stuck shift key can't boot into usb install menu or disk utilities

how do I boot into disk utilities or usb installer with a stuck shift key? and its always booting into safe mode I just have to reset nvram to bring it back to normal mode.

is there another way to boot into the usb installer menu without replacing the whole keyboard?

Thank you

MacBook, 10.13

Posted on Feb 18, 2022 1:17 AM

Similar questions

Clean install of Ventura 13.1 freezes at Language selection screen I have created a bootable external drive with Ventura 13.1 for M1 Silicon devices. It successfully installs just fine on MacBook Air (M1,2020), Mac Mini (M1,2020). However when installing on a MacBook Pro - at the language selection screen, as soon as I select a language it freezes for ~20 minutes - the cursor will respond in jerky fashion the whole time but won’t accept input - occasionally showing the beach ball. However, after 20 (approx) minutes, it will drop the language selection screen and show an all grey background (plus jerky cursor) for another 10 minutes, before it finally moves to the next screen and then suddenly installation continues normally.
5252 10
MacBook Pro A1278 will only boot in safe mode, UNLESS I hold down the “command” button while it’s booting up Ok, I’ve been driving myself crazy trying to figure out what is going on with this thing and so I’m just going to post this and cross my fingers. Stats: MacBook Pro 13” Mid 2012 2.5GHz i5 8GB DDR3 Ram Catalina OS 10.15.7 Issue: The issue started when I went to log in to the MBP and my password has capital letters and it wasn’t accepting it. So I went through the process of changing the log-in password and even after changing it, it wouldn’t work. I ended up being able to reset everything and do a clean install of Catalina OS from my M1 Mac Mini and got everything working with a fresh install. I did not restore from any kind of backup and started completely new. I’ve looked up all the different key combinations for starting up an Intel-Based Mac and none of them work, the MBP will only boot into safe mode. Even if I do nothing and just let it boot on its own, it boots into safe mode. I can log in to the MBP but ONLY if I’m holding down the “command” key while it is booting up. Once I am logged in, everything works fine EXCEPT for the left “shift” key. It will not register when I try to type with it and it doesn’t register when I have the digital keyboard on screen showing which keys I’m hitting. *Note* It never occurred to me that the issue could’ve been the left “shift” button all along because I primarily use the right “shift” button.
2930 3
Is it normal to have so many access denied errors due to sandbox for apple system processes? I just did a clean install Ventur and am getting a lot of access denied errors reported for system processes. The clean install involved reformatting the entire internal SSD by choosing the device, not the volumes and then installing from a bootable USB, although I didn't actually boot from the USB, I just did it while I was in Recovery after reformatting the disk - but used the USB files (which I had just created using the create bootable installer tool in the Ventura 13.1 app itself). Is this normal? The error rate is really fast, and at times the fault rate for various system processes is, as well. I'm concerned that either the Mac itself is a lemon, or Ventura is. I should point out that this is a MacBook Pro 14" 18,4 - the 10 cpu/24 gpu M1, with 64 gb memory and a 2 TB drive. I have had various problems - it's now been 48 hours since the install and the battery isn't using optimal charging yet, as it should be by now. I think it is turned on - at least system settings says it is, but cfprefsd is one of the process getting sandbox errors when trying to read my preferences and at least in the case of Allow Remote Access, I had to toggle the switch a couple of times before sshd actually ran. Changing the computer name also seemed to take a while to display correctly, I had to keep changing it back to my desired name because it would revert to the default name. I'm not sure if the Systems Setting is displaying the actual state of various options because of that. This is a MacBook Pro 18,4, with the 10 cpu/24 gpu M1, 64 gb memory and a 2 TB drive.
5274 7

1 reply

my ginger

Level 5

4,948 points

Feb 18, 2022 10:04 AM in response to Adriannick27

You can boot to the installer indirectly by holding down the option key while booting. Till you see the apple logo. then it should show all disk volume options to boot to. Click on the one you want.

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

stuck shift key can't boot into usb install menu or disk utilities

Welcome to Apple Support Community

A forum where Apple customers help each other with their products. Get started with your Apple Account.

Learn more Sign up