Asus Wifi Router Setup

Please take note of these settings if you have a Asus Wifi Router. I owned a ASUS TUF AX3000 Wifi Router.


Some of the settings are somewhat similar with other Asus Wifi Router.


Unable to Connect to the Internet. Red LED Light on the left side of the router. Go to the Router Settings, Go to Lan, IPTV, Select a Lan port, Select ISP Profile to None. Choose IPTV STB port to None.


Go to WAN, Basic Config to Automatic IP (DHCP) for DHCP. Go to WAN, Special Requirement from ISP, DHCP query to Aggressive Mode, Go to uPNP to DISABLE.


Go to Wireless, general disable Enable Smart Connect. (You can enable them without any problems but if you go into disable Enable Smart Connect you need to take note of these settings)


If you are not using AX Wireless you can disable the 802.11ax. General Bandwidth Enable or Disable 160Mhz. General control set to Auto and select Auto select channel including DFS Channel.


If your Wifi does not support DFS Channel. It is advisable to DISABLE the 160Mhz and DFS Channel. And select control channel to 40 Mhz, protection manage frames to Capable. That will get old wifi devices to connect to your network and including if you are using Raspberry Pi.


This is an Optional but if you need to, you can set Wifi Agile Multiband to Enable and Channel Extension to Auto.


Make sure you change your admin account, so that you can remember them and Make sure you update the Firmware Router if Asus have release a newer version.


If you hooked up to the router and it cannot detect the network. Make sure the RJ45 is connect in the router to your mac and reboot your Mac OS. To get the Ethernet detected. Otherwise you will get Self-Assigned IP Address.


Send feedback to ASUS, if you encounter problems with your Asus Router.

Posted on Jun 30, 2021 7:02 PM

Reply

Similar questions

9 replies

Jul 1, 2021 7:40 AM in response to Clique of One

I agree it was a very informative post. I still want to know what it has to do with Apple. I'm sure ASUS router users found it useful, as is the ASUS manual. There are hundreds of third party products that work with Apple products. If posters posted unsolicited info from the 100s/thousands of manuals here in these Apple communities you would not find these communities as useful.

Jul 1, 2021 7:51 AM in response to BobTheFisherman

BobTheFisherman wrote:

If posters posted unsolicited info from the 100s/thousands of manuals here in these Apple communities you would not find these communities as useful.

Absolutely agreed. Not to mention which, the search capabilities of this forum are, to put it bluntly, awful so very few people of the few who would think to look here for such instructions will find it. A post like this, however well-intentioned, will sink into oblivion within days, if not hours. On the other hand, a Google search would find the manual in seconds.

Jul 1, 2021 8:08 AM in response to Clique of One

Clique of One wrote:

And since I presently own seven Apple products (Note, presently), that also receive Wi-Fi from a Asus router, I firmly believe that MRusliDarwi has every right to supply helpful advice on this site.

No one has a "right" to post anything here. Ultimately, it's all up to Apple to decide what falls under " Apple Support Communities is here to help people use Apple products and technologies more effectively." However, as the post is innocuous, it is unlikely to be removed.

Jul 1, 2021 8:18 AM in response to Clique of One

OK, I will post a lengthy unsolicited random instruction about proper use of a canon printer. How would that be helpful or of any value in an Apple product help community. If someone asked about a specific issue with a canon printer and I responded then my post may be helpful. But random posts of information available in a product users manual do not add to the usefulness of these communities.

Here you go:

"Where you put a WiFi extender is key to its success, so keep an open mind

and be ready to move your extender around if the results are

disappointing. Start with a floor plan or sketch of your abode marked

with the router’s location, the dead zones and AC outlets. Look for a

power outlet that’s roughly halfway between the router and where you

want the extender’s Wi-Fi signal to go. Plug in the extender and follow

the directions for linking it with your router. Once it’s operating, go

to the dead zone and see if it’s been enlivened with Wi-Fi."

Was that random post helpful to you or the communities?

Jul 1, 2021 8:19 AM in response to Clique of One

Clique of One wrote:

Google search has become a joke!

So use a different search engine if you prefer.

If you don't like, then ignore it and move on without commenting.

I chose not to.

If by doing so, keeps your points level down, so be it.

Despite having been here a while, you appear not to understand how points are awarded. Most points are awarded by the original poster. They can award one "Solved" (10 points) and two "Helpful" (five points) per thread. Apple Community Specialists can also award a post "Apple Recommended" (7 points, I think). More rarely, if enough people mark a post as "Helpful" using the button below the post, it gets a couple of points. I don't recall the exact number. What this means is that the vast majority of posts never get any points. And the vast majority of people who have been around these forums for a while don't pay much attention to getting points.

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

Asus Wifi Router Setup

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.