Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

đź’» pro 2011 apple

I have my fans running constantly what is wrong?I have a picture of the hardware result code.

MacBook Pro 13″, macOS 10.13

Posted on Oct 3, 2020 10:15 AM

Reply
5 replies

Oct 3, 2020 11:04 AM in response to Stv8811

Stv8811 wrote:

I have my fans running constantly what is wrong?I have a picture of the hardware result code.
https://discussions.apple.com/content/attachment/fa07e372-9c7c-40b6-820c-0c5233af74b9






What is the error code?

I can not read the tiny, out of focus, upside down pic....


please advise




To trouble shoot further you can:


—Try a SafeBoot https://support.apple.com/en-us/HT201262

Takes noticeable longer to get to the login screen, does a 5-15 minute disk repair before it fully boots up, and certain system caches get cleared and rebuilt, including dynamic loader cache, etc. Login and test. Reboot and test as caches get rebuilt.


In Safe mode third party system modifications and system accelerations are disabled, it removes malware, etc hampering smooth operation, however a reboot will put it back to normal mode.


This test will tell you if third party interference; extensions etc are not loaded in safe boot mode.



—Test issue in another user (or guest user) account  https://support.apple.com/en-us/HT204443

This will tell you if it a universal issue or isolated to your user/admin account. 



Oct 3, 2020 8:03 PM in response to John Galt

The internet did not upload the photo well.

but I found out the problem was a optical sensor getting static interferences because of no anti conductor adhesive strip under the optical drive.

The apple Hardware test was spot on.

This static interference corrupted the kernels and froze loading everything in general.

đź’» pro 2011 apple

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.