Hi guys, i am using a big knob studio to record and i have lost all input in logic pro. in the beginning the light on the track used to light up but now its dead silent. the input on the interface works fine the problem is logic receiving the input. it does the same with the guitar.
MacBook Air 11″, macOS 11.4
Hi,
Few suggestions:
1) First make sure that the interface is selected in Logic Pro : Preferences : Audio : Input and Output Device
2) Make sure you have selected the proper input channel on the channel strip you want to record
3) Review settings for Input Monitoring as well as "Auto Input Monitoring".
4) Arm the track to record, any signal?
Hope this helps.
( If this was helpful please mark as such or mark as Solved if that is the case )
Hi,
Few suggestions:
1) First make sure that the interface is selected in Logic Pro : Preferences : Audio : Input and Output Device
2) Make sure you have selected the proper input channel on the channel strip you want to record
3) Review settings for Input Monitoring as well as "Auto Input Monitoring".
4) Arm the track to record, any signal?
Hope this helps.
( If this was helpful please mark as such or mark as Solved if that is the case )
yeah, it helped i had to turn the gain on the interface all the way up but the recording was still very low. So i decided to return the interface, because the sound was getting distorted.
No signal in audio track
