I have deleted my hard drive by accident

If your computer has a HDD, then you can't delete it. You can remove it, however. You haven't stated exactly what you did, so I can only make a guess as to what you need to do. Understand, that you have erased your drive. All of your files are gone and cannot be recovered. What you have to do is reinstall macOS. There are two ways. The first assumes you have not lost the Recovery Drive:

Install El Capitan or Later from Scratch

1. Restart the computer. Immediately, at or before the chime, hold down the Command and R keys until the Apple logo and progress bar appear. Wait until the Utility Menu appears.
2. Select Disk Utility from the Utility Menu and click on the Continue button.
3. When Disk Utility loads select the target drive (out-dented entry w/type and size info) from the Device list.
4. Click on the Erase button in Disk Utility's toolbar. A panel will drop down.
5. Set the partition scheme to GUID.
6. Set the Format type to APFS (SSDs only) or Mac OS Extended (Journaled.)
7. Click on the Apply button, then wait for the Done button to activate and click on it.
8. Quit Disk Utility and return to the Utility Menu.
9. Select Install OS X and click on the Continue button.

If the Recovery Drive has also been erased, then you will have to do Internet Recover:

Internet/Network Recovery of El Capitan or Later on a Clean Disk

1. Restart the computer. Immediately, at or before the chime, hold down the (Command-Option-R) keys until a globe appears.
2. The Utility Menu will appear in from 5-20 minutes. Be patient.
3. Select Disk Utility and click on the Continue button.
4. When Disk Utility loads select the target drive (out-dented entry w/type and size) from the side list.
5. Click on the Erase button in Disk Utility's toolbar. A panel will drop down.
6. Set the partition scheme to GUID.
7. Set the Format type to APFS (SSDs, only if installing Mojave or Catalina ) or Mac OS Extended, (Journaled.)
8. Provide a volume name, usually "Macintosh HD."
9. Click on the Apply button, then click on the Done button when it activates.
10. Quit Disk Utility and return to the Utility Menu.
11. Select Install OS X and click on the Continue button.