Latency when recording vocals

I still use Monterey OS in order to use older Akaii drum pads. I have a 2020 iMac pro and Quantum 2626 audio interface…How do I hear myself without latency when recording vocals?

iMac 27″, macOS 12.4

Posted on Apr 29, 2023 11:35 AM

Best reply

BenB

Level 6

12,217 points

Posted on Apr 29, 2023 3:48 PM

You can also just disable any effects on that channel during recording.

View in context

Similar questions

Rode NT1-A and Behringer UMC22 Hi! I just got the Rode NT1-A condenser mic and am using it with the Behringer UMC22 interface. However when I’ve tried to record on Garage Band there is no sound recorded, apart from any taps / movement of the mic wire. Do I need to download a driver? None of the options on Behringer seem to cater to my mac, but I was told it would all be compatible. Any help would be so appreciated!
2351 7
How can I successfully record my dramatic saprano voice on garage band without distortations Are there special settings I must use in Garage Band to successfully record my Dramatic Soprano voice in Garage Band. So far I'am unable to record my voice successfully using an external Yeti Blue microphone with my MacBook.
255 2
NW-700 Microphone with iMac and GarageBand I am using an iMac Retina 5K Late 2015 with the 3.2G i5, 24 GB DDR3, AMD Radeon RD M390, running Mojave 10.14.5, and Garage Band 10.3.2. I am brand new to Garage Band and have a lot to learn. I am using an NW-700 Condenser microphone with phantom supply to the USB port on the rear of the Mac. When I record audio with the internal microphone the recorded audio seems to be in-time with the Jam track I am using. When I try to record with the NW-700 there seems to be a bit of a delay with the recorded audio from the phantom supply interface/microphone combination. The audio is much improved over the internal microphone and since I am on a budget I would like to avoid going with a full recording studio setup if possible. I can adjust the start of the recorded audio, by cutting the leading edge of the recording, sliding the audio to the left so it matches the start of the jam track but that seems to be a lot of trouble. I have the preferences for GB set to: Output device - built in device Input device - USB PnP sound device My recording settings are set to Automatic Level control and the input does show the USP device, Plug-ins are turned off, as is the compressor and eq. Is this a problem with the inexpensive phantom interface? Should I go with something like the Yamaha MG10XU or the Behringer Xenyx 1204USB mixers, or the Behringer UMC22HD audio interface? I play the harmonica and take lessons that require me to record my input with a jam track. Any suggestions? I am a former electronic tech for the USMC so technical stuff doesn't scare me away, just not familiar with this type of setup. Thanks in advance Caitlin
454 2

3 replies

Best reply

BenB

Level 6

12,217 points

Apr 29, 2023 3:48 PM in response to suzygoog

You can also just disable any effects on that channel during recording.

Apr 29, 2023 2:28 PM in response to suzygoog

Like this !

Manage Logic Pro input monitoring latency - Apple Support

suzygoog Author

Level 1

5 points

Apr 29, 2023 6:58 PM in response to suzygoog

Both answers helped a lot. Thanks so much.

Latency when recording vocals