Will the Milanese band from my Apple Watch series 6 fit on my new Apple Watch series 9?

The bands should all fit, they didn’t change any of the ways that the watch connect to the watch. You are going to have to make sure that they have the same size case, or the watch band will fit funny where it connects to the watch, but it will still work.

For instance if you have the smaller 41mm watch, all of the smaller watch bands will work (40mm, 41mm, 42mm). If you have the larger watches then the bands will all fit all the larger models including the Ultra. So in short it will work, but you’re going to want to make sure that they body of the watch is the same size such as the smaller or larger screen size. It will still fit either way if you went to a smaller or larger watch but the bands then wouldn’t match the end of the watch correctly. If it’s a small size watch that you had and you go to the larger watch, then the band won’t line up with the end of the watch. If it’s a larger watch you had and you go with the smaller face when you upgrade then the edge of the band will stick out a little on the watch. As long as you stick with the smaller or larger watch, then the band will fit like it is supposed to.

I have a series 6 watch, just upgraded to a series 9 Apple Watch.

I wanted a black band and there wasn’t one available. So I used my band from my series 6 on the 9 and it worked perfectly.

but I did try to buy the correct size at target and it fell off. Luckily I was at home.

Think as long as it’s an apple product it works

I looked up that band on Amazon. There, they say the band will fit all the Apple Watches, including the 9.

There are two widths. You need to go from small case 7 to small case 9, or large case 7 to large case 9

Let's see what series 10 brings