You can make a difference in the Apple Support Community!
When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.
When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.
Hi all
I have a MacBook Pro M1 with a dead screen. How can I access the data on the laptop's disk drive? I'm hoping to be able to connect it with a MacStudio and pull off some important data before it disappears from my possession.
If I succeed in doing that, is there then a way to wipe all my data from the MacBook Pro's disk?
Any help and advice gratefully received!
Ian
MacBook Pro 14″, macOS 13.3
I don’t understand what you mean by “it’s enabled using the GUI”.
Once you attach an external display it should be recognized. There is no such a thing as enabling or disabling external displays, AFAIK.
I don’t understand what you mean by “it’s enabled using the GUI”.
Once you attach an external display it should be recognized. There is no such a thing as enabling or disabling external displays, AFAIK.
Hi Randall_2023
Remote access - no. But the screen is a possibility. I’ve a Studio display. How would I select that as the output?
I should also point out that I had to remove the laptop from my account for an abortive repair, so I can’t remotely wipe it. Really regret doing that now, but it’s done 🙄
You don’t need a Studio Display.
Just about any display will work, even a tv with an hdmi port.
You just need an adapter from usb-c to hdmi or vga, depending on the connection available on the display.
Appreciate your reply. My problem with using this method is that it’s enabled using the GUI.
Are you sure? I have an M2 MacBook Pro with an HDMI port. I connected it to a TV I have never associated with that Mac and it extended the display to that TV.
Hi Luis
Of course, you’re right. Having never had to connect an external monitor before I was over-thinking it. Just plug it in - I used a Thunderbolt cable - and it works. Not what I was expecting but pleasantly surprised.
Appreciate everyone’s time and advice.
Ian
Studio Display - Technical Specifications - Apple (CA)
Three downstream USB-C ports (up to 10Gb/s) for connecting peripherals, storage and networking
See if you can connect via Target Disk Mode . Just proceed as if there was a working screen and then see if it shows up as an external drive on the Studio.
See if this helps: Transfer files between a Mac with Apple silicon and another Mac
Hi Dialabrain
Thanks. That's a great article.
However, it needs a working screen to follow that route. I'm hoping there's solution I can use with key presses.
Ian
Do you have an external monitor you could use by chance? To connect to the MBP? Or could you possibly use Remote Login if that was enabled on it? Just a couple of possible ideas.
You're welcome. Sorry, I didn't read through the article. I don't know of another way.
Hi Luis
Appreciate your reply. My problem with using this method is that it’s enabled using the GUI. My laptop screen isn’t working so I’d need to enable the external monitor using the keyboard.
Ian
FWIW, as I mentioned earlier, there is no way without a working screen. Sorry.
Hi
I can’t find an emoji for a depressed look, so just imagine it.
Thanks anyway 👍
Ian
Macbook Pro M1 - access disk with no screen
