mac!

📢 Newsroom Update

Apple’s all-new Mac mini is more mighty, more mini, and built for Apple Intelligence. Learn more >

📢 Newsroom Update

Apple introduces M4 Pro and M4 Max. Learn more >

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Can I swap a SSD into my late-2014 mac-mini to replace failed HDD?

I've been trying to configure my late 2014 mac mini (8 GB, 1 TB HDD) to allow my wife to work on a mac at home since her old MacBook Air just died. Previously I'd use the mini as a media computer and a Plex server. Anyway, I got it all set up for her, when I noticed the HDD was booting slowly. So I ran First Aid, then First Aid from recovery mode, which both failed. Now I can only boot the machine into recovery mode or safe mode. If I try a normal boot, it stops about 70% through the normal cycle and turns itself off.


So I figure the hard drive is fried. That's two Apple failures in two weeks, machines that have been reliable for years (sigh, are we sure Apples can't get COVID-19???).


I'm trying to avoid buying a brand new machine, and I figure this chassis with a 1 TB SSD would run quite well for what I need, which isn't very intense. I've watched a couple of youTube videos about performing the upgrade. There seems to be a fairly simple upgrade, if you purchase a special cable, to install a PCIE ssd. But it's unclear to me whether that works on a HDD-only mini (Is that why you need to buy the cable, or is there more to it?) and whether the PCIE can be the primary (and only) boot drive.


I've also seen videos about installing a 1 TB SATA SSD to replace the the HDD entirely. It requires completely disassembling the mini and reassembling it. While I'm reasonably handy with this sort of stuff, my confidence of pulling this off is maybe 70%.


Another complicating factor is that I want to run MS Office 2011, which means I should install Sierra or HIgh Sierra at the latest. Third factor is that because this was never a "mission critical" platform for me, I was never running Time Machine. So I'm going to need to install the boot drive from scratch.


OK, so here are my questions.


  1. Does anyone have experience upgrading an original HDD mac mini with a PCIE drive as the boot drive? Does it work?
  2. If that's not an option, is the replacement of the SATA HDD as bad as it looks?
  3. Are there hardware vendors out there that provide good support for this kind of operation?
  4. Any advice on whether I should install Sierra or High Sierra given that running Office 2011 faultlessly is my wife's most important requirement?.
  5. Tips on where to find an install-able image of whichever version I need to install?


Thank you in advance for your help.


Michael



Mac mini, macOS 10.12

Posted on Mar 31, 2020 2:42 PM

Reply
Question marked as Top-ranking reply

Posted on Mar 31, 2020 5:01 PM

Just spent some time studying the OWC website, and chatting with their sales/support. Here's what I think I've learned.


  1. Does anyone have experience upgrading an original HDD mac mini with a PCIE drive as the boot drive? Does it work? - Answer, yes it works fine. Installation is way easier than the conventional drive, and PCIE is faster, but also currently about $100 more/TB. If you have a mini that was not originally spec'd with a PCIE SSD, you need to install a special cable. It's not hard, but it won't work without the cable.
  2. If that's not an option, is the replacement of the SATA HDD as bad as it looks? - Way harder to install. Not recommended for most people. Slower performance but cheaper.
  3. Are there hardware vendors out there that provide good support for this kind of operation? - OWC's website was helpful, included a good video, and the web pages showing the drives were informative..
  4. Any advice on whether I should install Sierra or High Sierra given that running Office 2011 faultlessly is my wife's most important requirement?. -- If you install a SATA drive, you could do either OS. PCIE drives require the APFS file system available only on macOS 10.13 High Sierra or higher.


Given all this, I think I'm going to go PCIE. I'm worried I could brick my Mac Mini if I attempted the full disassembly. PCIE installation is a snap by comparison.


Similar questions

4 replies
Question marked as Top-ranking reply

Mar 31, 2020 5:01 PM in response to FoxFifth

Just spent some time studying the OWC website, and chatting with their sales/support. Here's what I think I've learned.


  1. Does anyone have experience upgrading an original HDD mac mini with a PCIE drive as the boot drive? Does it work? - Answer, yes it works fine. Installation is way easier than the conventional drive, and PCIE is faster, but also currently about $100 more/TB. If you have a mini that was not originally spec'd with a PCIE SSD, you need to install a special cable. It's not hard, but it won't work without the cable.
  2. If that's not an option, is the replacement of the SATA HDD as bad as it looks? - Way harder to install. Not recommended for most people. Slower performance but cheaper.
  3. Are there hardware vendors out there that provide good support for this kind of operation? - OWC's website was helpful, included a good video, and the web pages showing the drives were informative..
  4. Any advice on whether I should install Sierra or High Sierra given that running Office 2011 faultlessly is my wife's most important requirement?. -- If you install a SATA drive, you could do either OS. PCIE drives require the APFS file system available only on macOS 10.13 High Sierra or higher.


Given all this, I think I'm going to go PCIE. I'm worried I could brick my Mac Mini if I attempted the full disassembly. PCIE installation is a snap by comparison.


Can I swap a SSD into my late-2014 mac-mini to replace failed HDD?

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.