I am unable to print from my 9th gen iPad
I have a new IPad Generation 9 and I can’t get my printer to work. Do I need to replace the printer?
I’m
[Re-Titled by Moderator]
iPad, iPadOS 16
I have a new IPad Generation 9 and I can’t get my printer to work. Do I need to replace the printer?
I’m
[Re-Titled by Moderator]
iPad, iPadOS 16
See:
Apple AirPrint is a driverless connection protocol. A high proportion of modern printers intended for Home, SoHo and Business environments now support AirPrint. Check your printer model against this list:
About AirPrint - Apple Support
If your printer supports AirPrint - and is set-up correctly - should you continue to experience difficulties your WiFi Router may be unexpectedly failing to pass Apple Bonjour traffic on you local network - or your WiFi Router or Network Switch may be blocking this (or other) device discovery protocol(s).
This can occur for a number of reasons other than network bridging. Ensure that your wired and wireless network segments are part of the same IP-subnet, are not defined as separate VLANs - or that one or other are defined as “guest” networks, or placed in a DMZ. You may find that your router has a setting that limits/restricts broadcast and network discovery traffic; by example, if your Router has an IGMP Snooping setting, try toggling this or similar settings. Your Router WiFi settings may also have privacy settings that isolate WiFi clients from each other; if present, ensure these settings are disabled.
The Apple Bonjour protocol uses mDNS (Multicast DNS) UDP port 5353.
You may find that restart of your network components will resolve the problem. You’ll need to restart your network devices in the correct order. Assuming that you WiFi Router provides DNS services for your network, restart devices in this order - allowing time for devices to fully boot/restart prior to restarting other devices:
Restarting your iPad, after restarting other devices in the correct sequence, is most simply achieved by a forced-restart of the iPad:
If you continue to have difficulties, check to see if your iPad is using the new WiFi Private Address feature. This feature is intended to provide additional privacy and security when using “public” (untrusted) WiFi networks.
Settings > WiFi > [Your WiFi Network / SSID] - tap the “i” icon - Private Address
The Private Address feature is largely unnecessary for your home WiFi network; if enabled, Private Addressing can interfere with anticipated operation of other devices, such as AirPrint/Airplay. In such circumstances, you may need to disable this feature - and can be enabled or disabled for each individual network.
Use private Wi-Fi addresses in iOS 14, iPadOS 14, and watchOS 7 - Apple Support
If your printer is not compatible with AirPrint, there are alternatives…
Some printer manufacturers have a suitable companion App that provides Print capabilities for mobile devices, often using a web-based print service. Others can print directly if the App supports other network printing protocols. By example, some HP Printers use the HP Smart App - available in the App Store:
https://apps.apple.com/gb/app/hp-smart/id469284907
You might also consider connecting a non-AirPrint printer to a Windows PC or Mac computer - and install a “helper application” that allows the computer to emulate AirPrint capabilities; one such option is Readdle Printer Pro, for which suitable software for PC is available. A link to the PC software is included from this page:
https://readdle.com/printerpro
A further alternative is to consider installing a dedicated Print Server Appliance on your network - and connect your printer to this. One example is the Lantronix xPrintServer.
The remaining solution is to simply replace your printer with one that is AirPrint capable.
See:
Apple AirPrint is a driverless connection protocol. A high proportion of modern printers intended for Home, SoHo and Business environments now support AirPrint. Check your printer model against this list:
About AirPrint - Apple Support
If your printer supports AirPrint - and is set-up correctly - should you continue to experience difficulties your WiFi Router may be unexpectedly failing to pass Apple Bonjour traffic on you local network - or your WiFi Router or Network Switch may be blocking this (or other) device discovery protocol(s).
This can occur for a number of reasons other than network bridging. Ensure that your wired and wireless network segments are part of the same IP-subnet, are not defined as separate VLANs - or that one or other are defined as “guest” networks, or placed in a DMZ. You may find that your router has a setting that limits/restricts broadcast and network discovery traffic; by example, if your Router has an IGMP Snooping setting, try toggling this or similar settings. Your Router WiFi settings may also have privacy settings that isolate WiFi clients from each other; if present, ensure these settings are disabled.
The Apple Bonjour protocol uses mDNS (Multicast DNS) UDP port 5353.
You may find that restart of your network components will resolve the problem. You’ll need to restart your network devices in the correct order. Assuming that you WiFi Router provides DNS services for your network, restart devices in this order - allowing time for devices to fully boot/restart prior to restarting other devices:
Restarting your iPad, after restarting other devices in the correct sequence, is most simply achieved by a forced-restart of the iPad:
If you continue to have difficulties, check to see if your iPad is using the new WiFi Private Address feature. This feature is intended to provide additional privacy and security when using “public” (untrusted) WiFi networks.
Settings > WiFi > [Your WiFi Network / SSID] - tap the “i” icon - Private Address
The Private Address feature is largely unnecessary for your home WiFi network; if enabled, Private Addressing can interfere with anticipated operation of other devices, such as AirPrint/Airplay. In such circumstances, you may need to disable this feature - and can be enabled or disabled for each individual network.
Use private Wi-Fi addresses in iOS 14, iPadOS 14, and watchOS 7 - Apple Support
If your printer is not compatible with AirPrint, there are alternatives…
Some printer manufacturers have a suitable companion App that provides Print capabilities for mobile devices, often using a web-based print service. Others can print directly if the App supports other network printing protocols. By example, some HP Printers use the HP Smart App - available in the App Store:
https://apps.apple.com/gb/app/hp-smart/id469284907
You might also consider connecting a non-AirPrint printer to a Windows PC or Mac computer - and install a “helper application” that allows the computer to emulate AirPrint capabilities; one such option is Readdle Printer Pro, for which suitable software for PC is available. A link to the PC software is included from this page:
https://readdle.com/printerpro
A further alternative is to consider installing a dedicated Print Server Appliance on your network - and connect your printer to this. One example is the Lantronix xPrintServer.
The remaining solution is to simply replace your printer with one that is AirPrint capable.
I am unable to print from my 9th gen iPad