Did you mean control-click-then-delete-item on the password listed in the Keychain list?
Yes.
It may be a good idea to boot from your install disc, run Disk Utility in case there are errors on the star tup disk that need repairing.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
(In Mac OS X 10.4 or later, you must select your language first from the installer menu)
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. Make sure there is always 10% to 15% free disk space
🙂