driver per mac os ventura della stampante HP laserjet 1020

Hello,

Drivers from HP for the LaserJet 1020 printer appear to be available for Windows and Linux only.

You could perhaps carry out a test using drivers for the HP LaserJet 1022 instead.

Unfortunately, the latest driver from HP seems to be for macOS 12 Monterey:

https://support.hp.com/us-en/drivers/selfservice/hp-laserjet-1022-printer-series/439424/model/439431

A driver for macOS 12 Monterey may or may not work with macOS 13 Ventura. It would be entirely experimental.

There is also an HP 5.1.1 Printer Software Update from Apple. An HP LaserJet 1022 version 1.6.1 driver is listed in the referenced article Printer and scanner drivers for Mac - Apple Support. However, the System Requirements say Not compatible with macOS v12 and newer. If you try it anyway, it would be experimental as well. It may not open/install/work with macOS 13 Ventura. So, do not expect too much from this.

As always, make sure that you have backup copies of all important files before testing anything. Software conflicts cannot be ruled out.

You may have to reset the printing system between tests.

Reset the printing system on your Mac to solve a problem – Apple Support (UK)

Add a printer to your printer list so you can use it on Mac – Apple Support (UK)

[Edited by Moderator]

Check out this article to see if they will offer any drivers for legacy printers. (Note the website 123.hp.com)

https://support.hp.com/us-en/document/ish_2635044-2489772-16

Thank you for the report. Did you try the 1022 driver from the HP support site or the one from Apple (they may even be the same)? Did it work well, apart from duplex?

There is a Gutenprint driver hp-lj_1022 for the HP LaserJet 1022, but it is unknown to me whether it would work with anything later than macOS 10.14 Mojave. I have no idea about any difference regarding two-sided printing, though. Also, I do not normally recommend downloading printer drivers from other sites than the printer manufacturer or Apple.

According to the specifications, the printers as such appear to have Duplex printing Manual (driver support provided).

https://support.hp.com/us-en/product/product-specs/hp-laserjet-1020-printer-series/model/439428

https://support.hp.com/us-en/product/details/hp-laserjet-1022-printer-series/model/439431

Possibly only with PC drivers? As I mentioned earlier, the 1020 is for Windows and Linux anyway.

I've been using the 1022 for many years through a number of Macs and versions of macOS. I can guarantee you that I have never seen a duplex printing option, manual or otherwise, and I have searched diligently.

I believe you, but can only go by the information provided by HP. See also the link to the manual right above (page 42f). A general article https://support.hp.com/us-en/document/ish_2486497-2193233-16 has some not very clear lines like "If the neither option is available, continue with these steps to print manually on both sides of the paper." and "If the Two-sided or Double-sided options are not available, select Paper Handling from the print options menu.".

1020 and 1022 do not support two sided printing. I own a 1022 that is working as it should on macOS 13.5.2

http://h10032.www1.hp.com/ctg/Manual/c00264442.pdf#d0e4384